Shengchun Liu

Prof. Shengchun Liu

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 February 2016 in Optics Express
Verified
Journal Article
Open access
PDF file
CTChao Tian
Chao Tian
SLShengchun Liu
Shengchun Liu
We propose a simple and robust phase demodulation algorithm for two-shot fringe patterns with random phase shifts. Based on a smoothness assumption, the phase to be recovered is decomposed into a linear combination of finite terms of orthogonal polynomials, and the expansion coefficients and the phase shift are exhaustively searched through global optimization. The technique is insensitive to noise or defects, and is capable of retrieving phase from low fringe-number (less than one) or low-frequency interferograms. It can also cope with interferograms with very small phase shifts. The retrieved phase is continuous and no further phase unwrapping process is required. The method is expected to be promising to process interferograms with regular fringes, which are common in optical shop testing. Computer simulation and experimental results are presented to demonstrate the performance of the algorithm.

20 September 2016 in IEEE Sensors Journal
Verified
Journal Article
Closed access
CTChao Tian
Chao Tian
TFTing Feng
Ting Feng
CWCheng 王成 ) AND Wang
Cheng 王成 ) AND Wang
SLShengchun Liu
Shengchun Liu
QIAN CHENGQIAN CHENG
QIAN CHENG
GXGuan Xu
Guan Xu
Most current photoacoustic imaging (PAI) systems employ piezoelectric transducers to receive photoacoustic signals, which requires coupling medium to facilitate photoacoustic wave propagation and are not favored in many applications. Here, we report an all-optical non-contact PAI system based on a commercial heterodyne interferometer working at 1550 nm. The interferometer remotely detects ultrasound-induced surface vibration and does not involve any physical contact with the sample. The theoretically predicated and experimentally measured noise equivalent detection limits of the optical sensor are about 4.5 and 810 Pa over 1.2 MHz bandwidth. Using a raster-scan PAI system equipped with the non-contact design, stereotactic boundaries of an artificial tumor in a pig brain were accurately delineated. The non-contact design also enables the tomographic PAI of biological tissue samples in a non-invasive manner. The preliminary results and analyses reveal that the heterodyne interferometer-based non-contact PAI system holds good potential in biomedical imaging.

11 February 2016 in Optics Express
Verified
Journal Article
Open access
PDF file
CTChao Tian
Chao Tian
XCXuefeng Chen
Xuefeng Chen
SLShengchun Liu
Shengchun Liu
Wavefront reconstruction in radial shearing interferometry with general aperture shapes is challenging because the problem may be ill-conditioned. Here we propose a Gram-Schmidt orthogonalization method to cope with off-axis wavefront reconstruction with any aperture type. The proposed method constructs a set of orthogonal basis functions and computes the corresponding expansion coefficients, which are converted into another set of expansion coefficients to reproduce the original wavefront. The method can effectively alleviate the ill-conditioning of the problem, and is numerically stable compared with the classic least-squares method, especially for non-circular apertures and in the presence of noise. Computer simulation and experimental results are presented to demonstrate the performance of the algorithm.

24 January 2017 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
XYXiujuan Yu
Xiujuan Yu
XDXue Dong
Xue Dong
XCXuefeng Chen
Xuefeng Chen
CTChao Tian
Chao Tian
SLShengchun Liu
Shengchun Liu
A large-scale multi-longitudinal mode fiber laser sensor array is proposed and demonstrated experimentally based on wavelength/frequency division multiplexing and beat frequency demodulation technique. In the proposed hybrid multiplexing sensing system, the frequency division multiplexing is realized by designing n fiber lasers with different cavity lengths, while the wavelength division multiplexing is achieved by incorporating a 1×m coupler and an m-channel wavelength division demultiplexer. By making the operating wavelength of frequency-multiplexed lasers equal to the central wavelength of each channel in the demultiplexer, the light of each laser is coupled independently to the corresponding channel. Therefore, the multiplexing capability of the multi-longitudinal mode fiber laser sensors is greatly improved and the maximum number of multiplexed sensors is m×n theoretically. To verify the proposed wavelength/ frequency division multiplexing system, a 4×4 multi- longitudinal mode fiber laser sensor array was set up and investigated. Experimental results show that there is a low crosstalk between the adjacent channels. The proposed wavelength/frequency hybrid multiplexing technology has the ability to monitor simultaneously a large number of fiber laser sensors.

5 January 2018 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
XYXiujuan Yu
Xiujuan Yu
XCXuefeng Chen
Xuefeng Chen
JZJintao Zhang
Jintao Zhang
YGYachen Gao
Yachen Gao
SLShengchun Liu
Shengchun Liu
A novel and low-cost fiber birefringence measurement scheme is proposed and studied by a polarimetric fiber ring laser interrogated by beat frequency technique. In the fiber ring laser, modes splitting occur between two orthogonal polarization modes because of intrinsic fiber birefringence. As a result, two types of beat frequency signals (i.e. longitudinal mode beat frequency and polarization mode beat frequency signals) are generated simultaneously. The principle of measurement of fiber birefringence by the fiber ring laser has been analyzed theoretically in detail. Two alternative expressions for fiber birefringence change are obtained, which is very convenient for users to choose different order longitudinal and polarization mode beat frequency signals. The variation of fiber birefringence caused by applied strain has been calculated in terms of beat frequency shift of fiber ring laser. To validate the proposed system, the strain-induced fiber birefringence change in commercial Erbium doped fiber is investigated and obtained by measuring frequency shift of two types of beat frequency signals. The experimental results show that the fiber birefringence experiences a linear decrease when the applied strain is increased. A strain response coefficient of $-1.756\times10^{-11}\mu\epsilon$ is obtained. The proposed sensing scheme has obvious advantages of simple structure, low cost, high sensitivity and it will provide great convenience for measuring the fiber birefringence for short length single mode fiber.mode fiber.

17 July 2015 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
YZYunlong Zhang
Yunlong Zhang
XCXuefeng Chen
Xuefeng Chen
JZJintao Zhang
Jintao Zhang
XYXiujuan Yu
Xiujuan Yu
KLKun Li
Kun Li
SLShengchun Liu
Shengchun Liu
A low-cost and real-time frequency division multiplexing system is proposed based on multi-longitudinal mode fiber laser sensor array and beat signal demodulation technology. The lasers have staggered cavity lengths with corresponding mode spacing. Beat signals of the longitudinal modes of each laser in the array are detected by a common detector. A relationship is worked out between the maximum multiplexing number of the sensors and maximum detectable frequency. A multiplexing array with four laser sensors is investigated experimentally and its potential application for strain measurement is also demonstrated. In the proposed multiplexing system, only one common photodetector and a commercial frequency analyzer are used to monitor all sensors simultaneously, which greatly decreases the cost of the system and makes it more competitive in large-scale monitoring field.