YI Cui

Prof. YI Cui

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2021 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
HZHuabing Zhang
Huabing Zhang
YCYI Cui
YI Cui
GLGang Liang
Gang Liang
LLLiting Li
Liting Li
GZGuoyong Zhang
Guoyong Zhang
XQXinqi Qiao
Xinqi Qiao

30 October 2020 in International Journal of Engine Research
Verified
Journal Article
Closed access
PDF file
LWLimin Wu
Limin Wu
YFYan Fu
Yan Fu
MLMei Li
Mei Li
GLGang Liang
Gang Liang
YZYanting Zhang
Yanting Zhang
YCYI Cui
YI Cui
The elastic deformation of the crankshaft and engine block has important effects on lubrication performance of main bearings of the diesel engine. But the effect of main bearing caps was rarely analyzed. The purpose of this article is to analyze and compare the tribological performances of main bearings of a 20-V medium-speed diesel engine with different materials and structures of main bearing caps. A coupled multi-elastic body and elasto-hydrodynamic model is established for a 20-V medium-speed diesel engine. The deformations of engine block, crankshaft and bearing caps are simulated with finite element modal condensation method. The bearing lubrication analysis is based on the extended Reynolds equation considering the deformation of contact surface and solved by finite difference method. Two materials and four structures of the main bearing cap are analyzed with the coupled model. The distribution of oil film pressure, thickness and bearing thermal loads are obtained and analyzed. The main bearing cap of iron is better than steel on bearing lubrication performance. With the lower edge stiffness of bearing cap, the maximum oil film pressure of bearing can be reduced by 13%. Meanwhile, the bearing thermal load can be reduced by 53%. The results show that when the bearing cap material is iron and with large trough on both sides of bearing cap, the peak value of edge pressure and the average heat load of main bearing can be reduced effectively under the premise of ensuring stiffness.

1 November 2013 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
YCYI Cui
YI Cui
ZHZhilong Hu
Zhilong Hu
KDKangyao Deng
Kangyao Deng
QWQifu Wang
Qifu Wang
The increasingly stringent NOx emission regulations of the International Marine Organization (IMO) have demanded new design concepts and architectures for diesel engines. The Miller cycle, which reduces the in-cylinder combustion temperature by reducing the effective compression ratio, is the principal measure used for reducing NOx specific emissions; however, this is at the cost of volumetric efficiency and engine power. Therefore, it is essential to combine the Miller cycle with a highly boosted turbocharging system, two-stage turbocharging for example, to recover the power. While much work has been done in the development of Miller-cycle regulatable two stage turbocharging system for marine diesel engines, there are nonetheless few, if any, thorough discussions on system optimization and performance comparison. This study presents a theoretical optimization design process for a Miller-cycle regulatable, two-stage turbocharging system for marine diesel engines. First, the different scenarios and regulation methods of two-stage turbocharging systems are compared according to the system efficiency and equivalent turbine flow characteristics. Then, a multizone combustion model based on a one-dimensional cycle simulation model is established and used for the optimization of valve timings according to the IMO NOx emission limits and fuel efficiencies. The high- and low-stage turbochargers are selected by an iterative matching method. Then, the control strategies for the boost air and high-stage turbine bypass valves are also studied. As an example, a Miller-cycle regulatable, two-stage turbocharging system is designed for a highly boosted high-speed marine diesel engine. The results show that NOx emissions can be reduced by 30% and brake specific fuel consumption (BSFC) can also be improved by a moderate Miller cycle combined with regulatable two-stage turbocharging.

8 January 2021 in Journal of Tribology
Verified
Journal Article
Closed access
PDF file
YWYi Wang
Yi Wang
LGLiang Gang
Liang Gang
SLShuo Liu
Shuo Liu
YCYI Cui
YI Cui
In this paper, a fretting damage model based on fractal theory is proposed. The Weierstrass–Mandelbrot function of fractal theory is used to represent the rough contact surface, and a corresponding contact parameter analysis method is also established. Based on neural network algorithm, the values of fractal parameters are fitted, and the fitting accuracy has been greatly improved compared with traditional methods. According to the fractal parameters of the actual surface, the fretting wear process of the rough contact surface is analyzed based on theory of adhesive and three-body abrasive wear. A generic program for the analysis of three-dimensional fretting wear problems is also proposed. Compared with material tests, the prediction error of the fretting wear simulation model is 13.4% for wear depth and 16.7% and 3.9% for width and length of wear scar in stable wear stage. The prediction results show that the model can be applied to the prediction of the actual three-dimensional fretting wear model.

18 May 2020 in Coatings
Verified
Journal Article
Open access
PDF file
BLBugao Lyu
Bugao Lyu
XMXianghui Meng
Xianghui Meng
RZRui Zhang
Rui Zhang
YCYI Cui
YI Cui
As a vital component in the valve train of internal combustion engines (ICEs), the cam/tappet pair undergoes high mechanical and thermal loads and usually works in a mixed and boundary lubrication regime. This leads to considerable friction loss and severe surface wear. Currently, the applications of diamond-like carbon (DLC) coatings for automotive components are becoming a promising strategy to reduce the friction and lower the wear. However, the practical performance of the coating is related to many factors, including friction coefficient, thermal properties, load conditions, and surface topography. In order to investigate these factors and successively improve the fuel efficiency and durability of the cam/tappet pair, a comprehensive multi-physics analytical model considering the mechanical, thermal and tribological properties of DLC coatings is established in this paper. Simulations are carried out for the coated as well as the uncoated cam/tappet conjunctions with different roughness at various ambient temperatures. The results show that both the fluid and asperity contact friction for the coated cam/tappet conjunction are significantly reduced due to their favourable characteristics. As a result, the friction loss of the coated cam/tappet pair is noticeably lower by almost 40% than that of the uncoated, despite a slightly higher asperity contact. In addition, the wear resistance of DLC coatings is also impressive, although the wear condition becomes progressively more severe with the increasing ambient temperature. Moreover, the roughness has complex effects on the friction and wear under different conditions.

27 September 2023 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
PDPan Deng
Pan Deng
MXMingcai Xing
Mingcai Xing
JLJinguo Lin
Jinguo Lin
BZBohong Zhang
Bohong Zhang
YCYI Cui
YI Cui