High-silica–alumina coal gangue is rich in kaolinite, quartz, and other mineral components. The potential for resource utilization is huge, but the silica–aluminate structure is highly stable, and it is difficult to achieve efficient dissociation and elemental enrichment using traditional extraction processes. This study selects typical high-silica–alumina coal gangue as the research object and systematically studies the rules of the physical phase transformation mechanism and ion migration behavior in the activation process of the sodium-based additives stage. In addition, a graded leaching and separation processing route is established, realizing the effective separation and extraction of silica–alumina. The key parameters were optimized using response surface methodology (RSM), obtaining the optimal activation conditions of 800 °C, 30 min, and an additives ratio of 0.8. Under these conditions, the highest dissolution rates of silica and alumina are 82.1% and 92.36%, respectively. Characterization techniques such as XRD, FTIR, and SEM reveal that the activation mechanism of coal gangue involves the decomposition of the aluminosilicate framework and the erosion of sodium ions. At the same time, the chemical bonding reorganization contributes to forming water-soluble sodium silicate (Na2SiO3) and insoluble nepheline (NaAlSiO4), which significantly promotes the release of Si and Al. When the activation temperature is too high, the nepheline phase is transformed into amorphous glassy sodium aluminate and precipitated on the surface, which gradually encapsulates the sodium silicate. This encapsulation restricts dissolution pathways, thereby leading to system densification. Moreover, enhanced resistance to acid attack leads to a decrease in the dissolution rates of Si and Al. This study elucidates the mineral phase reconstruction and element migration mechanisms involved in sodium-based activation and presents a viable approach for the high-value utilization of coal gangue.
Coal gangue is a typical coal-based solid waste and its efficient utilization is of great importance for waste minimization and resource recovery. In this study, the thermal behavior, kinetic characteristics, and aluminum leaching performance of four representative coal gangue samples (XJ-1, SX-1, NX-1, and IM-1) were systematically investigated. TG–DTG analysis revealed that the decomposition process can be divided into five stages, with major mass losses occurring during organic pyrolysis and kaolinite dehydroxylation. The apparent activation energies calculated from the three isoconversional methods (FWO, KAS, and Starink) were highly consistent, with correlation coefficients (R 2) mostly above 0.95. XJ-1 and SX-1 exhibited higher E a values that increased with conversion, indicating a “difficult-to-activate” type, whereas NX-1 and IM-1 showed significant decreases in E a within the main decomposition region, corresponding to an “easy-to-activate” type. Acid leaching experiments further confirmed that NX-1 and IM-1 achieved the highest aluminum leaching efficiencies (>59%) after calcination at 750–800 °C, while XJ-1 and SX-1 remained below 50% even under optimum conditions. All samples exhibited reduced leachability at 850 °C due to recrystallization. Complementary structural and phase analyses supported these findings. Overall, this study establishes a clear structure–phase–reactivity relationship and classifies coal gangue into easy-to-activate and difficult-to-activate types, providing theoretical guidance for its classified utilization and process optimization of acid leaching.
Complex mineral associations in coal gangue inhibit mineral liberation and downstream utilization. This study employed automated mineralogy to measure the mineral composition, particle size distribution, intergrowth, and liberation for four size fractions obtained after a single grinding step (−80 + 150, −150 + 200, −200 + 400, and −400 mesh). Carnauba wax embedding was used to enhance the backscattered electron contrast between carbonaceous matter and the embedding medium. Kaolinite was preferred in the highest fraction, with Al2O3 and ash contents reaching 19.99% and 72.05%, respectively, and carbonaceous matter remaining relatively coarse. Carbonaceous matter exhibited the highest liberation degree (84.91%), followed by kaolinite (69.64%) and quartz (67.08%), and pyrite had a lower liberation degree of 51.40%. Unliberated pyrite consisted of 26.02% carbonaceous matter and 11.72% kaolinite. Fine inclusions and complex mineral intergrowths restricted further liberation by grinding alone. These results reveal mineral-specific size redistribution and liberation behavior, and provide a quantitative basis for size-selective separation and for avoiding unnecessary overgrinding in coal gangue processing.