Sustainable biofuel production is necessary to meet the daunting challenge of “fueling” growing economies with a significantly reduced carbon footprint. Although its higher oxygen content often hinders the direct conversion of lignocellulosic biomass (LCB) into energy-dense biofuels, microbial biofuel production from LCB still has potential. The production of primary alcohols by acetone–butanol–ethanol (ABE) fermentation has been practiced for more than a century to attain near-theoretical maximum. However, ABE produced conventionally by native microorganisms is not equivalent to fossil fuel-based aviation fuels in terms of energy density, volatility, and cost-efficiency. Various strategies have been adapted for the microbial synthesis of advanced fuels from renewable feedstock with the advancements in genetic engineering. Yet, the presence of inhibitors and the inefficiency of microbes to utilize or transport the sugar mixtures from LCB often impede titer and yield. However, ABE mixtures can act as platform chemicals to synthesize high-value biofuels by biocatalytic or chemo-catalytic applications. Chemical catalysts, in particular, are used to produce higher alcohols ranging from 3-carbon to 20-carbon fuels from the ABE fermentation mixture. This article reviews the recent trends in the production of higher biofuels from ABE mixtures using biological and chemical catalysts. Focus is placed on genomic and metabolic engineering strategies implemented to upgrade microbes for higher biofuel production via the fermentation of renewable feedstocks. This paper also summarizes the advancements in the chemical conversion route of an ABE fermentation mixture into higher biofuels. Finally, the review provides insights into future research toward commercializing renewable and sustainable higher biofuels and chemicals.
Torrefaction is a thermochemical pretreatment in which biomass is heated at 200–300 °C for 30–60 min in an inert atmosphere. Torrefaction has been previously used to improve the fuel properties of lignocellulosic biomass; however, the use of torrefaction for bioenergy generation represents a low-value final product as well as the dead end of the biomass value chain. Herein, we demonstrate the proof-of-concept for the utilisation of torrefaction as a pretreatment to convert low-value wood waste into biosurfactants, a high-value specialty biochemical. Wood waste was torrefied at 225 °C, 250 °C, 275 °C, and 300 °C and physicochemically characterised using proximate and ultimate analyses, FTIR, XRD, TGA–DTG, and SEM–EDX to assess its suitability as fermentation feedstock. Aspen waste torrefied at temperatures less than 250 °C was directly utilised by Burkholderia thailandensis DSM 13276 via semi-solid-state fermentation to yield biosurfactants, and 225 °C was selected for further experiments as it resulted in the production of biosurfactants which reduced the surface tension of the production medium to 36.8 mN/m and had an emulsification index of 64.1%. Tension and emulsification activities decreased with the increase in torrefaction temperature. The biosurfactant derived from torrefaction at 225 °C formed highly stable emulsions with diesel oil (lasting >40 days), in addition to low interfacial tension, suggesting potential applications in diesel bioremediation. This integrated, chemical-free strategy offers an alternative application for torrefied wood waste as well as a feasible solution for the cost-effective chemical-free production of biosurfactants, incorporating circular economy principles.
Torrefaction, a mild thermochemical pretreatment process, generates the fuel-torrefied biomass along with non-condensable and condensable gases. The latter can be condensed to yield a dark, viscous liquid called torrefaction condensate (TC). In this study, we investigated the effect of TC on growth and exopolysaccharide (EPS) production by the green microalgae Chlamydomonas reinhardtii, a well-known model organism. Aspen wood pellets were torrefied at different temperatures, and the condensate formed at each temperature was analyzed. Based on the GC-MS analysis, 225 °C TC was selected and used for the cultivation of C. reinhardtii. Results show that at 2 mL/L and 2.5 mL/L concentrations, TC negatively impacts growth, EPS production, as well as the composition of amino acids, lipids, and fatty acids n of C. reinhardtii. However, C. reinhardtii gradually adapted to TC and attained the growth patterns comparable to the control, showing the resilience of the culture. The biochemical and antioxidant properties of the EPS showed significant differences to that of the control. Therefore, cultivating these microalgae in TC suggests a new microalgal biorefinery approach through the utilization of low-value TC for the production of value-added products, such as EPS.
26 June 2025 in Circular Economy and Sustainability