Waste crude glycerol was successfully enriched and utilized as an inexpensive source for producing value-added chemicals, such as glycerol carbonate (GC) – a valuable compound with extensive industrial applications. The Li/MCM-41 heterogeneous catalyst was synthesized and used for the transesterification of enriched glycerol and dimethyl carbonate (DMC) to produce GC. The catalyst's physicochemical properties were characterized using thermogravimetric, Hammett indicator, inductively coupled plasma-optical emission spectroscopy, nitrogen adsorption–desorption, X-ray diffractometry, scanning electron microscopy, and Fourier-transform infrared spectroscopy analyses. Reaction conditions were optimized using response surface methodology and analysis of variance, yielding an accurate quadratic model to predict the GC yield under different transesterification variables. The results revealed that 5%Li/MCM-41 served as the optimal catalyst, achieving the highest TOF of 4.72 h−1. The DMC: enriched glycerol molar ratio had the greatest impact on the GC yield, with an R2 = 0.9743 and adjusted R2 = 0.9502. The optimal GC yield (58.77%) with a final purity of 78% was attained at a 5.15 wt% catalyst loading relative to the initial amount of enriched glycerol, DMC: enriched glycerol molar ratio of 4.24 : 1, and a reaction temperature of 86 °C for 165 min. The 5%Li/MCM-41 heterogeneous catalyst could be reused for four cycles with a decreased GC yield from 58.77% to 45.72%. Thus, the Li/MCM-41 catalyst demonstrated a remarkable efficiency and potential as a heterogeneous catalyst for synthesizing GC. This method not only contributes to environmental sustainability by making use of a byproduct from biodiesel production but also aligns with the principles of a circular economy.
The impeller configuration significantly influences on the hydrodynamics and mixing performance. The optimum design is the Ruston turbine with six blades set at 45 angle. The Norwood and Metzner scaling criteria is reliable to scale up of natural latex containing high silica content stirred tank.
1 January 2025 in International Journal of Chemical Engineering
In the process of biodiesel production, a significant amount of glycerol, a by‐product, is generated. This glycerol needs to be removed to purify biodiesel. Hydrocyclones have been developed for the efficient separation of immiscible liquid–liquid systems. However, the performance of hydrocyclones operating with high levels of liquid impurities requires further investigation. This research aims to examine the impact of hydrocyclone geometry on the efficiency of glycerol separation from biodiesel. Two types of hydrocyclones, short‐tail and long‐tail, were studied. A computational fluid dynamics (CFD) model, based on the Eulerian–Eulerian two‐fluid model was used to predict the flow behavior within the system. Detailed hydrodynamic behavior in both short‐tail and long‐tail hydrocyclones was analyzed. Separation efficiency and biodiesel purity increased with a decrease in the glycerol volume fraction in the feed, an increase in inlet velocity, or an increase in glycerol density. However, these operating conditions had a minimal effect on the flow ratio. The short‐tail hydrocyclone exhibited higher separation efficiency and biodiesel purity compared to the long‐tail hydrocyclone, although its flow ratio was considerably lower. Therefore, the effect of long‐tail hydrocyclone geometry on biodiesel purification was further investigated. It was found that separation efficiency and biodiesel purity improved with an increase in the underflow outlet diameter or a decrease in the overflow outlet diameter. However, these changes had the opposite effect on the flow ratio. Additionally, the optimum configuration of the long‐tail hydrocyclone was obtained.
The modified scaling law based on the similitude method for a catalytic cracking downer reactor was proposed for various reactor scales. An excellent similarity of chemical performance of complex catalytic cracking was obtained.
Stirred tanks are prevalent in various industries, including chemical, biochemical, and pharmaceutical industries. These reactors are suitable for ensuring efficient mass and heat transfer because adequate mixing can be achieved. Numerous studies have been conducted on small-scale stirred-tank reactors. However, upscaling such reactors is challenging because of the complex flow behavior inside the system, especially for the mixing of immiscible liquid–liquid systems. Thus, the objectives of this study were to examine the flow behavior and upscale an immiscible liquid–liquid stirred tank using CFD simulation by investigating a flat-bottomed stirred tank reactor, equipped with a six-blade Rushton turbine. The simulated results were in good agreement with those obtained experimentally. The scale of the reactor significantly affects the hydrodynamic behavior, and the uniformity of the radial distribution of the velocity decreases with increasing Reynolds number. Furthermore, the upscaling criteria were evaluated for geometric similarity and equal mixing times. The proposed scaling law reliably scaled up the immiscible liquid–liquid mixing in a stirred tank with a difference in the range of ±10%.