1. Human drivers often exhibit anticipatory behaviour, adjusting their actions based on the expected movements of surrounding vehicles (Chen et al. 2023; Treiber, Kesting, and Helbing 2006). Others...
A good coordination of traffic signals can reduce waiting times, the number of stops and accelerations, and thus increase travel speeds, which can lead to a reduction in fuel consumption and air pollutant emissions. To investigate the effects of traffic signal coordination on traffic and emission parameters, simulation studies are advantageous over time-consuming field tests to quantify and evaluate quickly, safely and cost-effectively a large number of different input variables, such as intersection distances, traffic volumes and different signal control configurations. This paper describes the findings of an extensive simulation study in which a microscopic traffic flow simulation model was coupled with an emission model. Through the simulation of a range of scenarios, the model is used to investigate the influence of inter alia traffic volume, signal coordination schemes and signal parameters on carbon dioxide, nitrogen oxides and particulate matter emissions along an arterial road equipped with a series of traffic lights. Results showed that shorter distances between the signalized intersections led to about 20% higher emission values. Furthermore, different cycle times and their effects on emissions were investigated, whereby higher cycle times led to lower values of about 14% less emissions.
Legal requirements for minimum distances between vehicles are often not met for short periods of time, especially when changing lanes on multi-lane roads. These situations are typically non-hazardous, as human drivers anticipate surrounding traffic, allowing for shorter headways and improved traffic flow. Automated vehicles (AVs), however, are typically designed to maintain strict headway limits, potentially reducing traffic efficiency. Therefore, legal questions arise as to whether mandatory gap and headway limits for AVs may be violated during periods of non-compliance. While traffic flow simulation is a common method for analyzing AV impacts, previous studies have typically modeled AV behavior using driver models originally designed to replicate human driving. These models are not well suited for representing clearly defined, structured non-compliant maneuvers, as they cannot simulate intentional, rule-deviating strategies. This paper addresses this gap by introducing a concept for AV non-compliant behavior and implementing it as a module within a pre-existing AV driver model. Simulations were conducted on a three-lane highway with an on-ramp under varying traffic volumes and AV penetration rates. The results showed that, with an AV-penetration rate of more than 25%, road capacity at highway entrances could be increased and travel times reduced by over 20%, provided that AVs were allowed to merge with a legal gap of 0.9 s and a minimum non-compliant gap of 0.6 s lasting up to 3 s. This suggests that performance gains are achievable under adjusted legal requirements. In addition, the proposed framework can serve as a foundation for further development of AV driver models aiming at improving traffic efficiency while maintaining regulatory compliance.