Acoustic emission monitoring is a useful technique to deal with detection and identification of damage in composite materials. Over the last few years, identification of damage through intelligent signal processing was particularly emphasized. Data-driven models are developed to predict the remaining useful lifetime. Finite elements modeling (FEM) was used to simulate AE signals due to fiber break and fiber/matrix debonding in a model carbon fiber composite and thereby better understand the AE signals and physical phenomena. This paper presents a computational analysis of AE waveforms resulting from fiber break and fiber/matrix debonding. The objective of this research was to compare the AE signals from a validated fiber break simulation to the AE signals obtained from fiber/matrix debonding and fiber break obtained in several media and to discuss the capability to detect and identify each source.
The present paper focuses on experiments and numerical simulation of the acoustic emission (AE) signals due to fiber break in a model composite. AE signals are related to wave effects due to the source, the propagation medium and the sensor. For quantitative AE analysis, it is very important to understand the effect of the piezoelectric sensors and propagation on the “primitive” AE signals. In this study, we investigate the influence of sensors, thickness, and position of the fiber by finite element simulations. This parametric study can allow an enlargement of the library for supervised classification of AE signals.
Acoustic emission (AE) is used for damage monitoring and health diagnosis of materials. Several experimental investigations have shown the aptitude of AE to identify signatures of damage mechanisms. Nevertheless, there is a lack of numerical modelling or simulation to understand the link between the source and the AE signals. Since the interpretation of data of AE measurements mainly relies on empirical correlation between the signal and the mechanical source, a detailed description of the effects of the different stages of the acquisition chain is still lacking. Moreover, the geometry of the specimen can strongly influence the propagation modes. In this study, we propose to model AE with the Finite Element Method, in order to investigate the effect of the type of damage, the geometry of the specimen and the piezoelectric sensor on the waves and on the AE parameters. After validating the model with an experimental pencil lead break, we perform a modal analysis on the numerical signals. This consists of identifying the excited modes for several sources using a 2D Fast Fourier Transform. The last part is devoted to the identification of pertinent descriptors with a perfect point contact sensor and with a resonant sensor.