This communication presents new designs of dual-circularly polarized (CP) planar aperture antenna and array for 60 GHz applications. First, a four-port planar aperture antenna with its feeding network is developed that exhibits wide impedance bandwidth, dual-CP radiation as well as high gain. Then, based on the proposed antenna, a new scheme of building a dual-CP array is proposed. With this new scheme that combines the power splitting network and series feeding method, four sequentially fed antenna elements are successfully combined to form a CP radiation array. The experimental results show that the -10 dB impedance bandwidths of the antenna and the array are more than 18.2% (55-66 GHz). While the 3 dB axial ratio bandwidths are from 54.2 to 64.3 GHz (17.2%) for the antenna and from 54.8 to 65 GHz (17%) for the array. The maximum gains achieved are 13.7 and 17.85 dBic for the antenna and array, respectively.

A wideband highly isolated MIMO patch antenna with an artificial magnetic conductor (AMC) ground plane is proposed in this letter. The antenna, which is rotationally symmetrical, is constructed by V-shaped patches coupled-fed by a bowtie dipole. The bowtie dipole and the V-shaped parasitic patches produce two resonant modes that are coupled together. Therefore, a wide impedance bandwidth is obtained. Thanks to the orthogonal feeding and the rotational symmetrical geometry, the antenna exhibits high port isolation as well as symmetrical radiation patterns with a compact size of 40${\times}$40${\times}$1.524 mm3. By placing an artificial magnetic conductor (AMC) ground plane with a distance of 10.5 mm below the radiating element, the antenna can achieve a unidirectional high gain with a lower height of the profile compared to that with PEC ground. Measured results show the antenna has an impedance bandwidth of 31.0% (3.0-4.1 GHz) with port isolation as low as -25 dB. The peak gain can reach 7.1 dBi with stable and symmetrical radiation patterns.

Fresnel zone plate (FZP) lens antenna, consisting of a set of alternative transparent and opaque concentric rings arranged on curvilinear or flat surfaces, have been widely used in various fields for sensing and communications. Nevertheless, the state-of-art FZP lens antennas are limited to a single band due to the frequency-dependent feature, which hinders their use in multi-band applications. In this work, a shared aperture dual-band FZP metalens antenna is proposed by merging two single-band FZP metalens antenna operating at distinct frequency bands seamlessly into one. Instead of using conventional metallic conductors, double-screen metagrids are devised in this work to form the concentric rings. Because the metagrids show distinct transmission/reflection properties at different frequencies, the performance of one set of concentric rings operating at the one band will not be affected by the other operating at the different band. In addition, to compensate for the phase shift introduced by the metagrids, an additional dielectric ring layer is added atop the FZP taking advantage of additive manufacturing. Thus, the radiation performance of the dual-band FZP lens antenna is comparable to that of each single FZP metalens antenna. For proof-of-concept, an antenna prototype operating at the dual band, 75 and 120 GHz with a frequency ratio of 1.6, is fabricated using an integrated additively manufactured electronics (AME) technique. The measured peak gains of 20.3 and 21.9 dBi are achieved at 75 and 120 GHz, respectively.

This paper presents a new dual-band dual circularly polarized (CP) high gain patch antenna array for vehicle satellite communications. The array consists of 16 linearly polarized dual-band elements backed with a new frequency-selective-surface-integrated artificial magnetic conductor (FAMC) ground. The FAMC is located underneath the array, which not only acts as a reflector to increase the array boresight gain but also enables the array's dual CP radiation. The reflected electromagnetic (EM) waves by the FAMC retard either 90° or 270° with respect to the EM waves of the array directly radiated to the upper sphere at two frequency bands, leading to the dual-band dual CP radiation. This is totally different from many of the former counterparts which are based on either the perturbation on the stacked patch or external feeding network. Simulated and measured results show that the -10-dB impedance bandwidth is from 7.8 to more than 8.5-GHz for X-band and from 14 to 15.3-GHz for Ku-band. The 3-dB axial ratio is from 8.15 to 8.35-GHz for the lower band (right-hand CP) and from 14.2 to 14.8-GHz for the higher band (left-hand CP), respectively.

This article presents an aperture-shared dual-band large frequency-ratio high gain antenna for sub-6 GHz and millimeter-wave (mm-wave) bands applications. Initially, the partially reflective surface (PRS) of the Fabry–Pérot cavity (FPC) antenna operating at the sub-6 GHz band is realized by using single-layered periodic grid patches while the opaque region of the mm-wave bandwaveband Fresnel zone plate (FZP) lens antenna is implemented by using periodic double-screen dipoles. Then, the PRS and the FZP lens are hybridized together and upgraded into a kind of composite metasurface, which simultaneously functions as the PRS of the sub-6 GHz FPC antenna and the mm-wave bandwaveband FZP lens with little dual-band mutual interference. Thus, the FPC antenna and the FZP lens can share the same aperture with high aperture reuse efficiency. Because the principles are based on the FPC resonance and the collimating FZP lens, high gains are achieved at both bands without a feeding network. Meanwhile, a dual-band large frequency-ratio antenna is designed as the feed. A prototype working at 3 and 28 GHz bands is designed, fabricated, and measured to verify the idea.

This communication proposes a dual-band antenna hybridizing a folded reflectarray antenna (FRA) and a folded transmitarray antenna (FTA). First, a polarization-rotation transmitarray is designed based on a new Fabry–Perot (FP)-liked phasing element. Unlike its counterparts, this new FP-liked phasing element twists the polarization of electromagnetic (EM) waves and provides sufficient phase tuning range only in the operating band of FTA. In the meantime, in the band of FRA, the transmitarray acts as the polarizing grid, which reflects one polarization while allowing the orthogonally polarized one to pass without affecting its polarization and phase. Second, a polarization-rotation-ground-integrated (PRGI) reflectarray is designed. The reflectarray collimates the EM wave in the band of FRA and twists its polarization by 90°, forming the folded reflectarray. Meanwhile, it also twists the polarization of the EM wave in the band of FTA. By hybridizing the FTA and FRA sharing the same aperture, the proposed design achieves dual-band high-gain radiation. To the best of our knowledge, this is the first time that the FRA and FTA are combined to form a shared aperture antenna, which inherits the advantages of both FRA and FTA, such as high gain, low profile, and reduced blockage effect of the feed. An antenna prototype is fabricated and measured to verify the idea.