The researchers attract nanofluids due to their improved thermal and physical properties compared to the base fluid. The colloidal mixture of nanometre-sized particles with conventional fluid is known as nanofluids. Compared with single nanofluids, hybrid nanofluids show better enhancement in thermophysical properties. Combining nanoparticles into the host fluid is called a hybrid nanofluid. The preparation of nanofluid needs more importance. However, the physiochemical properties of the nanofluid mainly depend on the stability of the nanofluid. The article aims to provide detailed information about preparing different types of single and hybrid nanofluids dispersed in various base fluids, preparation techniques, stabilization processes, applications and challenges. Different types of surfactants and characterization methods are suggested to improve the stability of the prepared solution. It was observed that all types of nanoparticles and hybrid nanoparticles could be synthesized with different base fluids with the help of the sonication process, particle-to-surfactant ratio, magnetic stirrer and many more. The two-step method is mostly preferred by the researchers compared to the single-step method to prepare the nanofluid. Application of single and hybrid nanofluids has been highlighted in different areas; few challenges have also been identified and must be checked before implementation in the industry.
26 June 2021 in Journal of Thermal Analysis and Calorimetry
Nanofluids, which are stable suspension of nanoparticles in a carrier liquid, have gained traction in the past two decades for multiple scientific traits and a wide range of industrial features; one of them pivots around their improved physical properties and superior heat transfer capabilities over pure fluid. Viscosity plays a vital role in fluid flow and heat transfer characteristics of a nanofluid, as it is linked to the pumping power of fluid. The presence of the particles in the surfacted host liquids alters the viscosity of the medium and in nanofluid, and hence nanofluid rheology needs to be characterized to gauge their suitability in thermal transport applications. The rheological behavior of Al2O3 and TiO2–water nanofluids, stabilized by two different surfactants, is measured at different concentrations (0.1–2.0%) and temperatures (293–333 K). Transmission electron microscopy and dynamic light scattering measurement are executed to describe particle morphology and size distribution, respectively, while zeta potential and UV-visible spectroscopy have been employed to identify the stability of the nanofluids. The result shows that viscosity of the prepared suspension diminishes with increment in temperature and increases with enhancement in concentration. Nanofluid also appears as a non-Newtonian fluid with a shear rate between 12 and 232s−1 as they exhibit shear thickening behavior.
3 October 2022 in Particulate Science and Technology
The experimental and Molecular Dynamics (MD) simulation studies of nanofluids have substantially gained traction among many researchers in recent years as both studies complement each other. The main aim of this work is to investigate the stability, thermal conductivity (TC) and rheological behavior of copper oxide (CuO) based nanofluids at different particle concentrations (0.1–2.0%) and temperatures (20–60 °C) with the use of experimental and atomistic study. Nanofluid appears as a non-Newtonian fluid with a shear rate between 12 and 232 s−1 and they exhibit shear thickening behavior. MD study has confirmed the presence of nanolayer and enhanced self-diffusion coefficient of water which have been attributed to the viscosity and TC enhancement of the nanofluid. The maximum enhancement of TC is found to be 7% for CuO-SDS nanofluid over the base fluid at the highest concentration and temperature. The percentage of TC enhancement increases with temperature and concentration. MD study has also confirmed the same with a maximum error of 11% at the lowest temperature. Viscosity ratio of nanofluid increases with temperature and concentration. The same has been investigated using Green-Kubo formalism via MD and observed a maximum error of 8% at the lowest temperature.
In this present work heat transfer enhancement, pressure drop and friction factor of water, Fe2O3, and ZnFe2O4 water based hybrid nanofluid have been investigated numerically (ANSYS FLUENT 15.0). Nanofluids and hybrid nanofluids containing Fe2O3 and ZnFe2O4 nanoparticles in water at different particle concentration (φ = 0.1 to 2.0%) have been considered as the heat transfer medium. Flow through the circular tube under constant heat flux is assumed to be laminar at different Reynolds number (1275,1500,1875 and 2200). The physical properties of normal and hybrid nanofluids are assumed to be temperature dependent. Our numerical results are analyzed with experimental data of Gupta et al. [1]. Result shows that properties of hybrid nanofluids are larger than normal nanofluid and base fluid. It is noticed that values of heat transfer coefficient (HTC), Nusselt number (Nu) and pressure drop increases as Reynolds number (Re) and φ increased, for all working fluids. At φ = 2% and Re = 2200, HTC enhancement of 42.09% and 34.07% was identified for ZnFe2O4 hybrid nanofluid as compare to water and Fe2O3 nanofluids.