Field trials were carried out in the Sudan Savannah of Nigeria to assess the usefulness of CERES-Maize crop model as a decision support tool for optimizing maize production through manipulation of plant dates. The calibration experiments comprised of twenty maize varieties planted during the dry and rainy seasons of 2014 and 2015 at Bayero University Kano and Audu Bako College of Agriculture Danbatta. The trials for model evaluation were conducted in 16 different farmer fields across the Sudan (Bunkure and Garun - Mallam) and Northern Guinea (Tudun-Wada and Lere) Savannas using two of the calibrated varieties under 4 different sowing dates. The model accurately predicted grain yield, harvest index, and biomass of both varieties with low RMSE values (below 5% of mean), high d-index (above 0.8) and high r-square (above 0.9) for the calibration trials. The time series data (tops weight, stem and leaf dry weights) were also predicted with high accuracy (% RMSEn above 70%, d-index above 0.88). Similar results were also observed for the evaluation trials, where all variables were simulated with high accuracies. Estimation efficiencies (EF) values above 0.8 were observed for all the evaluation parameters. Seasonal and sensitivity analyses on Typic Plinthiustalfs and Plinthic Kanhaplustults in the Sudan and Northern Guinea Savannas were conducted. Results showed that planting extra early maize varieties in late July and early maize in mid-June leads to production of highest grain yields in the Sudan Savanna. In the Northern Guinea Savanna planting extra-early maize in mid-July and early maize in late July produced the highest grain yields. Delaying planting in both Agro-ecologies until mid-August leads to lower yields. Delaying planting to mid-August led to grain yield reduction of 39.2% for extra early maize and 74.4% for early maize in the Sudan Savanna. In the Northern Guinea Savanna however, delaying planting to mid-August resulted in yield reduction of 66.9% and 94.3% for extra-early and early maize respectively.

Most crop simulation models require the use of Genotype Specific Parameters (GSPs) which provide the Genotype component of G×E×M interactions. Estimation of GSPs is the most difficult aspect of most modelling exercises because it requires expensive and time-consuming field experiments. GSPs could also be estimated using multi-year and multi locational data from breeder evaluation experiments. This research was set up with the following objectives: i) to determine GSPs of 10 newly released maize varieties for the Nigerian Savannas using data from both calibration experiments and by using existing data from breeder varietal evaluation trials; ii) to compare the accuracy of the GSPs generated using experimental and breeder data; and iii) to evaluate CERES-Maize model to simulate grain and tissue nitrogen contents. For experimental evaluation, 8 different experiments were conducted during the rainy and dry seasons of 2016 across the Nigerian Savanna. Breeder evaluation data were also collected for 2 years and 7 locations. The calibrated GSPs were evaluated using data from a 4-year experiment conducted under varying nitrogen rates (0, 60 and 120kg N ha^-1). For the model calibration using experimental data, calculated model efficiency (EF) values ranged between 0.88–0.94 and coefficient of determination (d-index) between 0.93–0.98. Calibration of time-series data produced nRMSE below 7% while all prediction deviations were below 10% of the mean. For breeder experiments, EF (0.58–0.88) and d-index (0.56–0.86) ranges were lower. Prediction deviations were below 17% of the means for all measured variables. Model evaluation using both experimental and breeder trials resulted in good agreement (low RMSE, high EF and d-index values) between observed and simulated grain yields, and tissue and grain nitrogen contents. It is concluded that higher calibration accuracy of CERES-Maize model is achieved from detailed experiments. If unavailable, data from breeder experimental trials collected from many locations and planting dates can be used with lower but acceptable accuracy.

The Crop Environment Resource Synthesis (CERES)-Maize model in Decision Support System for Agricultural Technology Transfer (DSSAT) was calibrated and evaluated with experimental data for simulation of response of two intermediate-maturing maize varieties to different sowing dates in the Nigerian savannas. The calibration experiments involved 14 consecutive field trials conducted in the rainy and dry seasons in Bayero University Kano (BUK), Dambatta, and Zaria between 2014–2019. Two sets of field experiments were conducted simultaneously for model evaluation in Iburu in the southern Guinea savanna zone and Zaria in the northern Guinea savanna zone during 2015 and 2016 cropping seasons. The experiments for calibration had two maize (SAMMAZ-15 and SAMMAZ-16) varieties planted under optimum conditions with no water and nutrients stresses. The trials for model evaluation were conducted using the same varieties under four different nitrogen (N) rates (0, 60, 120 and 180 kg N ha⁻¹). A 30-year (1985–2014) term simulation was performed to determine effect of varying sowing dates on yields of two maize varieties (SAMMAZ-15 and SAMMAZ-16) in the Sudan savanna (SS), northern Guinea savanna (NGS), and southern Guinea savanna (SGS) zones. The calibration results showed that the cultivar coefficients of the two maize varieties resulted in simulated growth and development parameters that were in good agreement with observed parameters. Model evaluation showed a good agreement between simulated and observed data for phenology and growth of maize. This demonstrated the potential of the CERES-Maize model to simulate growth and yield of maize in the Nigeria savannas. Results of 30-year sensitivity analysis with 9 different sowing windows showed that in SS, sowing the intermediate maize varieties from early to mid-June produced the highest grain yields. In NGS, the optimum sowing windows were found between late June and late July for the both varieties. In SGS, the optimum sowing window is from early June to late July for SAMMAZ-15 and mid-June to late July for SAMMAZ-16. These planting windows gave the highest long-term average yields for each variety. The variety SAMMAZ-15 was found to be best performing across the three agro-ecologies. Maize performance was generally higher in NGS than in SGS. SS in the Sudan savanna recorded the lowest yield compared with other locations.

• Genotype by Environment Interaction (GEI) makes it difficult for breeders and growers to select stable, high yielding varieties across different environments thereby reducing the effectiveness of the selection process. • Determining the magnitude of GEI and the stability of varieties can be challenging, as such, crop models can be employed to complement this process. • Dynamic models that can simulate the response of growth and development of crops to varying abiotic environmental factors have the potential to explain yield differences due to temporal and spatial variability. • Crop Simulation Models were used to complement multi environment trials (METs) with a view to enhancing selection of high yielding varieties across multiple locations. • The model simulations matched actual observations and produced similar ranking, indicating that properly calibrated and evaluated CERES-Maize model can complement METs.

CERES-Maize model was used to determine nitrogen fertilizer requirements of early maturing maize varieties in the Sudan Savanna. Data were collected from 2013 to 2014 field experiments conducted in Bayero University Kano, (BUK), Kano, Nigeria. The experiments consisted of three nitrogen fertilizer levels (0, 60, and 120 kg N ha⁻¹) and two early maize varieties (EVDT and 2009 TZEEW). Sensitivity analysis was performed to evaluate the responses of the two maizes to N fertilizers and for economic and strategic responses. The model predicted grain yield and harvest index reasonably well for the two varieties. Increasing N application from 0 to 30 kg N ha⁻¹ increased grain yield by 105%, when nitrogen (N) rate was increased to 60 kg N ha⁻¹, grain yield increased by 226%. Yield increases of 364%, 451%, and 461% was observed when N rate increased from 0 to 90, 120, and 150 kg ha⁻¹, respectively.

Mobile smartphones, open-source set tools, and mobile applications have provided vast opportunities for timely, accurate, and seamless data collection, aggregation, storage, and analysis of agricultural data in sub-Saharan Africa (SSA). In this paper, we advanced and demonstrated the practical use and application of a mobile smartphone-based tool, i.e., the Open Data Kit (ODK), to assemble and keep track of real-time maize (Zea mays L.) phenological data in three SSA countries. Farmers, extension agents, researchers, and other stakeholders were enlisted to participate in an initiative to demonstrate the applicability of mobile smartphone-based apps and open-source servers for rapid data collection and management. A pre-installed maize phenology data application based on the ODK architecture was provided to the participants (n = 75) for maize data collection and management over the maize growing season period in 2015–2017. The application structure was custom designed based on maize developmental stages such as planting date, date of emergence, date of first flowering, anthesis, grain filling, and maturity. Results showed that in Ethiopia, early maturing varieties took 105 days from sowing to maturity in low altitudes, whereas late-maturing varieties took up to 190 days to complete developmental stages in high altitude areas. In Tanzania, a similar trend was observed, whereas in Nigeria, most existing varieties took an average of 100 days to complete their developmental stages. Furthermore, the data showed that the durations from sowing to emergence, emergence to flowering, flowering to maturity were mainly dependent on temperature. The values of growing degree for each phase of development obtained from different planting dates were almost constant for each maize variety, which showed that temperature and planting time are the main elements affecting the rate of maize development. The data aggregation approach using the ODK and on-farm personnel improved efficiency and convenience in data collection and visualization. Our study demonstrates that this system can be used in crop management and research on many spatial scales, i.e., local, regional, and continental, with relatively high data collation accuracy.