A large amount of mine water is generated during coal production, which not only damages the surface environment and ecology but also wastes groundwater resources in the mining area, exacerbating regional water scarcity. In this work, a novel zero liquid discharge technology combining selectrodialysis (SED) and bipolar membrane electrodialysis (BMED) was developed for the resourceful treatment of low-salinity mineralized wastewater. The SED stack had demonstrated to be workable for the elimination of multivalent ions. The BMED stack converts brine into acid and base. After SED, a high pure crude salt (~98%) was attained. Furthermore, under the conditions of a current density of 20 mA/cm², a flow velocity of 20 L/h, and an initial acid/base concentration of 0.10 mol/L, the maximum concentrations of acid and base were found to be 0.75 mol/L and 0.765 mol/L, respectively, for a feed conductivity of 55 mS/cm. The cost of the entire electrodialysis stage was evaluated to be USD 1.38/kg of NaOH. Therefore, this combined UF-RO-SED-BMED process may be an effective strategy for the sustainable treatment of low-salinity mineralized wastewater.

The removal of high-concentration m-cresol from industrial wastewater remains a significant challenge due to its toxicity and persistence. In this study, a commercially available functionalized resin with a high BET surface area (1439 m² g⁻¹) and hierarchical pore structure was employed for the adsorption of pure m-cresol at an initial concentration of 20 g L⁻¹, representative of coal-based industrial effluents. Comprehensive characterization confirmed the presence of oxygen-rich functional groups, amorphous polymeric structure, and uniform surface morphology conducive to adsorption. Batch experiments were conducted to evaluate the effects of resin dosage, contact time, temperature, and equilibrium concentration. Under optimized conditions (0.15 g resin, 60 °C), a maximum adsorption capacity of 556.3 mg g⁻¹ and removal efficiency of 71% were achieved. Kinetic analysis revealed that the pseudo-second-order model best described the adsorption process (R² > 0.99). Isotherm data fit the Langmuir model most closely (R² = 0.9953), yielding a monolayer capacity of 833.3 mg g⁻¹. Thermodynamic analysis showed that adsorption was spontaneous (ΔG° < 0), endothermic (ΔH° = 7.553 kJ mol⁻¹), and accompanied by increased entropy (ΔS° = 29.90 J mol⁻¹ K⁻¹). The good agreement with the PSO model is indicative of chemisorption, as supported by other lines of evidence, including thermodynamic parameters (e.g., positive ΔH° and ΔS°), surface functional group characteristics, and molecular interactions. The adsorption mechanism was elucidated through comprehensive modeling of adsorption kinetics, isotherms, and thermodynamics, combined with detailed physicochemical characterization of the resin prior to adsorption, reinforcing the mechanistic understanding of m-cresol–resin interactions.

The sensory quality and health benefits of Pu-erh tea are mainly determined by microbial fermentation processing. The directed exogenous inoculation of specific microorganisms is an effective method to improve the quality and flavor of Pu-erh tea. In this study, Lactobacillus plantarum and Saccharomyces cerevisiae were introduced into the fermentation processes of Pu-erh tea, as they are the main contributors to enzyme secretion, to change the tea’s functional components. The raw tea materials, spontaneous fermentation tea and microbiological fermentation tea were analyzed by microbiomics and metabolomics. A total of 248 metabolites were characterized, 71 of which were identified as essential metabolites involved in the metabolic changes. These essential metabolites were produced by specific dominant microbial species with multivariate analysis methods. Metabolites essential to the sensory quality and health benefits of Pu-erh tea, such as flavonoids and free amino acids, were increased in tea samples inoculated with Lactobacillus plantarum and Saccharomyces cerevisiae following fermentation. Fungal diversity decreased after fermentation, and both the diversity and richness of bacteria were significantly decreased. In conclusion, our results demonstrate the advantages of Lactobacillus plantarum and Saccharomyces cerevisiae in forming the unique sensory characteristics of Pu-erh tea, and they indicate that the microbial composition is a key factor in altering the tea’s metabolic profile. Our work establishes a theoretical foundation for the promotion of the safety and quality of Pu-erh tea through exogenous inoculation with Lactobacillus plantarum and Saccharomyces cerevisiae.

Heavy metal ions such as cadmium, mercury, lead, and arsenic in the soil cannot be degraded naturally and are absorbed by crops, leading to accumulation in agricultural products, which poses a serious threat to human health. Therefore, establishing a rapid and efficient method for detecting heavy metal ions in agricultural products is of great significance to ensuring the health and safety. In this study, a novel optimized spectrometric method was developed for the rapid and specific colorimetric detection of cadmium ions based on N-(2-Acetamido)-iminodiacetic acid (ADA) and Victoria blue B (VBB) as the chromogenic unit. The safety evaluation of ADA showed extremely low biological toxicity in cultured cells and live animals. The standard curve is y = 0.0212x + 0.1723, R² = 0.9978, and LOD = 0.08 μM (0.018 mg/kg). The liner concentrations detection range of cadmium is 0.1–10 μM. An inexpensive paper strip detection method was developed with a detection limit of 0.2 μM to the naked eye and a detection time of less than 1 min. The method was successfully used to assess the cadmium content of rice, soybean, milk, grape, peach, and cabbage, and the results correlated well with those determined by inductively coupled plasma–mass spectrometry (ICP-MS). Thus, our study demonstrated a novel rapid, safe, and economical method for onsite, real-time detection of cadmium ions in agricultural products.

Semi-coking wastewater generated during coal pyrolysis contains extremely high concentrations of refractory organic pollutants, resulting in elevated chemical oxygen demand (COD) and posing significant environmental risks, making efficient COD removal a critical challenge for sustainable wastewater treatment in the coal chemical industry. In this study, a porous carbon-based resin (XDA-1G) was investigated as an adsorbent for COD removal from semi-coking wastewater. The adsorption performance and underlying mechanisms were systematically evaluated through adsorption isotherm, kinetic, and thermodynamic analyses, combined with structural characterization using FTIR, XPS, BET, XRD, and SEM–EDS. The resin exhibited a high COD removal efficiency of up to 91% with a maximum adsorption capacity of 2182 mg g⁻¹. Kinetic analysis followed the pseudo-second-order model, while the Freundlich isotherm best described the equilibrium behavior, indicating heterogeneous adsorption. Thermodynamic parameters confirmed that the adsorption process is spontaneous and endothermic. Spectroscopic and structural analyses revealed that COD removal is mainly governed by synergistic mechanisms including π–π interactions between aromatic pollutants and the carbon framework, hydrogen bonding with oxygen-containing functional groups, and pore filling within the hierarchical porous structure. These findings demonstrate the strong potential of porous carbon-based resins as efficient adsorbents for treating high-strength industrial wastewater.