Muhammad Kashif

Dr. Muhammad Kashif

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2024 in Archives of Advanced Engineering Science
Verified
Journal Article
Open access
PDF file
MJMansoor Jamal
Mansoor Jamal
GNGul Asimullah Khan Nabi
Gul Asimullah Khan Nabi
HSHao Sun
Hao Sun
KUKhair Ullah
Khair Ullah
OKOsama Ali Khattak
Osama Ali Khattak
AMAalia Masood
Aalia Masood
The current study describes a unique method for degrading methylene blue dye utilizing Mn-doped Bi2O3 nanoparticles (NPs) exposed to UV light. Bi2O3 nanoparticles (NPs) doped with Mn were produced using a hydrothermal process. Scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and were use to characterize the prepared nanoparticles. It was discovered that the band gaps of Mn/ Bi2O3 NPs are 2%, 3%, and 4%, respectively, and are 4.13 eV, 3.92 eV, and 3.77 eV. Functional group identification using Fourier transforms infrared spectroscopy (FT-IR). Mn-doped Bi2O3 nanoparticles were captured in SEM pictures at various magnifications, and the photos clearly display the particles' dual morphologies, cubic and cylindrical. The Mn-doped Bi2O3 particles were found to be crystalline, with mean diameters of 20 nm, according to the XRD data. The photodegradation efficiency of Mn/Bi2O3 at experimental dye concentrations of 2%, 3%, and 4% was determined to be 90.29, 91.6, and 93.16 percent, respectively, over a 150 minute time interval. At the ideal catalyst dosage of 0.2 g and concentration of 40 ppm, a high percentage of dye degradation was observed. Numerous metals have been doped into zinc oxides, although no work has documented doping of Bi2O3 with Mn. Additionally, it was utilized for the first time to look at the deterioration of methylene blue dye. Received: 11 May 2024 | Revised: 9 July 2024 | Accepted: 18 July 2024 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data are available from the corresponding author upon reasonable request. Author Contribution Statement Mansoor Jamal: Conceptualization; Gul Asimullah Khan Nabi: Methodology; Hao Sun: Software; Khair Ullah: Validation; Osama Ali Khattak: Formal analysis; Muhammad Kashif: Investigation; Salman Khan: Resources; Mohsin Alam: Data curation; Shah Hussain: Writing - original draft; Mati Ullah: Writing - review & editing; Seeqal Aleena: Visualization; Hameedul Haq: Supervision; Saira Umar: Project administration; Muhammad Atif: Project administration; Ijaz Hussain: Project administration; Aalia Masood: Project administration.

21 May 2023 in Natural and Applied Sciences International Journal (NASIJ)
Verified
Journal Article
Open access
PDF file
SMSheraz Muhammad
Sheraz Muhammad
AAAsif Ali
Asif Ali
JSJehangir Shah
Jehangir Shah
MHMuhammad Hamza
Muhammad Hamza
MKMuhammad Kashif
Muhammad Kashif
AIArshad Iqbal
Arshad Iqbal
Recently, nanoparticles from 1 to 100 nm gained attention. Due to their eco-friendliness and medicinal potential, natural ingredients are used more to synthesise AgONPs. This work synthesises AgONPs from Moringa oleifera stem extract and tests their anti-inflammatory activity. Prepared AgONPs were characterised through UV-Visible, FTIR, XRD, SEM and EDX. According to the results, Moringa oleifera stem extract reduced silver ions to AgO with an average crystalline size of 23 nanometres. In addition, the study compared the anti-inflammatory properties of green AgONPs with those of standard pharmacological drugs. At a dose of 80 mL-1, synthesised nanoparticles showed strong anti-inflammatory effects compared to the drug diclofenac sodium, which had an 85% inhibition rate. The AgONPs only had a 78% inhibition rate. Based on the results, AgONPs are compatible with diclofenac sodium. These findings show that AgONPs synthesised from Moringa oleifera stem extract may cure inflammation related diseases.

13 June 2024 in Brazilian Journal of Science
Verified
Journal Article
Open access
PDF file
BUBushra
Bushra
MKMuhammad Kashif
Muhammad Kashif
KHKhairullah
Khairullah
AKAzmat Ali Khan
Azmat Ali Khan
HSHao Sun
Hao Sun
JKJasim Kamal
Jasim Kamal
In recent times, environmental pollution has become a pressing issue. Different methods have been developed to detach hazardous materials from H2O bodies. Among these techniques, photo-catalysis has emerged as a low-cost and advanced method. However, finding a potent photocatalyst has been a topic of considerable research. Our study prepared CuO from copper acetate using hydrothermal treatment in an autoclave at 170 ºC for 14 hours. We introduced various quantities of Fe by adding FeSO4 mixture to Cu (CH3COO)2, following the identical method for preparing CuO. The resulting precipitate was cleaned with deionized H2O and dried at 100 °C. The prepared substance was then heated at 450 ºC in a muffle furnace for 60 minutes. We characterized the manufacture of photocatalysts utilizing various techniques such as Ultraviolet (UV), FT-IR, SEM, EDX, and XRD. Our Ultraviolet (UV) spectrum analysis helped us recognize the adsorption spectroscopic analysis of un-doped and doped CuO with various ratios of Fe. FTIR spectroscopic analysis helped us identify functional groups in CuO NPs. Our XRD study showed the monoclinic composition of copper oxide nanoparticles. The SEM picture suggested that NPs exist in a spherical shape. We studied the catalytic activity of synthesized NPs concerning crystal violet (CV) colorant degradation below a direct ray of light irradiation. Our results showed that the degradation productiveness, as compared to CV colorant, was about 93.52% in 180 min. This research is of great importance in the quest for effective and sustainable solutions to environmental problems. The examination of electrical properties highlighted the promising aspects of Fe-doped CuO, particularly at 6% doping. This variant demonstrated superior dielectric parameters, lower tangent loss, semiconductor-like impedance behavior, and enhanced electrical conductivity, emphasizing its potential for applications in electrical and energy storage domains.

1 January 2026 in Scientifica
Verified
Journal Article
Open access
PDF file
MKMuhammad Kashif
Muhammad Kashif
TSTalha Sharif
Talha Sharif
SKSalman Khan
Salman Khan
NSNatasha Shahzad
Natasha Shahzad
JAJalal Amir
Jalal Amir
NMNolubabalo Matinise
Nolubabalo Matinise
Molybdenum‐containing nanomaterials, and molybdenum trioxide (MoO 3 ) in particular, have attracted widespread interest due to their complex crystal structures, powerful redox activity, and universal applicability in emerging technologies. This review summarizes recent progress in MoO 3 ‐based material designs, fabrication, and applications. Discussion begins with MoO 3 structure, followed by conventional and unconventional fabrication techniques, including chemical vapor deposition, solvothermal and electrochemical syntheses, and green syntheses. A few leading characterization techniques are introduced with the aim of relating structure to functional performance. The applications of MoO 3 are subsequently critically discussed, covering catalysis and photocatalysis, battery and capacitor storage, electrochromic devices, sensing devices, and biomedical applications. Invariable comparison of such applications with other materials based on established criteria is always addressed with the aim of identifying benefits and shortcomings. Challenges such as long‐term stability, high‐volume fabrication, and interface control are introduced, accompanied by perspectives on future work directions. Overall, this work provides an updated summary of MoO 3 nanomaterials and their increasing applicability in the areas of energy, environments, and biomedical systems.

17 August 2023 in Brazilian Journal of Science
Verified
Journal Article
Open access
PDF file
SZShahid Zaman
Shahid Zaman
MKMuhammad Kashif
Muhammad Kashif
MSMuffarih Shah
Muffarih Shah
AHAbdul Hameed
Abdul Hameed
NMNoor Majeed
Noor Majeed
NKNaqash Khan
Naqash Khan
Excessive exposure of human to organic contaminants from industrial effluents calls for the implementation of effective pollutants removal techniques. This article investigates the photocatalytic degradation of bromophenol blue dye using Strontium oxide nanoparticles co-doped with Nickel and Zinc. Hydrothermal synthesis produced the nanoparticles, which were subsequently characterized using various analytical techniques. UV/Visible revealed absorption peaks at 294 nm, 306 nm, 311 nm, and 318 nm, while FTIR spectroscopy identified stretching peaks at 416 cm-1, 588 cm-1, and 856 cm-1 for Ni-O and Sr-O bonds. The nanoparticles displayed diameters ranging from 30.50 nm to 36.97 nm. EDX analysis confirmed the elemental composition, with Sr and O comprising of approximately 82.02 %, and Ni and Zn approximately 3.21%. Photocatalytic degradation experiments demonstrated that SrO nanoparticles 85.42% degradation efficiency, while co-doped SrO nanoparticles achieved an impressive 97.97% degradation efficiency. This work highlights the potential co-doped SrO nanoparticles as a promising solution for the efficient removal of organic pollutants from the industrial wastewater, addressing environment contamination concerns.

26 July 2026 in Catalysts
Verified
Journal Article
Open access
PDF file
MKMuhammad Kashif
Muhammad Kashif
MGMisbah Gul
Misbah Gul
NSNatasha Shahzad
Natasha Shahzad
HSHao Sun
Hao Sun
Shezan ArefinShezan Arefin
Shezan Arefin
HTHakan Tozan
Hakan Tozan
Metal oxide nanoparticles have been the subject of intense research interest because of their remarkable physicochemical properties, such as their high surface area, particle size tunability, outstanding chemical stability, optical activity, catalytic efficiency, and antimicrobial behavior. These properties make them very useful in environmental, biomedical, energy, sensing, agricultural and industrial applications. The chosen synthesis method is important in controlling the morphology, crystallinity, surface charge, band gap and overall performance of metal oxide nanoparticles. They have been prepared using various physical, chemical and biological means, such as sol–gel, co-precipitation, hydro/solvothermal, microwave-assisted, sonochemical, combustion and green synthesis. Of these, green synthesis is gaining more interest as it employs plant extracts, microorganisms, and other biological materials as reducing agents, stabilizing and capping agents that make the process more eco-friendly and cost-effective. Recent advancements in the synthesis and application of metal oxide nanoparticles are discussed. There is an emphasis on the major synthesis routes, the main factors that influence the formation of nanoparticles, the characterization techniques used, and the structure–property relationships uncovered. A special focus is given to the influence of synthesis parameters, such as the type of precursor and the pH, temperature, reaction time, solvents and capping agents, on the properties of nanoparticles. In addition, the uses of metal oxide nanoparticles in photocatalysis, wastewater treatment, antimicrobial activity, drug delivery, biosensing, energy storage, gas sensing, and agriculture are also included. Finally, present challenges, toxicity issues, the problems of large-scale production, and future research directions are discussed to support the practical and sustainable uses of metal oxide nanoparticles.