Microstructures, elemental partition behavior, phase stabilities and mechanical properties of Nb- and W-containing Co-V-Ti-based superalloys were investigated. Elemental partition coefficients (K_X = C_γ’/C_γ) of Nb and W in Co-V-Ti-based superalloys are 2.07 and 1.10, respectively. The γ’ solvus temperatures are determined as 1023 °C, 1055 °C and 1035 °C in Co-12V-4Ti, Co-10V-4Ti-2Nb and Co-10V-4Ti-2W alloys, which are higher than those of Co-9Al-9W alloy (1000 °C). The mass densities of quaternary Co-10V-4Ti-2Nb and Co-10V-4Ti-2W alloys are about 8.31 and 8.50 g·cm⁻³, respectively, which are 15% lower than Co-Al-W-based superalloys (9.8 g·cm⁻³). All examined alloys exhibit an anomalous positive dependence on temperature rising from 600 to 750 °C. Strengths of all examined alloys are higher than those of MarM509 (traditional Cobalt-based superalloy) and Co-9Al-9W at all temperatures that we investigated. The maximum flow stress of Co-V-Ti-Nb alloy is about 638 MPa at 750 °C while that of Co-V-Ti-W alloy is about 588 MPa at 700 °C.

The phase equilibria of the Co-Ti-Ta ternary system at 1000 °C, 1100 °C, and 1200 °C were experimentally investigated using an electron probe microanalyzer and X-ray diffraction. Experimental results show that: (1) No ternary compound exists in the studied isothermal sections; (2) the β(Ti) and β(Ta) phases form the continuous solid solution β(Ti,Ta) in the Ti-Ta side; (3) the solubility of Ta in the (αCo) is less than 5%; (4) the phases of Co₂Ti(h) and γ-Co₂Ta, Co₂Ti(c) and β-Co₂Ta form the continuous solid solutions Co₂(Ta,Ti)(h) and Co₂(Ta,Ti)(c), respectively.