Desalination of seawater is a promising response to solving the lack of drinkable water. The separation of cations and anions is carried out by inserting a desalination cell in the middle of a novel design of photoelectrocatalytic desalination cell (PEDC). Different parameters were evaluated and optimized for increasing the capability of system to desalt hypersaline water. Ultraviolet illumination (UV) was used as the driving force, exciting coated titanium nanotubes on the anode electrode, producing electron/hole pairs that degraded organic matter. Methylene blue degradation by UV irradiation was performed, owing to a high salt concentration level, and desalinated to produce electrical current. Performance of PEDCs was investigated by salt content, pH, and ion-exchange resin. The results indicated that higher total dissolved solid (TDS) removal occurred in acidic environments in anode chamber whereas the maximum produced electrical current occurred in alkaline environments in the cathode chamber. Also, the higher amount of salt content in the middle chamber resulted in the high TDS removal until the amount of electrical conductivity in the middle chamber reached 190 mS/cm. The TDS removal rates with and without using resins in the middle of the desalination cell after 10 days were 70.69% and 51.37%, respectively.
Industrial munition facilities are increasingly manufacturing insensitive high explosives (IHEs) to improve safety. The explosive residues in wastewater from these facilities are treated to meet regulatory standards. However, the resulting effluent contains elevated levels of mineralized nitrogen species. This study evaluated the potential of vetiver grass (Chrysopogon zizanioides), a non-invasive perennial species, to remove high concentrations of nitrate, nitrite, and ammonium from munition plant wastewater. Vetiver was grown hydroponically in synthetic wastewater containing high levels of nitrogen compounds simulating munitions plant effluents. Vetiver plants were treated with one nitrogen species at a time, with concentrations ranging from 165 to 24,700 mg N/L of nitrate, 100 to 4000 mg N/L of nitrite, and 260 to 39,000 mg N/L of ammonium. Nitrogen concentrations in the media and plant responses were monitored over time. The results showed significant nitrogen removal at lower concentration ranges. When concentrations exceeded 3800 mg N/L of nitrate, 800 mg N/L of nitrite, and 2600 mg N/L of ammonium, the removal rates declined after 7 days. At higher nitrogen levels, vetiver exhibited stress symptoms such as chlorosis and elevated antioxidant enzyme activity. Our study demonstrates the potential of vetiver grass in treating nitrogen-rich wastewater from the munition industry and provides a baseline for future large-scale studies to optimize the technology.
Industrial munition facilities generate nitrate-rich wastewater that requires effective and sustainable treatment before discharge. While vetiver grass (Chrysopogon zizanioides)-based phytoremediation has shown promise in nitrogen removal, most studies have been limited to small-scale experiments under low nitrogen concentrations, providing limited guidance for system-level design under elevated loading. This study evaluates a greenhouse-scale phytoremediation system using vetiver grass to treat wastewater containing 1000 mg N/L nitrate and 50 mg/L COD. Plant coverage densities of 2%, 4%, and 6% (w/v) were assessed to quantify optimum density as a design parameter for optimizing nitrate removal. A 6% coverage achieved the highest efficiency, reducing nitrate by 75% to 253 mg N/L over four months. Plant growth, chlorophyll, protein content, and antioxidant enzyme activity were analyzed to elucidate physiological adaptation under sustained nitrate stress. Harvested biomass was subsequently valorized into biochar and bioethanol, with TCLP tests confirming minimal leaching risk. By integrating performance optimization, stress-response analysis, and biomass conversion, this work advances vetiver phytotechnology toward scalable, design-oriented nitrogen removal within a circular treatment framework.