This work presents a new computational framework for designing profile extrusion dies. The framework utilizes High-Performance Computing (HPC) resources to optimize parameterized die flow channels within a one-day time-frame, resulting in a significant reduction in the typical design time required for profile extrusion dies. By employing objective function-controlled convergence criteria, the framework achieved a 50% reduction in calculation time compared to runs where only the unknowns residuals were considered for the same purpose. Furthermore, it offers full optimization capability, requiring no user intervention once the CAD parameterization is complete. OpenFOAM and Dakota were employed for modeling and optimization, respectively. Fusion 360 and Onshape CAD software were used for drawing and parameterizing the flow channel. By leveraging HPC systems, the optimization framework can automatically test hundreds of alternative geometries within one day to find the optimal solution. This research demonstrates the feasibility and advantages of HPC-driven extrusion die optimization, which contributes to increased efficiency and competitiveness in the manufacturing industry.
This study used the Discrete Element Method (DEM) coupled with the Moving Particle Semi-implicit (MPS) method to investigate the process of drying in the centrifugal unit of a pelletizing system in polymer processing. The effects of various flight angles (10°, 45°, and 70°) and rotor speeds (1280, 1600, and 1920 rpm) on drying efficiency, polymer pellet transport, polymer pellet accumulation, and power consumption were examined. The results showed that the flight angle significantly influenced drying performance. At 1600 rpm, the 10° flight angle configuration required the least power (10.94 kW) but resulted in inefficient water separation, which led to an increase in water droplets (i.e., higher moisture content) in the upper part of the centrifugal unit and near the outlet. With a 70° flight angle, water removal was most effective, but polymer pellet transport efficiency was lower due to centrifugal forces becoming dominant. A 45° flight angle provided the best balance between drying efficiency and power consumption, requiring 16.42 kW while achieving the most efficient polymer pellet transport. Rotor speed also played a crucial role: lower speeds enhanced water removal and reduced power demand but limited throughput, whereas higher speeds facilitated centrifugal separation at the cost of increased power consumption. The optimal combination of the rotor speed and flight angle was found to be 45° at 1280 rpm, which offered an effective trade-off between drying performance and power efficiency.
This study presents a detailed numerical analysis of a centrifugal dryer in polymer pelletizing systems, focusing on the effects of rotor geometry and speed on mechanical drying performance. Employing a coupled Discrete Element Method (DEM) and Moving Particle Semi-implicit (MPS) approach to simulate particle interactions and fluid dynamics, we investigated rotor flight angles (10°, 45°, and 70°), number of flights (10–25), and speeds (1,280, 1,600, and 920 rpm). Performance metrics included pellet discharge count, discharge time for 1,000 pellets, residence time distribution, and energy consumption. Results indicate that a 45° flight angle consistently promotes stable discharge, efficient pellet transport, and narrow residence time distributions. The configuration with 45°, 14 flights, and 1,280 rpm achieved the highest throughput with well-controlled residence times (1.94–6.95 s) and moderate energy use (16.21 Wh), balancing efficiency and energy consumption. In contrast, 10° configurations lacked sufficient lift, while 70° angles caused recirculation and particle trapping. Increasing flight count improved confinement and uniformity but led to inefficiencies at high speeds. Rotor speed improved performance up to an optimal point beyond which instability and energy loss occurred.