Polyvinyl alcohol (PVA)/TiO2/colloidal photonic crystal (CPC) films with photocatalytic properties are presented, where TiO2 nanoparticles were introduced into the PVA gel network. Such PVA/TiO2/CPC films possess three-dimensional periodic structures that are supported with a PVA/TiO2 composite gel. The unique structural color of CPCs can indicate the process of material preparation, adsorption, and desorption. The shift of diffraction peaks of CPCs can be more accurately determined using fiber-optic spectroscopy. The effect of the PVA/TiO2/CPC catalyst films showed better properties as the degradation of methylene blue (MB) by the PVA/TiO2/CPC film catalyst in 4 h was 77~90%, while the degradation of MB by the PVA/TiO2 film was 33% in 4 h, indicating that the photonic crystal structure was 2.3~2.7 times more effective than that of the bulk structure.
Poly(vinyl alcohol) (PVA)/sodium alginate (SA) dual-network hydrogels were prepared via the freeze–thaw method. Tensile testing, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and fiber-optic spectroscopy were employed for material characterization, and multiple metal ions were screened to optimize mechanical properties and ionic conductivity. The results showed that, at PVA:SA mass ratio of 2:1, the hydrogel achieved 163% elongation and 0.18 MPa tensile strength. Ca2+ crosslinking formed an enhanced structure with mechanical properties of 170% elongation and 0.21 MPa strength, and ionic conductivity (0.69 S/m). Combined with colloidal photonic crystal (PC) templates, the PVA/SA-PC film exhibited an inverted opal structure, showing sensitive color response (green to red) and diffraction red-shift toward Ca2+. The conductive film could power a small bulb, demonstrating potential for portable visual sensing applications.