The development of realistic channel models that can efficiently and accurately describe a wireless propagation channel is a key research area. In this study, a generalised three‐dimensional (3D) scattering channel model for land mobile systems is proposed to simultaneously describe the angular arrival of multi‐path signals in the azimuth and elevation planes. The model considers a base station located at the centre of a 3D semi‐spheroid‐shaped scattering region and a mobile station (MS) located within the region. Using this channel model, the authors first derive the closed‐form expression for the joint and marginal probability density functions of the angle of arrival and time of arrival measured at the MS corresponding to the azimuth and elevation angles. Next, they derive an expression for the Doppler spectra distribution due to the motion of the MSs. Furthermore, they analyse the performance of multiple‐input and multiple‐output antenna systems and their numerical results. The results show that the proposed 3D scattering channel model performs better compared with previously proposed 2D models for outdoor and indoor environments. They compare the results with previous scattering channel models and measurement results to validate the generalisation of their model.
Reconfigurable intelligent surfaces (RISs), as one of the potential key technologies in sixth generation (6G) mobile communications, feature low costs, low energy consumption, and ease of deployment. In this paper, we introduce the RIS technology into the maritime wireless communication scenario, which can transform the wireless transmission environment from uncontrollable to controllable. In the considered communication model, we derive the complex channel impulse response for the RIS propagation link and non-line-of-sight propagation link, respectively. This can be used to capture the physical properties of a communication model from different perspectives. Furthermore, based on the designed communication model, we investigate the correlation properties of propagation links in the space and time domains; they are the space correlation statistics and time correlation statistics. The provided framework addresses the technical bottleneck of the existing RIS channel modeling methods that fail to balance precision and efficiency, improves the channel model matching efficiency in the design process of RIS-enabled near-field maritime communication systems, and provides technical support for the rapid development of the 6G mobile communication industry.
As communication technologies continue to evolve, Reconfigurable Intelligent Surfaces (RISs) have become a crucial and highly potential technology for sixth-generation (6G) mobile communication systems. Their key competitive advantages lie in their cost-effectiveness, minimal power consumption, and simple deployment. To address the limitations of current communication paradigms, this study innovatively integrates RIS technology into vehicle-to-vehicle (V2V) communication systems. Current methodologies fail to comprehensively elucidate the transmission principles underlying RIS-assisted V2V fluid antenna system (FAS) communications. The current channel characteristic analysis techniques and modeling theories struggle to achieve a balance between computational accuracy and computational complexity. To overcome these problems, this study systematically constructed a multipath sub-channel model in RIS-assisted V2V communication. Combining detailed simulation with theoretical analysis, a reliable parametric channel statistical model was established. This progress successfully overcame the main obstacle of the traditional RIS channel modeling method, which was unable to coordinate accuracy and efficiency.
In this paper, we propose a geometry-based channel model for multiple-input multiple-output (MIMO) vehicle-to-vehicle (V2V) communications in practical tunnel scenarios. In the proposed channel model, the waves transmitted from the transmitter experience line-of-sight (LoS) and non-LoS (NLoS) before arriving at the receiver. The time-varying parameters of the propagation paths and angles are derived to characterize the channel non-stationarity. Furthermore, we derive the correlation property functions of the proposed V2V channel model; they are space cross-correlation functions (CCFs), temporal auto-correlation functions (ACFs), frequency CCFs, as well as the Doppler power spectrum distributions (PSDs). Numerous simulation results of the propagation characteristic for different physical properties of the tunnel, as well as the different motion properties of the transmitter and receiver, are studied and discussed; they demonstrate that the proposed channel model is suitable for describing the practical V2V tunnel communication scenarios.
In view of the significant impact of flight-induced jitter on the performance of unmanned aerial vehicle (UAV) communication systems, we propose a three-dimensional wideband non-stationary channel model. The model takes into account the line-of-sight (LoS) and non-line-of-sight (NLoS) components in the transmission link from the UAV transmitter to the UAV receiver. Both the transmitter and the receiver are equipped with uniform array antennas. In contrast to previous studies that focus solely on UAV pitch jitter models, the UAV's jitter attitude is simulated as random fluctuations in pitch, azimuth, and roll angles. The rotational jitter is modeled using a sinusoidal random process. Furthermore, derived the typical statistical characteristics of the proposed model, including spatial cross-correlation function(CCFs) and temporal autocorrelation function(ACFs). The numerical simulation results are then compared with those of existing relevant models, demonstrating the effectiveness of the proposed channel model.
Intelligent reflecting surface (IRS) has emerged as a promising solution to establish propagation paths in non-line-of-sight (NLoS) scenarios, effectively mitigating blockage challenges in direct vehicle-to-infrastructure (V2I) links. This study investigates a time-varying multi-IRS-assisted multiple-input multiple-output (MIMO) communication system, aiming to maximize the system sum rate through the joint optimization of base station (BS) precoding and IRS phase configurations. The formulated problem exhibits inherent non-convexity and time-varying characteristics, posing significant optimization challenges. To address these, we propose a low-complexity dimension-wise sine maximization (DSM) algorithm, grounded in the sum path gain maximization (SPGM) criterion, to efficiently optimize the IRS phase shift matrix. Concurrently, the water-filling (WF) algorithm is employed for BS precoding design. Simulation results demonstrate that compared with traditional methods, the proposed DSM algorithm achieves a 14.9% increase in sum rate, while exhibiting lower complexity and faster convergence. Furthermore, the proposed multi-IRS design yields an 8.7% performance gain over the single-IRS design.