Nikolas Xiros

Prof. Dr. Nikolas Xiros

University of New Orleans, Sch Naval Architecture & Marine Engineering, New Orleans, LA 70148, USA

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2020 in IEEE Journal of Oceanic Engineering
Verified
Journal Article
Closed access
TNTri D. Ngo
Tri D. Ngo
CSCornel Sultan
Cornel Sultan
JVJames H. VanZwieten
James H. VanZwieten
Nikolas XirosNikolas Xiros
Nikolas Xiros
In this article, a new method to control an ocean current turbine (OCT) is examined. The key innovation, inspired by helicopter control, is to use cyclic blade pitch angle variations. Output variance constrained controllers are designed for OCT flight control and their performance is analyzed.

14 May 2020 in Energies
Verified
Journal Article
Open access
PDF file
KTKonstantinos-Marios Tsitsilonis
Konstantinos-Marios Tsitsilonis
Gerasimos THEOTOKATOSGerasimos THEOTOKATOS
Gerasimos THEOTOKATOS
Nikolas XirosNikolas Xiros
Nikolas Xiros
MHMalcolm Habens
Malcolm Habens
The crankshaft dynamics model is of vital importance to a multitude of aspects on engine diagnostics; however, systematic investigations of such models performance (especially for large two-stroke diesel engines that are widely used in the power generation and shipping industries) have not been reported in the literature. This study aims to cover this gap by systematically investigating the parameters that affect the performance of a two-stroke diesel engine crankshaft dynamics model, such as the numerical scheme as well as the engine components inertia and friction. Specifically, the following alternatives are analysed: (a) two optimal performing numerical schemes, in particular, a stiff ordinary differential equations (ODE) solver and a fast solver based on a piecewise Linear Time-Invariant (LTI) scheme method, (b) the linear and the non-linear inertia-speed approaches, and (c) three engine friction submodels of varying complexity. All the potential combinations of the alternatives are investigated, and the crankshaft dynamics model performance is evaluated by employing Key Performance Indicators (KPIs), which consider the results accuracy compared to the measured data, the computational time, and the energy balance error. The results demonstrate that the best performing combination includes the stiff ODE solver, the constant inertia-speed approach and the most simplistic engine friction submodel. However, the LTI numerical scheme is recommended for applications that require fast response due to the significant savings in computational time with an acceptable compromise in the model results accuracy.

Verified
Journal Article
Open access
PDF file
Nikolas XirosNikolas Xiros
Nikolas Xiros
EAErdem Aktosun
Erdem Aktosun
The hydrodynamic forces on an oscillating circular cylinder are predicted using neural networks under flow conditions where Vortex-Induced Vibrations (VIV) are known to occur. The derived neural network approximators are then incorporated in a dynamical model that allows prediction of the cylinder motion given flow conditions and initial conditions. Using experimental data, a minimum-least-squares compensator is tuned that includes linear stiffness and damping su-perimposed with a constant force offset. The compensator is decoupled, i.e., with equations in-dependent for each degree of freedom. By applying the neural network approximators and the derived compensator simulated experiments can be performed. These simulated experiments show that the compensator which cancels the linear components and any bias in the hydrody-namic forces effectively stabilizes the VIV motion. To support this time-domain analysis is per-formed along with phase-plane investigations. Maximum Lyapunov exponent analysis is also shown.

Verified
Journal Article
Open access
PDF file
Nikolas XirosNikolas Xiros
Nikolas Xiros
VTVasileios Tzelepis
Vasileios Tzelepis
ELEleftherios K. Loghis
Eleftherios K. Loghis
A simulation model for a prismatic hard-chine planing hull watercraft (V-shaped keel with constant deadrise) with propulsion based on a 3-phase induction motor connected directly to surface-piercing propeller (SPP) and outfitted with a motor rotational speed controller was investigated, tested, and tuned. The modularity of the model developed enables straightforward substitution of diverse and more refined modules, or even attachment of additional ones to obtain greater level of detail or simulate more complicated processes. Industry trends do suggest an increasing interest in all-electric ship development as well as the use of surface-piercing propellers for small or medium-size craft. All-electric drive plants offer distinct advantages due to their flexibility in arrangements, ability to eliminate reduction gears in many cases, low maintenance requirements and wide range of available sizes as well superb load acceptance and dynamic matching to changing operational conditions. Employing electric drives onboard small craft with planing-hulls that achieve significantly higher velocities where arrangements and maneuverability are of critical design issues is a theme that has received increased attention by designers in recent years. Refined speed regulation and tracking compounded by the feature to produce fairly constant torque across a broad speed (rpm) range enables using of unconventional thrusters such as surface-piercing propellers to small craft. By investigating towing tank test data series for a surface-piercing propeller, development of a numerical simulation tool for unconventional thrusters was demonstrated. The surface-piercing propeller simulation model, as an artificial neural network (ANN), was coupled with a 3-phase induction motor as prime mover as well as dynamic propulsion shaft model and proportional-integral-differential (PID) controller. The various sub-models were finally integrated with a sub-model implementing Savitsky’s propulsion resistance method and calculation of equilibrium trim for planing hull modeling. Simulations were conducted using full-scale real-world conditions for a high-speed small craft developed for leisure and sporting activities, rapid close-range transit, reconnaissance and surveying etc. The planing-hull watercraft considered is amenable to minor hull modifications in order to house a 50 kW electric motor and a four bladed surface-piercing propeller. Simulations performed allowed a full assessment of model functionality as well as level of detail.

13 March 2017 in Journal of Dynamic Systems, Measurement, and Control
Verified
Journal Article
Closed access
PDF file
VTVasileios Tzelepis
Vasileios Tzelepis
JVJames H. VanZwieten
James H. VanZwieten
Nikolas XirosNikolas Xiros
Nikolas Xiros
CSCornel Sultan
Cornel Sultan
Electricity generation from moving currents without using dams (i.e., in-stream hydrokinetic electricity) has the potential to introduce multiple GW of renewable power to U.S. grids. This study evaluates a control system designed to regulate the generator rotor rate (rpm) to improve power production from in-stream hydrokinetic turbines. The control algorithm is evaluated using numerical models of both a rigidly mounted tidal turbine (TT) and a moored ocean current turbine (OCT) coupled to an induction electric machine model. The moored simulation utilizes an innovative approach for coupling a multiple degrees-of-freedom (DOF) nonlinear hydrodynamic/mechanical turbine model with a nonlinear electromechanical generator model. Based on the turbine torque-speed characteristic, as well as the asynchronous machine features, a proportional–integral (PI) controller is used to generate a correction term for the frequency of the three-phase sinusoidal voltages that are supplied to the asynchronous generator. The speed control of the induction generator through the supply frequency is accomplished by a simplified voltage source inverter (VSI). The simplified VSI consists of control voltage sources (CVSs), while the comparison with a real VSI using diodes and transistors, which are controlled by pulse width modulation (PWM) technique, is also presented. Simulations are used to evaluate the developed algorithms showing that rpm fluctuations are around 0.02 for a tidal turbine operating in a wave field with a 6 m significant wave height and around 0.005 for a moored ocean current turbine operating in a wave field with a 2 m significant wave height.

13 October 2021 in Sensors
Verified
Journal Article
Open access
PDF file
GTGeorgios Tsakyridis
Georgios Tsakyridis
Nikolas XirosNikolas Xiros
Nikolas Xiros
A linear mechanical oscillator is non-linearly coupled with an electromagnet and its driving circuit through a magnetic field. The resulting non-linear dynamics are investigated using magnetic circuit approximations without major loss of accuracy and in the interest of brevity. Different computational approaches to simulate the setup in terms of dynamical system response and design parameters optimization are pursued. A current source operating in baseband without modulation directly feeds the electromagnet, which consists commonly of a solenoid and a horseshoe-shaped core. The electromagnet is then magnetically coupled to a mass made of soft magnetic material and attached to a spring with damping. The non-linear system is described by a linearized steady-space representation while is examined for controllability and observability. A controller using a pole placement approach is built to stabilize the element. Drawing upon the fact that coupling works both ways, enabling estimation of the mass position and velocity (state variables) by processing the induced voltage across the electromagnet, a state observer is constructed. Accurate and fast tracking of the state variables, along with the possibility of driving more than one module from the same source using modulation, proves the applicability of the electro-magneto-mechanical transducer for sensor applications. Next, a three-layer feed-forward artificial neural network (ANN) system equivalent was trained using the non-linear plant-linear controller-linear observer configuration. Simulations to investigate the robustness of the system with respect to different equilibrium points and input currents were carried out. The ANN proved robust with respect to position accuracy.