Using metamaterial absorbers, we have shown that metallic layers in the absorbers do not necessarily constitute undesired resistive heating problem for photovoltaics. Tailoring the geometric skin depth of metals and employing the natural bulk absorbance characteristics of the semiconductors in those absorbers can enable the exchange of undesired resistive losses with the useful optical absorbance in the active semiconductors. Thus, Ohmic loss dominated metamaterial absorbers can be converted into photovoltaic near-perfect absorbers with the advantage of harvesting the full potential of light management offered by the metamaterial absorbers. Based on experimental permittivity data for indium gallium nitride, we have shown that between 75%–95% absorbance can be achieved in the semiconductor layers of the converted metamaterial absorbers. Besides other metamaterial and plasmonic devices, our results may also apply to photodectors and other metal or semiconductor based optical devices where resistive losses and power consumption are important pertaining to the device performance.
Metamaterials have introduced a whole new world of unusual materials with functionalities that cannot be attained in naturally occurring material systems by mimicking and controlling the natural phenomena at subwavelength scales. However, the inherent absorption losses pose a fundamental challenge to the most fascinating applications of metamaterials. Based on a novel plasmon injection (PI or ) scheme, we propose a coherent optical amplification technique to compensate losses in metamaterials. Although the proof of concept device here operates under normal incidence only, our proposed scheme can be generalized to an arbitrary form of incident waves. The scheme is fundamentally different from major optical amplification schemes. It does not require a gain medium, interaction with phonons, or any nonlinear medium. The scheme allows for loss-free metamaterials. It is ideally suited for mitigating losses in metamaterials operating in the visible spectrum and is scalable to other optical frequencies. These findings open the possibility of reviving the early dreams of making “magical” metamaterials from scratch.
Near-field optics and superlenses for imaging beyond Abbe’s diffraction limit are reviewed. A comprehensive and contemporary background is given on scanning near-field microscopy and superlensing. Attention is brought to recent research leveraging scanning near-field optical microscopy with superlenses for new nano-imaging capabilities. Future research directions are explored for realizing the goal of low-cost and high-performance sub-diffraction-limited imaging systems.
We propose an alternative class of magneto-optical metamaterials offering enhanced angle of rotation in polarization compared to pure magneto-optical materials. In this approach, the permittivity tensor of a magneto-optical material is tailored by embedded wire meshes. We show that the angle of rotation in the magneto-optical metamaterial can be enhanced up to 9 times compared to pure magneto-optical material alone, while the polarization extinction ratio remains below −20dB over more than 2 THz bandwidth and the attenuation coefficient is approximately 1.5dB μm−1.
Using interplay between surface plasmons and metamaterials, we propose a different technique for novel metamaterial designs. We show that surface plasmons existing on thin metal surfaces can be used to ``drive'' nonresonant structures in their vicinity to provide new types of electric and magnetic resonators. These resonators strictly adhere to plasmon dispersion of the host-metal film. The operating frequency of the resultant metamaterials can be scaled to extremely high frequencies, otherwise not possible with conventional split-ring-resonator-based designs. Our approach opens possibilities for theory and experiment in the interface of plasmonics and metamaterials to harvest many potential applications of both fields combined.