Biological nitrogen removal from wastewater is widely used all over the world on account of high efficiency and relatively low cost. However, nitrogen removal efficiency is not optimized when the organic matter has inadequate effect for the lack of a sufficient carbon source in influent. Although addition of an external carbon source (e.g., methanol and acetic acid) could solve the insufficient carbon source problem, it raises the operating cost of wastewater treatment plants (WWTPs). On the other hand, large amounts of sludge are produced during biological sewage treatment, which contain high concentrations of organic matter. This paper reviews the emerging technologies to obtain an internal organic carbon resource from sewage sludge and their application on improving nitrogen removal of low carbon/nitrogen wastewater of WWTPs. These are methods that could solve the insufficient carbon problem and excess sludge crisis simultaneously. The recovery of nitrogen and phosphorus from treated sludge before recycling as an internal carbon source should also be emphasized, and the energy and time consumed to treat sludge should be reduced in practical application.

Anaerobic ammonium oxidation (ANAMMOX) has emerged as a promising sustainable nitrogen removal technology that offers significant advantages over conventional nitrification–denitrification processes, such as reduced energy consumption, a 60% reduction in oxygen demand, and a 90% reduction in sludge production. However, the practical application of ANAMMOX is hindered by several challenges, including the slow growth of ANAMMOX bacteria, long start-up periods, and high sensitivity to environmental disturbances. Recent studies have highlighted the crucial role of extracellular polymeric substances (EPSs) in the formation, activity, and stability of ANAMMOX biofilms and granules. An EPS is a complex mixture of high-molecular-weight polymers secreted by microorganisms, mainly composed of polysaccharides, proteins, nucleic acids, and lipids. The diverse physicochemical properties and functional groups of EPSs enable them to serve as a structural scaffold, protective barrier, sorption site, electron shuttle, and nutrient source for ANAMMOX bacteria. This review aims to provide an overview of the latest research progress on harnessing the potential of EPSs to enhance the ANAMMOX process. The characteristics, compositions, and extraction methods of ANAMMOX-derived EPSs are summarized. The mechanisms of how EPSs facilitate the enrichment, immobilization, aggregation, and adaptation of ANAMMOX bacteria are elucidated. The strategies and effects of EPS supplementation on improving the performance and robustness of ANAMMOX reactors under various stresses are critically reviewed. The challenges and future perspectives of the EPS-mediated optimization of the ANAMMOX process are also discussed. This review sheds new light on exploiting EPSs as a renewable bioresource to develop more efficient and stable ANAMMOX applications for sustainable wastewater treatment.

Photoreactivation has limited antibiotic resistant bacteria (ARB) and gene (ARG) reduction by ultraviolet (UV) heterogeneous disinfection. ZnO/Al₂O₃ particles where ZnO length ranged around 400 nm was synthesized by template–hydrothermal method. Subsequently particle aided UV system was built to investigate the inhibitions on ARB (Escherichia coli carrying RP4 plasmid) photoreactivation and gene (three ARGs and two mobile genetic elements) recoveries after disinfection. All bacterial inactivation and 5 log gene reduction could be achieved within 5 min and 4 h respectively, and significant inhibitions on bacteria and gene recoveries after photoreactivation were observed, compared with individual UV. Hydroxyl radicals which were responsible for photoreactivation inhibition were detected during ZnO photocatalysis. The pathway of intracellular gene inactivation by extracellular ˙OH was identified as a carpet model. Briefly, ˙OH could destroy membrane, thus intracellular ARGs had accesses to ˙OH and were inactivated. Subsequently the broken areas with negative charge were reclosed via electrostatic attraction due to the limited Zn²⁺ from zinc oxide, but the function of membrane cannot be restored. Our work further provided profound theoretical supports for practical application of antibiotic resistance removal by UV with ZnO aided method in wastewater treatment.

The anammox technology, as an efficient and energy-saving denitrification method, has been widely used in the field of wastewater treatment. Nevertheless, this process faces two key challenges in actual operation, namely the fluctuation of nitrite substrate supply and the residual nitrate, which greatly limits its promotion and application in a wider range. Although the traditional combined process of partial denitrification/anammox (PD/A) can generate nitrite substances, the coexistence of heterotrophic microorganisms and organic carbon sources in the system may have a significant inhibitory effect on the proliferation of Anammox bacteria. The sulfur-oxidizing bacteria (SOB) involved in the sulfur autotrophic denitrification process (SAD) have overlapping ecological niches with Anammox microorganisms and have stable nitrite enrichment characteristics. In view of this, sulfur-oxidizing bacteria are regarded as a potential candidate for combining with the Anammox process. However, the denitrification efficiency of this process is often restricted by the low solubility and poor bioavailability of substrates. At the same time, there are significant research gaps and data deficiencies regarding the key operating parameters for autotrophic short-range denitrification using elemental sulfur to achieve nitrite accumulation and the coupling application of this process with other wastewater treatment technologies. In view of this, this study is committed to comprehensively sorting out and evaluating the existing optimization methods of the elemental sulfur autotrophic denitrification process, while providing an in-depth analysis of its mechanism of action and environmental control factors. At the same time, this study also carried out innovative exploration on the modification process of the sulfur element from the frontier perspective of materials science and pointed out the key directions for subsequent optimization of the construction path of the elemental sulfur autotrophic denitrification system and for improving the denitrification process efficiency. In summary, this study systematically discusses the mechanism of action, practical application, and improvement scheme of PS⁰AD.