A new improved body-centered cubic (BCC) lattice structure is proposed to improve the load capacity by adding a body-centered ball to reduce stress concentrations. The new lattice structure, named as body-centered cubic with balls (BCC-B) lattice structure, is characterized by lightweight, compactness, large load capacity, radiation resistance, and corrosion resistance, which can be widely used for vibration isolation in various areas such as ships, aerospace, nuclear facility, and so on. Theoretical model of BCC-B lattice structure is established. The influences of structure parameters of BCC-B lattice structure are analyzed by both theoretical and numerical methods. Both BCC and BCC-B lattice structure samples are prepared by using Ti-6Al-4V, of which the stiffness, rated load capacity, and yield strength are tested and compared detailly. Compared with the BCC lattice structure, the BCC-B lattice structure shows a 31.58% increase in rated load capacity, a 10.15% decrease in natural frequency, and a 29.53% increase in yield strength. This study might provide some insights for the development of vibration isolators with large load and low stiffness for applications in extreme environmental conditions such as limited space, nuclear radiation, and high temperatures in future.
The inherent damping deficiency in metal lattice structures leads to inadequate attenuation of both resonant peaks and shock-induced vibrations, significantly limiting their effectiveness in vibration isolation and shock resistance applications. To address this limitation, we developed a novel parallel polyurea method that utilizes the viscoelastic energy dissipation mechanism of polyurea to substantially improve structural damping performance. The metal lattice–polyurea parallel vibration isolation system was designed with its theoretical model established to characterize damping properties, vibration isolation, and shock-resistant performance. An experimental setup was developed to validate theoretical predictions through controlled semi-sinusoidal shock and swept-frequency tests. Experimental results demonstrate excellent agreement with theoretical predictions. The introduction of the polyurea damping structure significantly enhances the system’s damping performance. Compared to the conventional metal lattice isolator, the proposed metal lattice–polyurea parallel composite structure shows remarkable damping improvements: under shock excitation, it achieves substantial attenuation of peak response amplitude with accelerated decay rate, while under frequency-sweep excitation, it maintains the original resonance frequency but reduces the transmissibility peak significantly.
23 November 2023 in International Journal of Structural Stability and Dynamics