This article presents a soft crawling robot prototype with a simple architecture inspired by inchworms. The robot functionally integrates the torso (body) and feet in a monolithic curved structure that only needs a single shape memory alloy coil and differential friction to actuate it. A novel foot configuration is proposed, which makes the two feet, with an anti-symmetrical friction layout, can be alternately anchored, to match the contraction–recovery sequence of the body adaptively. Based on the antagonistic configuration between the shape memory alloy actuator and the elastic body, a vertically auxiliary spring was adopted to enhance the interaction mechanism. Force and kinematic analysis was undertaken, focusing on the parametric design of the special foot configuration. A miniature robot prototype was then 3D-printed (54 mm in length and 9.77 g in weight), using tailored thermoplastic polyurethane elastomer as the body material. A series of experimental tests and evaluations were carried out to assess its performance under different conditions. The results demonstrated that under appropriate actuation conditions, the compact robot prototype could accomplish a relative speed of 0.024 BL/s (with a stride length equivalent to 27% of its body length) and bear a load over five times to its own weight.
The replication of jumping motions observed in small organisms poses a significant challenge due to size‐related effects. Shape memory alloys (SMAs) exhibit a superior work‐to‐weight ratio, making them suitable for jumping actuators. However, the SMAs advantages are hindered by the limitations imposed by their single actuator configuration and slow response speed. This study proposes a novel design approach for an insect‐scale shape memory alloy jumper (net‐shell) using 4D printing technology and the bistable power amplification mechanism. The energy variations of the SMA net‐shell under different states and loads are qualitatively elucidated through a spring‐mass model. To optimize the performance of the SMA net‐shell, a non‐contact photo‐driven technique is employed to induce its shape transition. Experimental investigations explore the deformation response, energy release of the net‐shell, and the relationship between the light power density. The results demonstrate that the SMA net‐shell exhibits remarkable jumping capabilities, achieving a jump height of 60 body lengths and takeoff speeds of up to 300 body lengths per second. Furthermore, two illustrative cases highlight the potential of net‐shells for applications in unstructured terrains. This research contributes to miniaturized jumping mechanisms by providing a new design approach integrating smart materials and advanced structures.
The percussion-based method has become a hot spot for bolt looseness monitoring due to its advantages of non-contact sensing, portability, and low cost. However, the features of bolt looseness in percussion methods lack phase information. In this paper, a percussion method based on the all-pole group delay function in the phase domain is proposed for the first time, and the bolt looseness is determined by a convolutional neural network. Under the four signal-to-noise ratio levels (0, 2, 4 and 6 dB), the accuracy of the proposed method is 90.25%, 92.75%, 93.5% and 94%. The experiment proves the percussion audio signal of the structural point away from the bolt can reflect the looseness of the bolt. The phase feature can represent the information of bolt looseness and has fast training speed and high recognition accuracy, which is suitable for detecting bolt looseness torque.
3 April 2022 in International Journal of Smart and Nano Materials
Leveraging advances in shape memory alloys (SMAs) and flexible thermoelectric devices (f-TEDs), this paper presents a structural and functional integrity composite sheet to address the inefficient and bulky activation of 2-D SMAs. A series of experimental tests were performed to reveal the generation, change, and transfer mechanisms of different types of electrically-induced heat in the f-TED, as well as the temperature-induced SMA phase transformation behaviors. The results show that the composite sheet exhibited good bidirectional thermal management capacity. The austenite deformation can be completed within 10s at an operating current of 2 A. The cooling recovery, in particular, performs much better than in conventional modes (the temperature declines exponentially with time). Finally, through two functional prototypes, a light switch and a flexible gripper, the application potential of the proposed composite was further experimentally demonstrated. Graphical Abstract