This work investigates the effects of radiation on FinFET-based full adders, which are crucial components of arithmetic units, particularly in aerospace and space applications. While FinFETs offer significant advantages, they remain susceptible to single-event transients (SETs) induced by radiation, which can cause computational errors. We assess three circuit-level mitigation techniques against SETs in FinFET adders: decoupling cells (DCELLs), transistor sizing (TS), and a combined approach incorporating both methods. Our results demonstrate that the most sensitive nodes and critical vectors in the adders vary depending on the mitigation strategy, underscoring their impact on overall radiation resilience. By analyzing these techniques alongside critical node evaluation, we identify their advantages and limitations, providing insights to enhance the robustness of FinFET-based processors in radiation-prone environments.
Circuits are becoming more susceptible to radiation effects due to technology scaling. This work presents a comparative analysis of radiation sensitivity for different topologies of XOR gates at 16nm. The gates are implemented considering two devices: Complementary Metal-Oxide Semiconductor (CMOS) and Fin Field-Effect Transistor (FinFET) and two logics: Complementary Logic (CMOS logic) and Pass-Transistor Logic (PTL). To allow a more detailed comparison, this work also discusses the delay and power results for each XOR version. XOR gates based on PTL have shown more robustness against radiation effects when compared with the gates implemented with CMOS logic, with a Linear Energy Transfer (LET) threshold being almost 30% higher for CMOS devices and up to 20% greater for FinFET devices. Furthermore, FinFET-based circuits are about three times more robust than CMOS technology, with an improvement on the LET threshold for both logic families evaluated.
This paper presents a comparative analysis of radiation sensitivity and SET mitigation techniques for the Mirror Full Adder topology implemented with FinFET devices at 7 nm node, considering nominal and near-threshold operation. The mitigation techniques investigated are Decoupling Cells and Transistor Sizing. Transistor Sizing may improved robustness up to $2\mathrm{x}$ (nominal) and close to $3\mathrm{x}$ (near-threshold). Combining the techniques decreases the total error occurrence close to 60% at nominal operation and up to 34% at near-threshold operation.