Electrical arc machining is the thermal energy-based unconventional machining process, which utilizes energy of arc to melt and vaporize workpiece material. Electrical arc machining has the capability to machine advanced materials such as metal matrix composites, superalloys, and conductive ceramics effectively. The process is considered to be efficient than most of the other unconventional machining processes in terms of the material removal rate. But it has got limitations because it results in a very poor surface finish. Tool wear rate, recast layer formation, surface and subsurface cracks, and geometrical inaccuracy are other limitations up to a certain extent. In this paper, the comprehensive review of research carried out so for in the area of electrical arc machining has been presented. The paper discusses the detailed experimental and theoretical studies done on electrical arc machining to elucidate the effects of various input control factors on different quality characteristics. The paper also contains modeling and optimization studies done so far in electrical arc machining and finally discusses the future research possibilities in the area.
11 November 2020 in Multiscale and Multidisciplinary Modeling, Experiments and Design
To shape advanced engineering materials, many unconventional machining processes have been developed. Electrical discharge machining is such an unconventional machining process which is very popular nowadays but it is limited by poor material removal efficiency. Electrical arc machining is another unconventional machining process which is quite similar to electrical discharge machining and is now gaining attention from research fraternity due to its high material removal efficiency. In the present research, an innovative unconventional machining process known as vibration-assisted electrical arc machining has been developed. The performance of vibration-assisted electrical arc machining has been evaluated during machining of Al–B4C metal matrix composite by considering peak current, flushing velocity of dielectric and tool vibrations as input control factors. The quality characteristics considered were material removal rate, tool wear rate, relative electrode wear rate and surface roughness. It has been observed that vibration-assisted electrical arc machining results in approximately 3000% more material removal rate as compared to conventional electrical discharge machining during machining of Al–B4C metal matrix composite. The effects of various input control factors on output parameters have also been discussed. Further modelling and optimization of the process parameters has also been done by artificial intelligence approach.
11 December 2019 in Australian Journal of Mechanical Engineering
Machining of present days superior engineering materials is still a challenging task before industries, as conventional machining processes have proven to be inefficient to process these materials. In order to meet challenges, numerous processes with innovative mechanism of material removal have come into existence. Electrical discharge machining (EDM) is one among many such processes that has got wide attention. However, EDM results in very poor material removal and requires very high specific energy as compared to conventional machining processes. Electrical arc machining (EAM) is a process, which is very similar to EDM but results in very high material removal rate (MRR). In the present research, an innovative process known as vibration-assisted electrical arc machining has been developed. The process has been used to machine aluminium-boron carbide metal matrix composite. Peak current, frequency of vibration and dielectric flushing velocity has been considered as input control factors to evaluate MRR and surface roughness (SR). An artificial intelligence (AI)-based approach has been applied for single objective optimisation for MRR and SR. The AI-based approach results in an improvement of approximately 230 and 50% in MRR and SR, respectively.