Reduced graphene oxide (rGO) modified transition metal oxide based composites were successfully synthesized via a sol–gel assisted Hummers' method. The present study includes the synthesis of CuCr2O4·0.7TiO2, the synthesis of rGO and the synthesis of rGO modified CuCr2O4·0.7TiO2. In order to synthesize the desired catalyst, rGO and Cu–Cr–O–0.7TiO2 were synthesized individually. The CuCr2O4·0.7TiO2 composite was synthesized via a sol–gel method. Reduced graphene oxide (rGO) used as a modifier in the catalyst, was also synthesized in the laboratory and was calcined at high temperature (1050 °C) to improve its activity. Finally, Cu–Cr–O–0.7TiO2 was modified with 10 wt% rGO. The post synthesis characterizations were performed using various instrumental techniques including X-ray diffraction (XRD) for phase analysis, Fourier transform infrared (FTIR) and Raman spectroscopy for molecular interactions, scanning electron microscopy (SEM) for surface morphology, energy dispersive X-ray analysis (EDX), elemental analysis and X-ray photoelectron spectroscopy (XPS) for binding energy. The catalytic efficiency of the synthesized composite catalyst samples based thermal decomposition of the host material (i.e. AP) was determined by differential thermal analysis (DTA) and thermogravimetric analysis (TGA). The rGO modification into the Cu–Cr–O–0.7TiO2 tri-metallic composition made it the most promising catalyst for the thermal decomposition of AP, due to the tremendously high electrical and thermal conductivity of rGO. Different amounts (2.5, 5.0, 7.5 and 10 wt%) of Cu–Cr–O–0.7TiO2–rGO were added to ammonium perchlorate (AP) to investigate its effect on the thermal decomposition of AP, which is a well known oxidizer used worldwide in the solid composite propellant (SCP) in modern rocketry. The 5 wt% of catalyst (Cu–Cr–O–0.7TiO2–rGO) addition into AP exhibited the remarkably enhanced thermal decomposition of AP. Finally, the burn rate of SCP was examined with 5 wt% catalyst modified AP. The 5 wt% of catalyst modified AP exhibited 175.31% higher burn rate of SCP, compared to the burn rate of pure AP added SCP. Furthermore, when it was compared with an industrial catalyst, i.e. activated copper chromite (ACR), it showed 133.61% higher burn rate of SCP. The SCP exhibited excellent ballistic performance with 0.6% of catalyst in AP, which enhanced the burn rate from 4.866 mm s−1 (for SCP having pure AP) to 8.531 mm s−1 (for SCP having catalyst added AP) and 6.385 mm s−1 (for SCP having industrial catalyst added AP) at 33 bar.
The objective of this present work was to predict the strength distribution of bi-modular cylindrical ceramic specimen from that of another based on Weibull statistical theory. In order to do so, initially, semi-analytical expression for effective volume and effective surface for the cylindrical bar loaded in flexure were derived. In addition, strength scaling ratio from one flexural loading configuration to another with various Weibull modulus was made available. Elaborate experimentation and numerical simulations was carried out to verify the analytical model. Generally, strength scaling for specimen size is dependent on whether the flaws are volume or surface distributed; however, in this study, it was observed that the ratio of strengths from any two configurations, such as three-point flexural to four-point, is independent of whether the flaws are volume or surface distributed when the cross-sectional sizes are the same.
The present study addresses the issues of shifting of elastic axis and elastic surface for strength scaling of bimodular C-ring specimens using a Weibull statistical model. A semianalytical weakest link theory approach has been followed to evaluate the effective volume and effective area with presumed surface and volume distributed scattered flaws in the specimen. Experimentation, semianalytic, and finite element–based numerical procedures have been pursued to iteratively evaluate the Weibull characteristic parameters for typical loading configurations. Significant asymptotic variation in these two parameters has been observed at a low Weibull modulus for a set of change in elastic modulus ratio of tension and compression in contrast to unimodular assumptions. This variation can be ascribed to the significant shifting of neutral surface from the centroidal surface, thereby exhibiting the low level of confidence in designing bimodular structures. Also, the gradients of the curve are very steep, reflecting the uncertainty in strength characteristics as compared to the unimodular case, thus causing changes in the Weibull effective volume and effective surface area. The variation in Weibull effective surface area is less in comparison to the effective volume for unimodular and bimodular thick and thin C-ring specimens. The tabulated results can be used to substitute for a large number of expensive experiments for the design and analysis of bimodular structural components.