Flexible electronics is an applicative field in continuous expansion. This article addresses the requirements of this domain regarding eco-friendly and flexible components from a renewable chitosan polysaccharide that is progressively reinforced with barium titanate nanoparticles. Ultrafine ceramic powder was produced by the coprecipitation method, and the resulting phase composition and morphology were investigated by X-ray diffraction and transmission electron microscopy, together with the perovskite structure of the spherical nanoparticles. FTIR studies were conducted to elucidate the interactions between the two constituting phases of the composites. The filler dispersion in the matrix was checked by scanning electron microscopy. The rheological percolation threshold was compared with that extracted from electrical measurements. The thermal behavior was assessed by thermogravimetry and differential scanning calorimetry. The dielectric properties as a function of frequency and applied electric field were investigated, and the results are discussed in terms of extrinsic contributions. The current results demonstrate a straightforward method for producing tunable flexible structures.
This work aimed to advance the knowledge in the field of eco-friendly dielectrics with applicative relevance for future energy-related technologies. New multicomponent composites were prepared by using a cellulose ether/citric acid mixture as the matrix, which was gradually filled with strontium titanate nanoparticles (5–20 wt%). In this case, citric acid can act as a crosslinking agent for the polymer but also can react differently with the other counterparts from the composite as a function of the solvent used (H2O and H2O2). This led to considerable differences in the morphological, thermal, optical, and electrical characteristics due to distinct solvent-driven interactions, as revealed by the infrared spectroscopy investigation. Hence, in contrast to H2O, the oxidizing activity of H2O2 led to changes in the surface morphology, a greater transparency, a greater yellowness, an enhanced refractive index, and higher permittivity. These data provide new pathways to advance the optical and dielectric behavior of eco-compatible materials for energy devices by the careful selection of the composite’s components and the modulation of the molecular interactions via solvent features.