Studies show that the applied torque and load on the worktable of a dual-turntable five-axis machine tool continuously change during the machining process. These variations generate vibration in the worktable along the axial direction, thereby reducing the machining accuracy. In order to improve the machining accuracy of the machine tool and the dynamic characteristics of the worktable, this paper first established the nonlinear dynamic equation of the axial vibration of the machine tool table when the worktable is subjected to torque, swing moment, and load according to the elasticity of the plate and shell, then according to Galerkin, the truncation method solves the dynamic displacement in the axial direction of the worktable, as well as the bifurcation diagram, displacement waveform diagram, phase plane trajectory, and Poincarn method solvon diagram of the processing system. Finally, the influence of different parameters, including torque, swing moment, and load on axial vibration of the worktable was analyzed during the tool operation. The obtained results reveal that as the external load changes, the corresponding axial vibration of the worktable is mainly in the state of large periodic motion, where the maximum vibration amplitude reaches 0.09 mm, and the external load has the greatest influence on the axial vibration of the worktable. Moreover, the axial vibration of the worktable is affected by the swing moment. More specifically, in the chaotic state of a small period and small area, the maximum vibration amplitude reaches 0.03 mm, and the swing moment has a negligible effect on the axial vibration of the worktable. The influence of torque and load on the vibration characteristics of the five-axis machine tool table during machining was studied through experiments. The obtained results demonstrate that nonlinear analysis of the table axial vibration of the five-axis machine tool with dual turntables is an effective way to control the stability of the worktable during the processing of the workpiece.
Numerical integration on spheres, including the computation of the areas of spherical triangles, is a core computation in geomathematics. The commonly used techniques sometimes suffer from instabilities and significant loss of accuracy. We describe a new algorithm, called ARPIST, for accurate and stable integration of functions on spherical triangles. ARPIST is based on an easy-to-implement transformation to the spherical triangle from its corresponding linear triangle via radial projection to achieve high accuracy and efficiency. More importantly, ARPIST overcomes potential instabilities in computing the Jacobian of the transformation, even for poorly shaped triangles that may occur at poles in regular longitude-latitude meshes, by avoiding potential catastrophic rounding errors. We compare our proposed technique with L'Huilier's Theorem for computing the area of spherical triangles, and also compare it with the recently developed LSQST method (J. Beckmann, H.N. Mhaskar, and J. Prestin, GEM - Int. J. Geomath., 5:143-162, 2014) and a radial-basis-function-based technique (J. A. Reeger and B. Fornberg, Stud. Appl. Math., 137:174-188, 2015) for integration of smooth functions on spherical triangulations. Our results show that ARPIST enables superior accuracy and stability over previous methods while being orders of magnitude faster and significantly easier to implement.
The accurate reconstruction of piecewise continuous functions on meshes is challenging due to potential spurious oscillations—namely the Gibbs phenomenon—especially for high-order methods. This paper introduces the Robust Discontinuity Indicators (RDI) method, a novel technique for constructing discontinuity indicators. These indicators can effectively identify both and discontinuities in a single pass using a new comprehensive theoretical analysis combined with cell-based overshoot–undershoot indicators and node-based oscillation indicators. In addition to detecting discontinuities, these indicator values can also facilitate the construction of adaptive weighting schemes to mitigate the Gibbs phenomenon. Due to its flexibility, RDI can accommodate complex geometries and applies to nonuniform unstructured meshes and general surfaces, broadening its utility. Through experiments, we show that RDI can accurately capture discontinuities while producing fewer false positives than two-pass methods. By providing a more rigorous method for discontinuity detection, RDI has the potential to offer significant improvements in computational simulations and data remapping.