The recycling of spent lithium-ion batteries (LIB) is becoming increasingly important with regard to environmental, economic, geostrategic, and health aspects due to the increasing amount of LIB produced, introduced into the market, and being spent in the following years. The recycling itself becomes a challenge to face on one hand the special aspects of LIB-technology and on the other hand to reply to the idea of circular economy. In this paper, we analyze the different recycling concepts for spent LIBs and categorize them according to state-of-the-art schemes of waste treatment technology. Therefore, we structure the different processes into process stages and unit processes. Several recycling technologies are treating spent lithium-ion batteries worldwide focusing on one or several process stages or unit processes.

The zigzag (ZZ) classifier is a sorting and classification device with a wide range of applications (e.g. recycling, food industry). Due to the possible variation of geometry and process settings, the apparatus is used for various windows of operation due to the specifications of the separation (e.g. cut sizes from 100 µm to several decimetres, compact and fluffy materials as well as foils). Since the ZZ classifier gains more and more interest in recycling applications, it is discussed in this paper, with regards to its design, mode of operation, influencing parameters and the research to date. Research on the ZZ-classifier has been ongoing on for more than 50 years and can be divided into mainly experimental studies and modelling approaches.

In order to ensure environmentally friendly mobility, electric drives are increasingly being used. As a result, the number of used lithium-ion batteries has been rising steadily for years. To ensure a closed recycling loop, these batteries must be recycled in an energy- and raw material-efficient manner. For this purpose, hydrometallurgical processes are combined with mechanical pre-treatment, including disintegration by mills, crushers and/or shears. Alternatively, electrohydraulic fragmentation (EHF) is also of great interest, as it is considered to have a selective fragmentation effect. For a better comparison, different application scenarios of EHF with other methods of mechanical process engineering for the treatment of lithium-ion batteries are investigated in the present study.

Lithium-ion batteries (LIBs) are an important pillar for the sustainable transition of the mobility and energy storage sector. LIBs are complex devices for which waste management must incorporate different recycling technologies to produce high-quality secondary (raw) materials at high recycling efficiencies (RE). This contribution to LIB recycling investigated the influence of different pretreatment strategies on the subsequent processing. The experimental study combined different dismantling depths and depollution temperatures with subsequent crushing and thermal drying. Therein, the removal of organic solvent is quantified during liberation and separation. This allows to evaluate the safety of cell opening according to the initial depollution status. These process steps play a key role in the recycling of LIBs when using the low-temperature route. Therefore, combinations of pretreatment and processing steps regarding technical and economic feasibility are discussed. Moreover, the process medium and equipment properties for a safe cell opening, the technical recycling efficiencies and their consequences on future industrial LIB waste management are pointed out.

The rising production of lithium-ion batteries (LIBs) due to the introduction of electric mobility as well as stationary energy storage devices demands an efficient and sustainable waste management scheme for legislative, economic and ecologic reasons. One crucial part of the recycling of end-of-life (EOL) LIBs is mechanical processes, which generate material fractions for the production of new batteries or further metallurgical refining. In the context of safe and efficient processing of electric vehicles’ LIBs, crushing is usually applied as a first process step to open at least the battery cell and liberate the cell components. However, the cell opening method used requires a specific pretreatment to overcome the LIB’s hazard potentials. Therefore, the dependence on pretreatment and crushing is investigated in this contribution. For this, the specific energy input for liberation is determined and compared for different recycling strategies with respect to dismantling depth and depollution temperatures. Furthermore, the respective crushing product is analyzed regarding granulometric properties, material composition, and liberation and decoating behaviour depending on the pretreatment and grid size of the crushing equipment. As a result, finer particles and components are generated with dried cells. Pyrolysis of cells as well as high dismantling depths do not allow to draw exact conclusions and predictions. Consequently, trends for a successful separation strategy of the subsequent classifying and sorting processes are revealed, and recommendations for the liberation of LIBs are derived.