This paper provides an overview of the physical layer specification of Advanced Television Systems Committee (ATSC) 3.0, the next-generation digital terrestrial broadcasting standard. ATSC 3.0 does not have any backwards-compatibility constraint with existing ATSC standards, and it uses orthogonal frequency division multiplexing-based waveforms along with powerful low-density parity check (LDPC) forward error correction codes similar to existing state-of-the-art. However, it introduces many new technological features such as 2-D non-uniform constellations, improved and ultra-robust LDPC codes, power-based layered division multiplexing to efficiently provide mobile and fixed services in the same radio frequency (RF) channel, as well as a novel frequency pre-distortion multiple-input single-output antenna scheme. ATSC 3.0 also allows bonding of two RF channels to increase the service peak data rate and to exploit inter-RF channel frequency diversity, and to employ dual-polarized multiple-input multiple-output antenna system. Furthermore, ATSC 3.0 provides great flexibility in terms of configuration parameters (e.g., 12 coding rates, 6 modulation orders, 16 pilot patterns, 12 guard intervals, and 2 time interleavers), and also a very flexible data multiplexing scheme using time, frequency, and power dimensions. As a consequence, ATSC 3.0 not only improves the spectral efficiency and robustness well beyond the first generation ATSC broadcast television standard, but also it is positioned to become the reference terrestrial broadcasting technology worldwide due to its unprecedented performance and flexibility. Another key aspect of ATSC 3.0 is its extensible signaling, which will allow including new technologies in the future without disrupting ATSC 3.0 services. This paper provides an overview of the physical layer technologies of ATSC 3.0, covering the ATSC A/321 standard that describes the so-called bootstrap, which is the universal entry point to an ATSC 3.0 signal, and the ATSC A/322 standard that describes the physical layer downlink signals after the bootstrap. A summary comparison between ATSC 3.0 and DVB-T2 is also provided.

This paper provides a review of the second generation of terrestrial digital video broadcasting standard (DVB-T2). DVB-T2 is the evolution of DVB-T and, together with DVB-S2 and DVB-C2, inaugurated a new transition from the first-generation digital broadcasting systems, similar to the transition from analog-to-digital systems. In this paper, the most relevant features of DVB-T2 are explained in detail, along with their benefits and trade-offs. This paper also presents a comprehensive review of the laboratory and field trial results available so far. Especial emphasis is placed in the results of the measurements carried out to test the mobile reception and the novel technologies as multiple input single output and time frequency slicing.

In this paper, we summarize and expound upon the choices made for the bit-interleaved coded modulation (BICM) part of the next-generation terrestrial broadcast standard known as ATSC 3.0. The structure of the ATSC 3.0 BICM consists of a forward error correcting code, bit interleaver, and constellation mapper. In order to achieve high efficiency over a wide range of reception conditions and carrier-to-noise (C/N) ratio values, several notable new elements have been standardized. First, 24 original low-density parity check (LDPC) codes have been designed, with coding rates from 2/15 (0.13) up to 13/15 (0.87) for two code sizes: 16 200 bits and 64 800 bits. Two different LDPC structures have been adopted; one structure more suited to medium and high coding rates and another structure suited to very low coding rates. Second, in addition to quaternary phase shift keying, non-uniform constellations (NUCs) have been chosen for constellation sizes from 16QAM to 4096QAM to bridge the gap to the Shannon theoretical limit. Two different types of NUCs have been proposed: 1-D NUCs for 1024- and 4096-point constellations, and 2-D-NUCs for 16-, 64-, and 256-point constellations. 2-D-NUCs achieve a better performance than 1-D-NUCs but with a higher complexity since they cannot be separated into two independent I/Q components. NUCs have been optimized for each coding rate for the 64 800 bits LPDCs. The same constellations are used for 16 200 bits LDPCs, although they have been limited up to 256QAM. Finally, a bit interleaver, optimized for each NUC/coding rate combination, has been designed to maximize the performance. The result is a BICM that provides the largest operating range (more than 30 dB, with the most robust mode operating below -5 dB C/N) and the highest spectral efficiency compared to any digital terrestrial broadcast system today, outperforming the current state-of-the-art DVB-T2 standard BICM by as much as 1 dB in some cases. ATSC 3.0 will also provide a considerable increase in the maximum transmission capacity when using the high-order NUCs such as 1024QAM and 4096QAM, which will represent a major milestone for terrestrial broadcasting since the highest order constellation currently available is uniform 256QAM. This paper describes the coding, modulation, and bit interleaving modules of the BICM block of ATSC 3.0 and compares its performance with other DTT standards such as ATSC A/53 and DVB-T2.

The fifth generation (5G) of mobile radio technologies has been defined as a new delivery model where services are tailored to specific vertical industries. 5G supports three types of services with different and heterogeneous requirements, i.e. enhanced Mobile Broadband (eMBB), Ultra-Reliable Low-Latency Communications (URLLC) and massive Machine-Type Communications (mMTC). These services are directly related to exemplary verticals such as media, vehicular communications or the Industry 4.0. This work provides a detailed analysis and performance evaluation of 5G New Radio (NR) against a set of Key Performance Indicators (KPI), as defined in the International Mobile Telecommunications 2020 (IMT-2020) guidelines, and provides an overview about the fulfillment of their associated requirements. The objective of this work is to provide an independent evaluation, complementing the Third Generation Partnership Project (3GPP) contribution. From the original group of sixteen KPIs, eleven of them have been carefully selected, paying special attention to eMBB services. Results show that 5G NR achieves all considered requirements, therefore fulfilling the specific market’s needs for years to come.

This paper reviews the main technical solutions adopted by the next-generation mobile broadcasting standard DVB-NGH, the handheld evolution of the second-generation digital terrestrial TV standard DVB-T2. The main new technical elements introduced with respect to DVB-T2 are: layered video coding with multiple physical layer pipes, time-frequency slicing, full support of an IP transport layer with a dedicated protocol stack, header compression mechanisms for both IP and MPEG-2 TS packets, new low-density parity check coding rates for the data path (down to 1/5), nonuniform constellations for 64 Quadrature Amplitude Modulation (QAM) and 256QAM, 4-D rotated constellations for Quadrature Phase Shift Keying (QPSK), improved time interleaving in terms of zapping time, end-to-end latency and memory consumption, improved physical layer signaling in terms of robustness, capacity and overhead, a novel distributed multiple input-single output transmit diversity scheme for single-frequency networks (SFNs), and efficient provisioning of local content in SFNs. All these technological solutions, together with the high performance of DVB-T2, make DVB-NGH a real next-generation mobile multimedia broadcasting technology. In fact, DVB-NGH can be regarded the first third-generation broadcasting system because it allows for the possibility of using multiple input-multiple output antenna schemes to overcome the Shannon limit of single antenna wireless communications. Furthermore, DVB-NGH also allows the deployment of an optional satellite component forming a hybrid terrestrial-satellite network topology to improve the coverage in rural areas where the installation of terrestrial networks could be uneconomical.

3GPP LTE eMBMS release (Rel-) 14, also referred to as further evolved multimedia broadcast multicast service (FeMBMS) or enhanced TV (EnTV), is the first mobile broadband technology standard to incorporate a transmission mode designed to deliver terrestrial broadcast services from conventional high power high tower (HPHT) broadcast infrastructure. With respect to the physical layer, the main improvements in FeMBMS are the support of larger inter-site distance for single frequency networks (SFNs) and the ability to allocate 100% of a carrier's resources to the broadcast payload, with self-contained signaling in the downlink. From the system architecture perspective, a receive-only mode enables free-to-air (FTA) reception with no need for an uplink or SIM card, thus receiving content without user equipment registration with a network. These functionalities are only available in the LTE advanced pro specifications as 5G new radio (NR), standardized in 3GPP from Rel-15, has so far focused entirely on unicast. This paper outlines a physical layer design for NR-MBMS, a system derived, with minor modifications, from the 5G-NR specifications, and suitable for the transmission of linear TV and radio services in either single-cell or SFN operation. This paper evaluates the NR-MBMS proposition and compares it to LTE-based FeMBMS in terms of flexibility, performance, capacity, and coverage.