The limitation of a high-voltage lithium (Li) metal battery lies in the absence of a robust electrolyte that can endure oxidation loss at a high-voltage cathode and suppress the dendrite growth at a Li metal anode. The challenge becomes especially serious when the cathode voltage reaches 5 V and above. Here, we developed an additive-containing electrolyte that can concurrently stabilize the Li metal anode and the 5 V class LiNi0.5Mn1.5O4 (LNMO) cathode by introducing tris(pentafluorophenyl)borane (TPFPB) to the traditional ethylene carbonate/ethyl methyl carbonate (EC/EMC) electrolyte. The boron element and pentafluorobenzene in TPFPB induce preferential formation of a steady and smooth interfacial layer on both the Li and LNMO electrodes, subsequently preventing the decomposition of the electrolyte, impeding the pulverization of the cathode electrode, and retarding the growth of Li dendrites. Accordingly, we accomplish high average coulombic efficiency of >99.2% and superior capacity retention of 90% after 500 cycles at 0.5C with charge cut-off voltage of 4.95 V, which is one of the highest results for cycling among 5 V-class Li metal batteries with 90% capacity retention. This study provides essential technological implications for the electrolyte design for high-voltage Li–metal batteries.
The voltage-gated ion channels, also known as ionic transistors, play substantial roles in biological systems and ion-ion selective separation. However, implementing the ultrafast switchable capabilities and polarity switching of ionic transistors remains a challenge. Here, we report a nanofluidic ionic transistor based on carbon nanotubes, which exhibits an on/off ratio of 10 4 at operational gate voltage as low as 1 V. By controlling the morphology of carbon nanotubes, both unipolar and ambipolar ionic transistors are realized, and their on/off ratio can be further improved by introducing an Al 2 O 3 dielectric layer. Meanwhile, this ionic transistor enables the polarity switching between p-type and n-type by controlled surface properties of carbon nanotubes. The implementation of constructing ionic circuits based on ionic transistors is demonstrated, which enables the creation of NOT, NAND, and NOR logic gates. The ionic transistors are expected to have profound implications for low-energy consumption computing devices and brain-machine interfacing.
Stretchable electronics commonly assemble multiple material modules with varied bulk moduli and surface chemistry on one packaging substrate. Preventing the strain-induced delamination between the module and the substrate has been a critical challenge. Here we develop a packaging substrate that delivers mechanically stable module/substrate interfaces for a broad range of stiff and stretchable modules with varied surface chemistries. The key design of the substrate was to introduce module-specific stretchability and universal adhesiveness by regionally tuning the bulk molecular mobility and surface molecular polarity of a near-hermetic elastic polymer matrix. The packaging substrate can customize the deformation of different modules while avoiding delamination upon stretching up to 600%. Based on this substrate, we fabricated a fully stretchable bioelectronic device that can serve as a respiration sensor or an electric generator with an in vivo lifetime of 10 weeks. This substrate could be a versatile platform for device assembly.
Fully biodegradable packaging materials are demanded to resolve the issue of plastic pollution. However, the fresh food storage performance of biodegradable materials is generally much lower than that of plastics due to their high permeability, microbial friendliness, and limited stretchability and transparency. Here a biodegradable packaging material is reported with high fresh food storage performance based on an oil‐infused bacterial cellulose (OBC) porous film. The oil infusion significantly improved cellulose's food‐keeping performance by reducing its gas permeability, increasing its stretchability and transparency, and enabling the active release of green vapor‐phase preservative molecules, while maintaining its intrinsically high degradability. Strawberries stored in a container with the OBC lid at 23 °C after 5 days exhibited a moldy rate of 0%, in contrast to the 100% moldy rate of those stored by poly(ethylene). Enhanced storage performance is also obtained on tomatoes, pork, and shrimp. The OBC film is naturally degraded after being buried in wet soil at 30 °C for 9 days, identical to the degradation rate of bacterial cellulose. The liquid seal strategy broadly applies to different celluloses, providing a general option for developing cellulose‐based biodegradable packaging materials.