The radiative and nonradiative components of the threshold current in , -doped and undoped quantum-dot semiconductor lasers were studied between 20 and . The complex behavior can be explained by simply assuming that the radiative recombination and nonradiative Auger recombination rates are strongly modified by thermal redistribution of carriers between the dots. The large differences between the devices arise due to the trapped holes in the -doped devices. These both greatly increase Auger recombination involving hole excitation at low temperatures and decrease electron thermal escape due to their Coulombic attraction. The model explains the high values observed near room temperature.
1 August 2014 in Journal of Physics D: Applied Physics
From a systematic study of the threshold current density as a function of temperature and hydrostatic pressure, in conjunction with theoretical analysis of the gain and threshold carrier density, we have determined the wavelength dependence of the Auger recombination coefficients in InGaAsSb/GaSb quantum well lasers emitting in the 1.7–3.2 µm wavelength range. From hydrostatic pressure measurements, the non-radiative component of threshold currents for individual lasers was determined continuously as a function of wavelength. The results are analysed to determine the Auger coefficients quantitatively. This procedure involves calculating the threshold carrier density based on device properties, optical losses, and estimated Auger contribution to the total threshold current density. We observe a minimum in the Auger rate around 2.1 µm. A strong increase with decreasing mid-infrared wavelength (<2 µm) indicates the prominent role of intervalence Auger transitions to the split-off hole band (CHSH process). Above 2 µm, the increase with wavelength is approximately exponential due to CHCC or CHLH Auger recombination, limiting long wavelength operation. The observed dependence is consistent with that derived by analysing literature values of lasing thresholds for type-I InGaAsSb quantum well diodes. Over the wavelength range considered, the Auger coefficient varies from a minimum of 1 × 10−16cm 4 s−1 at 2.1 µm to ∼8 × 10−16cm4 s−1 at 3.2 µm.
The piezoelectric effect in polar semiconductor has seen increased interest in recent years because of the prospect of exploiting semiconducting behavior and piezoelectric response, i.e. generating electric fields in response to pressure, in novel optoelectronic devices with applications as pressure sensors and energy harvesting. In this paper we review the basic concepts and recent findings related to the novel concept of non-linear piezoelectricity, which can be exploited in composite nanostructured materials to increase the piezoelectric response compared to bulk materials. Applications to light emitting diodes and nanowires will also be discussed. We will show how the non-linear theory of piezoelectricity can in some cases lead to opposite predictions compared to the classic linear theory.