Water pollution is a global concern, especially due to iron and manganese, which, at high concentrations, affect water quality by altering taste, odor, and color. This work explores the sustainable synthesis of hydrochar from orange peel and bagasse using hydrothermal carbonization (HTC) and a 23 factorial design to optimize Fe2+ and Mn2+ removal for water treatment polishing. HTC was performed by varying (1) temperature (100–200 °C), (2) residence time (8–14 h), and (3) activation agent (H3PO4 or NaOH), with a central point at 150 °C for 11 h without activation. Characterization was performed using FTIR, TGA, SEM, nitrogen adsorption (BET) for surface area determination, elemental analysis, Brønsted acidity measurements, and zeta potential analysis. The hydrochar synthesized at 100 °C for 14 h with NaOH (HC6) showed the best Fe2+ and Mn2+ removal performance. The equilibrium time was 400 min, with pseudo-first-order kinetics best fitting the Fe2+ adsorption data, while pseudo-second-order kinetics provided the best fit for Mn2+ adsorption. The adsorption process was best described by the Freundlich and Langmuir isotherms, with maximum adsorption capacities (qmax) of 21.44 and 33.67 mg g−1 for Fe2+ and Mn2+, respectively. It can be concluded that HTC-derived hydrochars offer a sustainable and efficient solution for Fe2+ and Mn2+ removal. This strategy presents a potentially valuable approach for sustainable water treatment, offering advantages for industrial application by operating at lower temperatures and eliminating the need for biomass drying, thereby reducing energy consumption and environmental impact.
31 March 2022 in Chemical Engineering Communications
This is the first work to report the removal of an aromatic amine (o-tolidine) from aqueous solutions using a carbon black (Vulcan XC 72 R) as adsorbent. The adsorbent material was characterized using Raman spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and pH at the point of zero charge. The effects of contact time, pH, and initial concentration on o-tolidine adsorption were evaluated. Avrami kinetic model best described the adsorption process. Weber-Morris model showed that the aromatic amine adsorption mechanism is controlled by intraparticle and film diffusion on Vulcan XC 72 R. Temkin isotherm model described equilibrium results, with a maximum adsorption capacity of 64.00 mg g−1 at 25 °C. Thus, the results highlight the applicability of Vulcan XC 72 R as an effective and low-cost adsorbent to decontaminate effluents containing o-tolidine.
1 January 2026 in Journal of the Brazilian Chemical Society
Iron and manganese are important water quality parameters, as their presence can lead to undesirable color and odor. Here, hydrochars (HCs) were synthesized from banana peels via hydrothermal carbonization to produce a sustainable adsorbent for efficient iron and manganese removal from water. A 23 factorial design with a central point was carried out to evaluate the variables: (i) activating agent (H3PO4 or NaOH), (ii) temperature (100 and 200 °C), and (iii) residence time (8 and 14 h). HC9 was performed in water at 150 °C for 11 h. Optimal performance was evaluated from Fe2+ and Mn2+ removal. Fourier transform infrared (FTIR) confirmed functional groups in all HCs, while X-ray diffraction (XRD) broad peaks between 15-30° indicated an amorphous structure. HC9 showed the best performance for the adsorption of both metals. Equilibrium was reached at 200 min, and the kinetic data were best described by the pseudo-second-order model. The adsorption data were best fitted by the Langmuir model for Fe and the Freundlich model for Mn, with maximum adsorption capacities (qmax) values of 33.18 and 19.00 mg g⁻1 for Fe and Mn, respectively. Thus, adsorption using this biochar is a promising and environmentally friendly method for removing those metals from aqueous systems.