This study describes the synthesis of nitrogen-containing carbon (N-C) and an approach to apply the N-C material as a surface encapsulant of LiMn₂O₄ (LMO) cathode material. The N heteroatoms in the N-C material improve the electrochemical performance of LMO. A low-cost wet coating method was used to prepare N-C@LMO particles. The N-C@LMO was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), high-resolution Raman spectroscopy (HR-Raman), field emission scanning electron microscopy (FE-SEM) and field emission scanning transmission electron microscopy (FE-TEM) with elemental mapping. Furthermore, the prepared samples were electrochemically studied using the AC electrochemical impedance spectroscopy (EIS) and the electrochemical cycler. XPS suggested that the N-C coating greatly reduced the dissolution of Mn and EIS showed that the coating greatly suppressed the charge transfer resistance, even after long-term cycling. The control of Mn dissolution and inner resistance allowed faster Li-ion transport between the two electrodes resulting in improved discharge capacity and cycling stability.

The development of gel polymer electrolytes (GPEs) for lithium-ion batteries (LIBs) has paved the way to powering futuristic technological applications such as hybrid electric vehicles and portable electronic devices. Despite their multiple advantages, non-aqueous liquid electrolytes (LEs) possess certain drawbacks, such as plasticizers with flammable ethers and esters, electrochemical instability, and fluctuations in the active voltage scale, which limit the safety and working span of the batteries. However, these shortcomings can be rectified using GPEs, which result in the enhancement of functional properties such as thermal, chemical, and mechanical stability; electrolyte uptake; and ionic conductivity. Thus, we report on PVDF-HFP/PMMA/PVAc-based GPEs comprising poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) and poly(methyl methacrylate) (PMMA) host polymers and poly(vinyl acetate) (PVAc) as a guest polymer. A physicochemical characterization of the polymer membrane with GPE was conducted, and the electrochemical performance of the NCM811/Li half-cell with GPE was evaluated. The GPE exhibited an ionic conductivity of 4.24 × 10⁻⁴ S cm⁻¹, and the NCM811/Li half-cell with GPE delivered an initial specific discharge capacity of 204 mAh g⁻¹ at a current rate of 0.1 C. The cells exhibited excellent cyclic performance with 88% capacity retention after 50 cycles. Thus, this study presents a promising strategy for maintaining capacity retention, safety, and stable cyclic performance in rechargeable LIBs.

Schematic illustrations of the postulated formation process of surface protective layers when VC was added to the electrolyte.

In the present work, we have synthesized zero-dimensional (0D) and three-dimensional (3D) iron oxide (α-Fe ₂ O ₃ ) sub-micron particles using a one-pot hydrothermal approach.