Little is known about emissions and exposure potential from vat polymerization additive manufacturing, a process that uses light-activated polymerization of a resin to build an object. Five vat polymerization printers (three stereolithography (SLA) and two digital light processing (DLP) were evaluated individually in a 12.85 m3 chamber. Aerosols (number, size) and total volatile organic compounds (TVOC) were measured using real-time monitors. Carbonyl vapors and particulate matter were collected for offline analysis using impingers and filters, respectively. During printing, particle emission yields (#/g printed) ranged from 1.3 ± 0.3 to 2.8 ± 2.6 x 108 (SLA printers) and from 3.3 ± 1.5 to 9.2 ± 3.0 x 108 (DLP printers). Yields for number of particles with sizes 5.6 to 560 nm (#/g printed) were 0.8 ± 0.1 to 2.1 ± 0.9 x 1010 and from 1.1 ± 0.3 to 4.0 ± 1.2 x 1010 for SLA and DLP printers, respectively. TVOC yield values (µg/g printed) ranged from 161 ± 47 to 322 ± 229 (SLA printers) and from 1281 ± 313 to 1931 ± 234 (DLP printers). Geometric mean mobility particle sizes were 41.1–45.1 nm for SLA printers and 15.3–28.8 nm for DLP printers. Mean particle and TVOC yields were statistically significantly higher and mean particle sizes were significantly smaller for DLP printers compared with SLA printers (p < 0.05). Energy dispersive X-ray analysis of individual particles qualitatively identified potential occupational carcinogens (chromium, nickel) as well as reactive metals implicated in generation of reactive oxygen species (iron, zinc). Lung deposition modeling indicates that about 15–37% of emitted particles would deposit in the pulmonary region (alveoli). Benzaldehyde (1.0–2.3 ppb) and acetone (0.7–18.0 ppb) were quantified in emissions from four of the printers and 4-oxopentanal (0.07 ppb) was detectable in the emissions from one printer. Vat polymerization printers emitted nanoscale particles that contained potential carcinogens, sensitizers, and reactive metals as well as carbonyl compound vapors. Differences in emissions between SLA and DLP printers indicate that the underlying technology is an important factor when considering exposure reduction strategies such as engineering controls.
Objective: Fused filament fabrication “3-dimensional (3-D)” printing has expanded beyond the workplace to 3-D printers and pens for use by children as toys to create objects. Materials and methods: Emissions from two brands of toy 3-D pens and one brand of toy 3-D printer were characterized in a 0.6 m3 chamber (particle number, size, elemental composition; concentrations of individual and total volatile organic compounds (TVOC)). The effects of print parameters on these emission metrics were evaluated using mixed-effects models. Emissions data were used to model particle lung deposition and TVOC exposure potential. Results: Geometric mean particle yields (106–1010 particles/g printed) and sizes (30–300 nm) and TVOC yields (<detectable to 590 µg TVOC/g printed) for the toys were similar to those from 3-D printers used in workplaces. Metal emissions included manganese (1.6–92.3 ng/g printed) and lead (0.13–1.2 ng/g printed). Among toys, extruder nozzle conditions (diameter, temperature) and filament (type, color, and extrusion speed) significantly influenced particle and TVOC emissions. Dose modeling indicated that emitted particles would deposit in the lung alveoli of children. Exposure modeling indicated that TVOC concentration from use of a single toy would be 1–31 µg/m3 in a classroom and 3–154 µg/m3 in a residential living room. Discussion: Potential exists for inhalation of organic vapors and metal-containing particles during use of these toys. Conclusions: If deemed appropriate, e.g. where multiple toys are used in a poorly ventilated area or a toy is positioned near a child’s breathing zone, control technologies should be implemented to reduce emissions and exposure risk.