Sławomir Żak

Dr. Sławomir Żak

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 March 2024 in Membranes
Verified
Journal Article
Open access
PDF file
WTWirginia Tomczak
Wirginia Tomczak
Marek GrytaMarek Gryta
Marek Gryta
MDMonika Daniluk
Monika Daniluk
SŻSławomir Żak
Sławomir Żak
In recent years, the use of biogas as a natural gas substitute has gained great attention. Typically, in addition to methane (CH4), biogas contains carbon dioxide (CO2), as well as small amounts of impurities, e.g., hydrogen sulfide (H2S), nitrogen (N2), oxygen (O2) and volatile organic compounds (VOCs). One of the latest trends in biogas purification is the application of membrane processes. However, literature reports are ambiguous regarding the specific requirement for biogas pretreatment prior to its upgrading using membranes. Therefore, the main aim of the present study was to comprehensively examine and discuss the most recent achievements in the use of single-membrane separation units for biogas upgrading. Performing a literature review allowed to indicate that, in recent years, considerable progress has been made on the use of polymeric membranes for this purpose. For instance, it has been documented that the application of thin-film composite (TFC) membranes with a swollen polyamide (PA) layer ensures the successful upgrading of raw biogas and eliminates the need for its pretreatment. The importance of the performed literature review is the inference drawn that biogas enrichment performed in a single step allows to obtain upgraded biogas that could be employed for household uses. Nevertheless, this solution may not be sufficient for obtaining high-purity gas at high recovery efficiency. Hence, in order to obtain biogas that could be used for applications designed for natural gas, a membrane cascade may be required. Moreover, it has been documented that a significant number of experimental studies have been focused on the upgrading of synthetic biogas; meanwhile, the data on the raw biogas are very limited. In addition, it has been noted that, although ceramic membranes demonstrate several advantages, experimental studies on their applications in single-membrane systems have been neglected. Summarizing the literature data, it can be concluded that, in order to thoroughly evaluate the presented issue, the long-term experimental studies on the upgrading of raw biogas with the use of polymeric and ceramic membranes in pilot-scale systems are required. The presented literature review has practical implications as it would be beneficial in supporting the development of membrane processes used for biogas upgrading.

30 September 2010 in Journal of Environmental Engineering and Landscape Management
Verified
Journal Article
Open access
TRTeresa Rauckyte
Teresa Rauckyte
SŻSławomir Żak
Sławomir Żak
ZPZenon Pawlak
Zenon Pawlak
AOAdekunle Oloyede
Adekunle Oloyede
This paper describes a case study of petroleum‐contaminated soil/sediment samples which were analyzed using gas chromatography‐flame ionization detector (GC‐FID) for total petroleum hydrocarbons (TPH), volatile aromatic com‐pounds: benzene, toluene, ethylbenzene, and xylenes (BTEX) and naphthalene by GC‐MS, and oil and grease (O/G) con‐tent by sonication in hexane. The ratio of (TPH) / (O/G) shows that the hydrocarbon fraction is between 7% and 87%. The content of volatile organic fraction BTEX accounts for only a small proportion of total TPH, and the ratio of (BTEX) / (TPH) ranges from 0.1% to 0.6%. It should be stressed that the use of TPH methods as against gas chromatography must be done with care because the potential risk posed by BTEX compounds may not be adequately addressed. Santrauka Aprašomi nafta užterštu dirvožemio bei dumblo pavyzdžiai, kuriuose duju chromatografijos būdu GC‐FIDnustatytas bendrasis naftos angliavandeniliu kiekis (TPH), o GC‐MS – lakieji aromatiniai junginiai: benzenas, toluenas, etilbenzenas ir ksilenai (BTEX) bei naftalenas. Sonifikacijos n‐heksane būdu nustatytas alieju ir riebalu (O/G) kiekis. TPH ir O/G santykis rodo, kad angliavandeniliu frakcijos yra nuo 7% iki 87%. Lakioji organine frakcija (BTEX) sudaro palyginti maža bendrojo naftos angliavandeniliu kiekio (TPH) dali, o BTEX ir TPH santykis svyruoja nuo 0,1% iki 0,6%. Ypač vertetu atkreipti demesi i bendrojo naftos angliavandeniliu kiekio (TPH) nustatyma duju chromatografijos būdu, nes galimas lakiosios organines frakcijos (BTEX) pavojingumas gali būti nepakankamai ivertintas. Peзюме Описаны образцы почвы и седимента, в которых способом хроматографии газа GC-FID определено общее количество нефтяных углеводородов (TPH), при помощи GC-MS установлены летучие ароматические соединения: бензол, толуол, этилобензол, ксилолы (BTEX) и нафталин. Способом сонификации в н-гексане определено количество масел и жиров (O/G). Отношение (TPH) / (O/G) свидетельствует о том, что в них содержится от 7% до 87% фракции углеводородов. Летучие ароматические соединения составляют относительно небольшую часть cyммарных нефтяных углеводородов, а отношение (BTEX) / (TPH) колеблется в пределах 0,1–0,6%. Особое внимание следует обратить на определение общего количества нефтяных углеводородов (TPH) способом хроматографии газа в связи с тем, что может быть не полноcтью оценена возможная опасность летучих ароматических соединений (BTEX).

1 January 2012 in Ecological Chemistry and Engineering S
Verified
Journal Article
Closed access
PDF file
SŻSławomir Żak
Sławomir Żak
Treatment of the Processing Wastewaters Containing Heavy Metals with the Method Based on Flotation: The aim of the studies carried out at full technological scale was to indicate optimal systems of the two-stage precipitation and coagulation (PIX 113 - SAX 18, PAX XL1 - SAX 18, ALCAT 102 - lime milk and SAX 18 - PAX 16) in the process of eliminating heavy metals from wastewaters made in the processing plant producing sub-systems for domestic appliances. Precipitated pollutions were thickened by flocculation and separated by hydrogen peroxide enhanced pressure flotation. The experimental installation of maximal flow capacity: 10.0 m3/d consisted of: the storage-equalization tank, the processing pipe reactor, the pressure flotation station, and the reagent preparation and dosing station. Optimal doses of reagents and a flocculent as well as pressure and saturation time were defined for which maximal reductions in the load of heavy metals were achieved. The usefulness of hydrogen peroxide as a means of enhancing flotation was tested. The use of two-stage precipitation permitted the reduction in heavy metals (Cd, Cu, Cr, Ni, Sn, Zn), eg by applying ALCAT 102 - lime milk at the level exceeding 80%.

1 January 2005 in Environmental Technology
Verified
Journal Article
Closed access
SŻSławomir Żak
Sławomir Żak
The paper presents the results of the research conducted with the use of hydrogen peroxide and iron (II) sulfate or chloride in the chemical pretreatment of Saccharomyces cerevisae yeast industry wastewater. It was found that the use of Fenton's system permitted a high reduction of sugar-like substances and total decolorizing of non-sugar compounds. The level of COD reduction depended on the amount and mutual proportions of COD:Fe(II):H2O2, as well as a type of the applied salt Fe(II). For iron concentrations: 1000-4000 mg l-1 with molar excess [H2O2]:[Fe(II)] – 2-14:1 and reaction pH – 3.1-3.4, very high reproducibility of results and the COD reduction exceeding 75 % were obtained. For this range of the reagent concentrations, the distribution of COD reduction values correlated with the equation: COD = − Ax4 + Bx3 − Cx2 + Dx − E (where: x = [H2O2]:[Fe(II)]). Additional neutralization with the use of lime milk made the secondary reduction of CODr(CaO) value possible, which resulted in the reduction of the total CODT above 90 %. The method enabled us to consider the possibility of the preliminary chemical elimination of the wastewater load, which might increase the effectiveness of working wastewater treatment plants, especially in cases of continuous and occasional overloads above the level assumed by the project.

1 February 2008 in Environmental Technology
Verified
Journal Article
Closed access
ZPZ. Pawlak
Z. Pawlak
TRT. Rauckyte
T. Rauckyte
SŻSławomir Żak
Sławomir Żak
PPP. Praveen
P. Praveen
Of the various sources of arsenic released in to the environment, the presence of arsenic in water probably poses the greatest threat to human health. Arsenic is released in to the environment through water by dissolution of minerals and ores. Natural release is slow, but in some areas the concentration of arsenic in groundwater (commonly referred to as Acid Mine Drainage (or AMD)) is accelerated by mining activity. In fact the presence of arsenic may last a long time even after the mining activity has ceased. Hence it is imperative to study the quality of water (especially for those areas in the vicinity of mines) used for different purposes to identify an appropriate remediation technique for effective pollution control. In this paper, contents of arsenic and other metals in the water were quantified from three different sources: (1) groundwater from the mining tunnel (Judge tunnel), (2) drinking water, and (3) water used in the hydrant‐flushed distribution system (Park City) in Utah (USA). The results showed the content of arsenic from the mining tunnel, after chlorination, and in tap water were below 10 μgl−1. However, significant amounts of arsenic, lead, zinc, iron, manganese and antimony have been found in water samples taken from the distribution systems. In the consideration of the further use of mine groundwater for drinking purposes and the distribution system, Park City should regularly be maintained by a flushing program in the distribution system.

1 March 2014 in Ecological Chemistry and Engineering S
Verified
Journal Article
Open access
PDF file
SŻSławomir Żak
Sławomir Żak
TRTeresa Rauckyte-Żak
Teresa Rauckyte-Żak
ALAlfredas Laurinavičius
Alfredas Laurinavičius
PSPaweł Siudziński
Paweł Siudziński
This paper presents the results of the research conducted on the installation designed for physico-chemical pretreatment of technological wastewater in the volume of up to 5.0 m 3 /day discharged from the production of protective and decorative coating materials used for wooden surfaces. The subject-matter installation constructed on a mobile pallet, consisted of a storage-averaging tank where concentrations were equalised with the use of circulation aeration and mixing. A variant, preliminary pre-oxidation with the use of hydrogen peroxide was conducted in this tank. A substantial installation set for the wastewater treatment plant consisted of two preliminary tube reactors, one cylindrical-conical processing reactor, stations for preparing and dispensing reagents and the sediment dewatering station. Considerable reductions in main chemical indicators of water pollution were obtained in the installation: both total suspended solids (TSS) and ether extract (EE) - more than 98%, chemical oxygen demand (COD) - 46-54%, biochemical oxygen demand (BOD 5 ) - 39-46%, and free formaldehyde (HCHO) - 14-27% due to the use of pre-oxidation and the acid - alkaine double coagulation by applying the ALCAT 105 - SAX 25 system. The use of pre-oxidation with hydrogen peroxide in doses 250.0-450.0 mg/l and then two-stage coagulation resulted in an increase in the reduction of: COD and BOD 5 by ca 10-15%, and HCHO by ca 58-66% with reference to the water pretreatment without pre-oxidation. The assessment of sediments formed during the process of pretreatment was made determining the leachable forms of metals (Cu, Ni and Ti) according to methodology of TCLP in compliance with the US EPA Method 1311.