Despite the various techniques developed for the transfer of large area graphene grown by chemical vapor deposition (CVD), the conventional polymethylmethacrylate (PMMA) transferring technique has been widely applied in laboratories due to its convenience and economical cost. However, the complete removal of PMMA on graphene surface has become a troublesome, and the PMMA residue could degrade the properties of graphene significantly. We report here a facile water assisted technique to directly peel off the PMMA layer over centimeter-sized CVD graphene film for the first time. No organic solvents are involved in the whole transfer process. The transferred graphene film is clean and intact over large area because of the cooperative effect of the capillary force and the van der Waals force which facilitates the conformal contact between graphene film and the substrate. Various types of graphene samples (i.e. monolayer, multilayer, and incomplete domains) can be easily transferred to diverse substrates including silicon wafer, sapphire, and quartz with good integrity. The transferred graphene film is of high cleanliness, and the graphene transistors show higher carrier mobility and lower level of p-type doping comparing to the conventional wet transfer technique.
Direct chemical vapor deposition (CVD) growth of hexagonal boron nitride (h-BN) on insulating substrates offers a promising pathway to circumvent transfer-induced defects and enhance device integration. This comprehensive review systematically evaluates recent advances in CVD techniques for h-BN synthesis on insulating substrates, including metal–organic CVD (MOCVD), low-pressure CVD (LPCVD), atmospheric-pressure CVD (APCVD), and plasma-enhanced CVD (PECVD). Key challenges, including precursor selection, high-temperature processing, achieving single-crystalline films, and maintaining phase purity, are critically analyzed. Special emphasis is placed on comparative performance metrics across different growth methodologies. Furthermore, crucial research directions for future development in this field are outlined. This review aims to serve as a reference for advancing h-BN synthesis toward practical applications in next-generation electronic and optoelectronic devices.
Anomalous Hall effect (AHE) in MgO/CoFeB/X/Ta/MgO (X: Mg or Ru) multilayers by interfacial modification was reported. AHE behavior can be effectively tuned with the different insertion. For example, the anomalous Hall resistivity (ρAH) value increases by 23% with 0.4 nm Mg insertion. Whereas, the ρAH value decreases by 7.5% with 0.4 nm Ru insertion. Interfacial structural results from X-ray photoelectron spectroscopy (XPS) shows various interfacial oxygen migration can be induced by the different insertion, leading to the opposite contribution to AHE in multilayers structure. This study will provide an effective way to tune the properties of the AHE-based devices.