It is common knowledge that the presence of trace metals in biofuels can be detrimental to the environment and long-term sustainable development. This study provides an insight into selective catalytic preparation of biofuel to compare uptake of trace metals in the biodiesel fraction with preferential base catalysts. The role of specific metal hydroxides in controlling trace metal content in biofuel production is relatively unexplored, and the effect of different homogeneous catalysts (NaOH, KOH) on metal retention in biodiesel from commercial neem oil was examined.A detailed study of this nature of catalyst vs. metal uptake is in the interest of sustainable living and could make a significant contribution to biofuels research. Both catalysts displayed variable uptake for certain toxic elements, which was attributed to the behavior of the catalyst in the reaction mixture. A general comparison reflected specific trends in metal retention (ICP-MS) with the use of different base catalysts. Challenges encountered by extending the study and using a heterogeneous catalyst (CaO) are presented. Our work could play a significant role in influencing catalyzed transesterfication processes to control elemental and toxic metal uptake in biofuels. The impact of our work on sustainable living is presented.
Neem biodiesel is currently being explored as a future biofuel and was extracted chemically from the vegetable oil. Many of its properties are still under investigation and our aim was to study its noxious-gas emission profiles from blends with regular petroleum diesel. The distinct advantage of a real-time study is acquisition of in situ data on the combustion behavior of gas components with actual progression of time. Mixtures of neem biodiesel and petroleum diesel corresponding to neem additives of 5%, 10%, 15% and 25% were tested for combustion efficiency and emitted gases using a high-performance gas analyzer. Our study, therefore, investigated the overall efficiency of the combustion process linked to emissions of the following gases: O2, CO2, NO, NOx and SO2. The results for the 95/5% blend compared to the neat sample were most promising and showed no serious change in performance efficiency (<2%). NO/NOx emission trends displayed maxima/minima, suggestive of interconvertible chemical reactivity. Declining CO and SO2 emissions were consistent with rapid chemical conversion. The CO and SO2 concentrations fell well below the toxic atmospheric limits in less than 300 s. The results are generally encouraging for blends below 10%. The potential environmental impact of the study is discussed.
Hands-on laboratory skills play a vital role in providing mechanical engineering students with a sound understanding of the scientific fundamentals and their application in solving real-life engineering problems. This paper describes a hands-on laboratory thermofluid project which is taught as part of a one-semester, junior-level mechanical engineering course titled Core Measurements Laboratory. The experiment focuses on characterization of heat transfer from a cartridge-heated, isothermal cylinder inside a circular enclosure, by conduction, natural convection and radiation. The project consists in the design and fabrication of the test facility, data acquisition and comparison of experimental results with analytical predictions, with a formal report submitted on completion. The project is undertaken by a team of four students over a five-week period. Emphasis is placed on highlighting potential discrepancies between measurement and analytical predictions, which are inherent in the test configuration considered, reflecting realistic engineering situations. Sample measurement and analysis results are reported. The teaching strategy employed to integrate fundamental theories with hands-on experiences is described. The effectiveness of the laboratory project in enhancing student learning of heat transfer, engineering analysis of discrepancies between predictions and measurements, and project management skills was demonstrated by monitoring student performance improvements over the duration of the project.