The precise tracking control problem for n-link flexible-joint (FJ) robotic systems is addressed. A new adaptive fuzzy command filtered control strategy is presented, where fuzzy logic systems (FLSs) are utilized to approximate the unknown nonlinearities of FJ robot systems. Compared with existing backstepping-based methods, the proposed scheme can not only overcome the so-called “explosion of complexity” problem, but also reduce filter errors because of the introducing of an error compensation mechanism. Moreover, regardless of the number of fuzzy rules, only one parameter is required to be adjusted on-line, which reduces significantly the computational cost. The proposed scheme can guarantee that all the signals in the closed-loop system are semi-globally uniformly ultimately bounded, and the tracking error eventually converges to a small neighborhood around zero. The simulation results of a two-link robot system confirm our theoretical analysis and a comparison study demonstrates the advantages of the design method in comparison with existing results, such as the backstepping method and the dynamic surface control (DSC) method.
3 January 2019 in IEEE/CAA Journal of Automatica Sinica
In this paper, we propose an adaptive fuzzy dynamic surface control ( DSC ) scheme for single-link flexible-joint robotic systems with input saturation. A smooth function is utilized with the mean-value theorem to deal with the difficulties associated with input saturation. An adaptive DSC design with an auxiliary first-order filter is used to solve the “ explosion of complexity ” problem. It is proved that all the signals in the closed-loop system are semi-globally uniformly ultimately bounded, and the tracking error eventually converges to a small neighborhood around zero. The main advantage of the proposed method is that only one adaptation parameter needs to be updated, which reduces the computational burden significantly. Simulation results demonstrate the feasibility of the proposed scheme and the comparison results show that the improved DSC method can reduce the computational burden by almost two thirds in comparison with the standard DSC method.
21 October 2020 in IEEE Transactions on Fuzzy Systems
This paper presents a fuzzy finite-time command filtering output feedback control method for a class of nonlinear systems. A fast convergent output feedback control algorithm based on backstepping finite-time command filtering is developed. Fuzzy logic system (FLS) is used to estimate uncertain functions in nonlinear systems. A fuzzy state observer is designed to measure the unknown state. The developed finite-time command filtering feedback control method overcomes well the computational complexity problem due to the calculation of the derivatives of virtual control signals. A compensation mechanism is also introduced to compensate for the error caused by the filter. The proposed method ensures not only that all signals in the closed loop system are finite-time bound, but also that the tracking error converges to a small neighborhood around the origin. The effectiveness of the proposed method is demonstrated in the simulation results.
This paper solves the finite-time tracking problem of a class of high-order nonlinear systems under event-triggered input. Unlike existing event-triggered frameworks based on signal transmission channels from the sensor to the controller or from the controller to the actuator, these developed trigger mechanisms only compare the difference between the signal to be transmitted and the holding signal. By introducing internal trigger conditions and external trigger conditions, a novel error-to-actuator based event-triggered framework is proposed. It further considers the response of the trigger mechanism to system control performance such that the tracking performance of the system can be guaranteed while reducing the number of signal transmissions. In addition, filter-based techniques (such as the dynamic surface control method), for the first time, are utilised to eliminate some strong constraints that exist in the literature for most high-order nonlinear systems. The effectiveness of the proposed approach is evaluated on simulation examples including comparative studies and a practical example.