Although numerous W–Sn–Pb–Zn polymetallic deposits are located in southern Hunan, and In-bearing deposits are related to W–Sn–Pb–Zn polymetallic deposits, Indium mineralization in southern Hunan is poorly studied. In order to investigate the In mineralization of the Xianghualing orefield, which is a typical orefield in southern Hunan, ore bulk chemistry, microscopic observation, and electron-probe microanalysis of vein-type (type-I) and porphyry-type (type-II) Sn–Pb–Zn orebodies were studied. The In contents of the type-I orebodies varies from 0.79 to 1680 ppm (avg. 217 ppm, n = 29), and that of the type-II orebodies varies from 10 to 150 ppm (avg. 64 ppm, n = 10). Although chalcopyrite and stannite contain trace amounts of In, sphalerite is the most important In-rich mineral in the orefield. Sphalerite in type-I orebodies contains from <0.02 to 21.96 wt % In, and in type-II orebodies contains from <0.02 to 0.39 wt % In. Indium-rich chemical-zoned sphalerite contains 7 to 8 wt % In in its core and up to 21.96 wt % In in its rim. This sphalerite may be the highest In-bearing variety in Southern China. The Cd contents of the In-rich sphalerite ranges from 0.35 to 0.45 wt %, which places it in the the “Indium window” of the Cu–In–S phases. The geological and structural features of the Xianghualing orefield indicate that the In mineralization of the two types of In-bearing Sn–Pb–Zn orebodies is related to the volatile-rich, In-rich, A-type granites, and is controlled by the normal faults of magmatic-diapiric activity extensional features.

The Dongguashan copper (gold) deposit in Anhui Province is one of the largest copper (gold) deposits in the Tongling ore district, which is the most important region in the Middle–Lower Yangtze River Metallogenic Belt, Eastern China. Stratiform and lamellar orebodies are the major deposit types. Pyrite and pyrrhotite from the stratiform deposit type (Py I, Po I) and lamellar deposit type (Py II, Po II) are investigated using Electron-probe Microanalyses (EPMA) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). Py I, Py II, Po I and Po II have high contents of Cu, Co, Au and Se, low contents of As, Pb and Zn, with Co/Ni ratios of 0.50−48.00, 4.00−45.00, 1.55−14.45 and 1.02−1.36, respectively, most of which are greater than 1 and vary widely; these characteristics are consistent with those of pyrite with a magmatic–hydrothermal origin. The higher Au/Ag and Fe/(S + As) ratios of pyrite and crystallization temperatures (286–387 °C) of hexagonal pyrrhotite indicate that the mineralization occurrs in environments with medium- to high-temperatures, high sulfur fugacity and medium-shallow depths. Therefore, we suggest that the Dongguashan copper (gold) deposit is a stratabound skarn-type ore deposit associated with magma intrusion activity during the Yanshanian Period.

The Huanggangliang deposit is a super-large Sn-Fe deposit in the Huanggangliang–Ganzhuermiao metallogenic belt in the southern section of the Great Hinggan Range. The Sn-Fe deposits mainly occur in the skarn contact zone and were formed via the interaction of biotite-bearing alkali feldspar granite with limestone strata of the Permian Dashizhai and Zhesi Formations. Based on the intersecting relations among the ore-bearing veins and the different types of mineral assemblages within these veins, the Sn-Fe mineralization could be divided into two periods and four stages: the skarn period, which includes the garnet–diopside–magnetite (T1) stage (stage 1) and epidote–idocrase–cassiterite–magnetite (T2) stage (stage 2); and the quartz–magnetite period, which can be divided into the quartz–cassiterite–magnetite (T3) stage (stage 3) and quartz–magnetite (T4) stage (stage 4). In this paper, we discuss the genesis of magnetite, controlling factors for magnetite compositions, and type of ore genesis based on petrographic studies and LA-ICP-MS analyses of trace elements in these four types of magnetite from the Huanggangliang Sn-Fe deposit. The results demonstrate that the four types of magnetite are generally depleted in Ti (0.002–3.030 wt %), Al (0.008–1.731 wt %), and Zr (<1.610 ppm). In addition, the low Ni and Cr contents and relatively high and stable Fe contents in the four types of magnetite are indicative of hydrothermal genetic features. Compositions of the ore fluids and host rocks, formation of coexisting minerals, and other physical and chemical parameters (such as fO₂) may have influenced the variable magnetite geochemistry in the different Huanggangliang ore types, with fluid compositions and fO₂ probably playing the most important roles. The geological, petrographic, and geochemical characteristics of magnetite of the Huanggangliang Sn-Fe deposit lead us to conclude that the deposit is a skarn-type Sn-Fe deposit associated with Yanshanian medium-acidic magmatic activities.

The Xiajinbao gold deposit is located at the northern margin of the North China Craton. Hydrothermal pyrites belonging to three stages were identified: Py1; Py2; and Py3. Geochemical study of these pyrites was conducted using electron probe microanalysis and laser ablation inductively coupled plasma mass spectrometry to investigate the distributions of minor and trace elements, constrain pyrite genesis, and to obtain an improved understanding of the ore-forming processes. Py1 and Py2 contain high concentrations of Au and are interpreted to have been deposited from fluids from a dominantly magmatic source. Py3 grains have the lowest Co/Ni ratios. All generations of pyrite were deposited by mixing of meteoric waters with magmatic-hydrothermal fluids. Boiling of early ore-forming fluids led to the precipitation of Py1 and gold. Decreasing fO₂ in the ore-forming system resulted in the formation of Py2 and gold. Fluid mixing was the dominant controlling factor for the precipitation of Py3 together with small amounts of gold.

The crystal structure of bornite with ideal formula Cu₅FeS₄ from the Saishitang skarn copper deposit in Qinghai Province, along with bornite from the Yushui spouting hydrothermal copper deposit in Guangdong Province and the Bofang sandstone copper deposit in Hunan Province, has been refined by single-crystal X-ray diffraction with R1 = 0.0259–0.0483 (I > 2σ) and 0.0338–0.1067 for 2732 to 3273 unique reflections. As represented by the Saishitang sample, it is orthorhombic with a Pbca space group and unit cell parameters a = 10.97016(18) Å, b = 21.8803(4) Å, c = 10.9637(2) Å, V = 2631.61(8) Å3 and Z = 16. The structure is composed of sulfur layers parallel to the (0 1 0) lattice plane with interstices occupied by metal atoms. The Fe atoms occupy two tetrahedral sites with full occupancy, but the Cu atoms are all partially distributed over 20 paired sites, split from 10 sites with a distance ranging from 0.24 Å to 0.54 Å. The Fe-S tetrahedra are not split with Fe-S lengths from 2.2609 Å to 2.3286 Å (average 2.2997 Å). The Cu-S lengths in pyramidal triangles are from 2.218 Å to 2.397 Å (average 2.288 Å), whereas the Cu-S tetrahedra are strongly distorted, with great variations in Cu-S lengths from 2.224 Å to 2.604 Å (average 2.391 Å). The orthorhombic unit cell is stacked from 16 1a-type (5.5 Å) cubes; each cube has one tetrahedrally-coordinated Fe atom, five split from 3- to 4-coordinated Cu atoms, and two vacancies, i.e., 5Cu_III–IV+Fe_IV+2[]+4S. The phenomenon of site-splitting of Cu atoms may provide for a more accurate structure of bornite, allowing for a better understanding of its magnetic properties and ore-formation conditions.