We have theoretically designed a double-lattice photonic crystal surface-emitting laser (PCSEL) based on triangular and circular holes. In the design, porous-GaN which has the properties of lower refractive index and high quality stress-free homo-epitaxy with GaN, was first proposed to be the cladding layer for GaN-PCSEL. The finite difference-time domain (FDTD), the plane wave expansion (PWE), and the rigorous coupled-wave analysis (RCWA) method were employed in the investigation. Our simulations achieved a radiation constant of up to 50 cm-1 and a slope efficiency of more than 1 W/A while maintaining a low threshold gain. We conducted a systematic study on the effects of the filling factor, etching depth, and holes shift, on the performance of the PCSEL. The findings indicate that increasing the filling factor improves the radiation constant and slope efficiency. Asymmetric hole patterns and varying etching depths have a similar effect. The introduction of asymmetric patterns and a double lattice in the photonic crystal breaks the symmetry of electric fields in the plane, while different etching depths of the two holes break the symmetry in the vertical direction. Additionally, altering the shift of the double lattice modifies the optical feedback in the resonators, resulting in variations of cavity loss and confinement factor.
We design and theoretically investigate freestanding gallium nitride (GaN) high contrast grating (HCG) membranes as broadband reflectors operating at the visible wavelengths. Optimization of the grating structural parameters is accomplished by using particle swarm optimization (PSO), and rigorous coupled-wave analysis (RCWA) method is adopted to evaluate the optical spectrum and internal electric field intensity distribution of all structures. The proposed reflector exhibits a 99% reflectance bandwidth of 84 nm, and good angular insensitivity of about 10.2° at the wavelength of 470 nm. The tolerance of fabrication deviation is also examined by numerical analysis of the reflector performance through varying the grating structural parameters. The GaN HCG broadband reflector can be potentially assembled in GaN-based vertical cavity surface-emitting lasers (VCSELs) or other novel integrated photonic devices.
Considering the compensation of thermo-optic coefficients (TOC) between GaN-based cavity and TiO 2 photonic crystal (PhC) layer, we have theoretically designed a photonic crystal surface emitting laser (PCSEL) with temperature-insensitive wavelength. The structure includes a freestanding GaN membrane with embedded multiple InGaN/GaN quantum well (QW) layer and the top TiO 2 PhC layer. The high refractive index (RI) of PhC and the freestanding membrane cavity structure cooperate to enable a stronger field-coupling in PhC, thus fulfill the athermal coupling condition. Interestingly, the wavelength temperature dependence is only 0.0015 nm/°C for such PCSEL with a 82% PhC confinement factor, and its athermal property is proportional to the field confinement factor in TiO 2 PhC layer. To illustrate, a general formula has been developed after the investigations of thermo-optic effect and thermal expansion effect.
A GaN-based blue photonic crystal surface emitting laser (PCSEL) featured with membrane configuration was proposed and theoretically investigated. The membrane dimension, photonic crystal (PhC) material, lattice constant and thickness were studied by RCWA (Rigorous Coupled Wave Analysis), FDTD (Finite Difference Time Domain) simulations with the confinement factor and gain threshold as indicators. The membrane PCSEL’s confinement factor of active media is of 13~14% which is attributed to multi-pairs of quantum wells and efficient confinement of the mode in the membrane cavity with air claddings. The excellent confinement factor and larger Q factor of resonance mutually contribute to the lower gain threshold of the design (below 400 cm−1 for GaN-PhC with 100 nm thick top and bottom GaN layer, 40 nm hole radius and 40 nm depth). The PhC confinement factor exceeds 13% and 6% for TiO2-PhC with 80 nm and 60 nm PhC thickness and 20 nm and 40 nm distance between PhC and active media, respectively. It is around two times larger than that of GaN-PhC, which is attributed to the higher refractive index of TiO2 that pulls field distribution to the PhC layer.
Conventional sidewall gratings in GaN-based distributed feedback (DFB) laser diodes (LD) have a thick p-type layer, which may cause current spreading and carrier-induced anti-guiding effects, severely deteriorating the lasers performance. In this study, we report a novel fabrication technology to not only reduce the remaining p-type layer in the sidewall gratings but also realize close-coupled sidewall gratings. Afterwards, we further investigate the influence of the sidewall gratings etching depth on GaN-based DFB LDs. The results show an almost unchanged current injection efficiency, nearly coincided I–V curve and a near-field emission width for shallow etched structures, which indicate that the current spreading is neglectable in GaN-based ridge structure LDs. Based on this analysis, GaN-on-Si DFB LDs with an emission wavelength of 414 nm, full width at half maxima of 22 pm, and side mode suppression ratio of 19.1 dB were realized.