S M Muslem Uddin

Dr. S M Muslem Uddin

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 April 2015 in International Journal of Electronics
Verified
Journal Article
Closed access
MAMd. Parvez Akter
Md. Parvez Akter
SUS M Muslem Uddin
S M Muslem Uddin
Saad MekhilefSaad Mekhilef
Saad Mekhilef
NTNadia Mei Lin Tan
Nadia Mei Lin Tan
HAHirofumi Akagi
Hirofumi Akagi
Model predictive control (MPC) is a powerful and emerging control algorithm in the field of power converters and energy conversion systems. This paper proposes a model predictive algorithm to control the power flow between the high-voltage and low-voltage DC buses of a bidirectional isolated full-bridge DC–DC converter. The predictive control algorithm utilises the discrete nature of the power converters and predicts the future nature of the system, which are compared with the references to calculate the cost function. The switching state that minimises the cost function is selected for firing the converter in the next sampling time period. The proposed MPC bidirectional DC–DC converter is simulated with MATLAB/Simulink and further verified with a 2.5 kW experimental configuration. Both the simulation and experimental results confirm that the proposed MPC algorithm of the DC–DC converter reduces reactive power by avoiding the phase shift between primary and secondary sides of the high-frequency transformer and allow power transfer with unity power factor. Finally, an efficiency comparison is performed between the MPC and dual-phase-shift-based pulse-width modulation controlled DC–DC converter which ensures the effectiveness of the MPC controller.

1 February 2015 in IET Power Electronics
Verified
Journal Article
Open access
PDF file
SUS M Muslem Uddin
S M Muslem Uddin
Saad MekhilefSaad Mekhilef
Saad Mekhilef
Marco RiveraMarco Rivera
Marco Rivera
This study proposes a robust and powerful finite control set‐model predictive control (MPC) algorithm to control the load current with lower total harmonic distortion and efficient reference tracking. In this control, the cost functions are determined for all the possible switching states of the converter and a switching state is selected corresponding to the minimum cost function for actuating the converter in the next sampling time period. To justify the performance of the proposed MPC scheme, a comprehensive study with the carrier‐based pulse‐width modulation, hysteresis current control and proposed minimum cost function‐based MPC of the three‐phase load current has been verified in MATLAB Simulink as well as the validation with dSPACE RTI1104 experimentation. This study validates the robustness of the proposed minimum cost function‐based MPC control with a RL‐load and three‐phase induction motor (IM) load. The simulation and experimental results justifies the proposed MPC algorithm with potential tracking of the RL‐load current corresponding to the reference current with lower harmonic contents as well as tracking of predictive torque and flux compared to the nominal torque and reference flux of IM, respectively.

24 June 2014 in Electric Power Components and Systems
Verified
Journal Article
Closed access
SUS M Muslem Uddin
S M Muslem Uddin
Saad MekhilefSaad Mekhilef
Saad Mekhilef
MMMarizan Mubin
Marizan Mubin
Marco RiveraMarco Rivera
Marco Rivera
Jose RodriguezJose Rodriguez
Jose Rodriguez
—Model predictive control has emerged as a powerful control tool in the field of power converter and drive's system. In this article, a weighting factor optimization for reducing the torque ripple of induction machine fed by an indirect matrix converter is introduced and presented. Therefore, an optimization method is adopted here to calculate the optimum weighting factor corresponding to minimum torque ripple. However, model predictive torque and flux control of the induction machine with conventionally selected weighting factor is being investigated in this article and is compared with the proposed optimum weighting factor based model predictive control algorithm to reduce the torque ripples. The proposed model predictive control scheme utilizes the discrete phenomena of power converter and predicts the future nature of the system variables. For the next sampling period, model predictive method selects the optimized switching state that minimizes a cost function based on optimized weighting factor to actuate the power converter. The introduced weighting factor optimization method in model predictive control algorithm is validated through simulations and shows potential control, tracking of variables with their respective references and consequently reduces the torque ripples corresponding to conventional weighting factor based predictive control method.

1 July 2020 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
GMGalina Mirzaeva
Galina Mirzaeva
DCDouglas Carter
Douglas Carter
SUS M Muslem Uddin
S M Muslem Uddin
PSPeter Stepien
Peter Stepien
Common-mode-voltage (CMV) is a well-known source of bearing currents and electromagnetic interference (EMI) in industrial applications. In underground mining environment, where impedance-earthed IT earthing system is typical, CMV is additionally associated with potentially undetectable fault currents, due to their diversion away from a protection circuit. This paper proposes a VSD solution that generates practically zero CMV and removes alternative paths for the fault currents. The VSD topology utilized in this paper is a standard 2-level Inverter with Active Front End. The paper develops a control strategy such that it eliminates CMV, minimizes EMI and optimizes harmonic distortion at the drive input and output. Experiments conducted in a representative laboratory environment, have confirmed the practical elimination of CMV and EMI, and effectiveness of the earth fault protection.

1 January 2015 in Journal of Electrical Engineering & Technology
Verified
Journal Article
Open access
SUS M Muslem Uddin
S M Muslem Uddin
Saad MekhilefSaad Mekhilef
Saad Mekhilef
Marco RiveraMarco Rivera
Marco Rivera
Jose RodriguezJose Rodriguez
Jose Rodriguez

1 June 2013
Verified
Conference Paper
Closed access
SUS M Muslem Uddin
S M Muslem Uddin
Saad MekhilefSaad Mekhilef
Saad Mekhilef
Marco RiveraMarco Rivera
Marco Rivera
Jose RodriguezJose Rodriguez
Jose Rodriguez
A torque and flux FCS-MPC (Finite Control Set Model Predictive Control) of an induction motor with unity power factor fed by an indirect matrix converter has been investigated and presented in this paper. The proposed control scheme utilizes the discrete nature of power converter and predicts the future behavior of the system variables. Also the method selects the switching state that minimizes a cost function to actuate the converter in the next sampling time. The proposed FCS-MPC algorithm is validated through simulations and shows potential control and tracking of variables with their respective references.