Energy efficiency is the key requirement to maximize sensor node lifetime. Sensor nodes are typically powered by a battery source that has finite lifetime. Most Internet of Thing (IoT) applications require sensor nodes to operate reliably for an extended period of time. To design an autonomous sensor node, it is important to model its energy consumption for different tasks. Each task consumes a power consumption amount for a period of time. To optimize the consumed energy of the sensor node and have long communication range, Low Power Wide Area Network technology is considered. This paper describes an energy consumption model based on LoRa and LoRaWAN, which allows estimating the consumed power of each sensor node element. The definition of the different node units is first introduced. Then, a full energy model for communicating sensors is proposed. This model can be used to compare different LoRaWAN modes to find the best sensor node design to achieve its energy autonomy.

LPWAN technologies such as LoRa are widely used for the deployment of IoT applications, in particular for use cases requiring wide coverage and low energy consumption. To minimize the maintenance cost, which can become significant when the number of sensors deployed is large, it is essential to optimize the lifetime of nodes, which remains an important research topic. For this reason, it is necessary that it is based on a fine energy consumption model. Unfortunately, many existing consumption models do not take into account the specifications of the LoRaWAN protocol. In this paper, a refined energy consumption model based on in-situ measurements is provided for a LoRaWAN node. This improved model takes into account the number of nodes in the network, the collision probability that depends on the density of sensors, and the number of retransmissions. Results show the influence of the number of nodes in a LoRaWAN network on the energy consumption of a node and demonstrate that the number of sensors that can be integrated into a LoRaWAN network is limited due to the probability of collision.

One of the key issues with the Internet of Things (IoT) is energy consumption. This type of network is mainly composed of connected objects supplied by an unreliable power source. Wi-Fi HaLow is one of the telecommunication technologies that proposes to connect IoT objects by providing energy optimization mechanisms. It allows the integration of a full IP stack and the implementation of recent security mechanisms. In this article, we introduce power consumption measurements performed on the first device available on the market. In our study, we integrate the current consumed by the power amplifier in transmission phase, and we qualify the power-saving mechanisms. We then propose an analytical model to determine the energy consumed by a sensor node depending on the carried payload. Finally, we validate the use of this technology in IoT application in terms of energy consumption.

In environment sound classification, log Mel band energies (MBEs) are considered as the most successful and commonly used features for classification. The underlying algorithm, fast Fourier transform (FFT), is valid under certain restrictions. In this study, we address these limitations of Fourier transform and propose a new method to extract log Mel band energies using amplitude modulation and frequency modulation. We present a comparative study between traditionally used log Mel band energy features extracted by Fourier transform and log Mel band energy features extracted by our new approach. This approach is based on extracting log Mel band energies from estimation of instantaneous frequency (IF) and instantaneous amplitude (IA), which are used to construct a spectrogram. The estimation of IA and IF is made by associating empirical mode decomposition (EMD) with the Teager–Kaiser energy operator (TKEO) and the discrete energy separation algorithm. Later, Mel filter bank is applied to the estimated spectrogram to generate EMD-TKEO-based MBEs, or simply, EMD-MBEs. In addition, we employ the EMD method to remove signal trends from the original signal and generate another type of MBE, called S-MBEs, using FFT and a Mel filter bank. Four different datasets were utilised and convolutional neural networks (CNN) were trained using features extracted from Fourier transform-based MBEs (FFT-MBEs), EMD-MBEs, and S-MBEs. In addition, CNNs were trained with an aggregation of all three feature extraction techniques and a combination of FFT-MBEs and EMD-MBEs. Individually, FFT-MBEs achieved higher accuracy compared to EMD-MBEs and S-MBEs. In general, the system trained with the combination of all three features performed slightly better compared to the system trained with the three features separately.