Microscopic and physico-chemical methods were used for a comprehensive surface characterization of different mechanically modified stainless steel surfaces. The surfaces were analyzed using high-resolution confocal microscopy, resulting in detailed information about the topographic properties. In addition, static water contact angle measurements were carried out to characterize the surface heterogeneity of the samples. The effect of morphological anisotropy on water contact angle anisotropy was investigated. The correlation between topography and wetting was studied by means of a model of wetting proposed in the present work, that allows quantifying the air volume of the interface water drop-stainless steel surface.
17 March 2024 in Journal of Food Process Engineering
The potential of adaptive tank cleaning devices to reduce resource consumption of cleaning processes is quantified on the example of a dairy tank under production conditions. As methodological approach, a cleaning validation process was applied to obtain information on the resource consumption of the existing cleaning procedure as reference. An improved cleaning procedure with increased mechanical cleaning action was designed. It exploits the capabilities of motor‐driven jet cleaners to perform helical, zigzag, spiral and meander‐shaped nozzle movements. The nozzle movements were applied according to the location of cleaning‐critical area and the fouling deposit distribution. The configuration was supported by cleaning simulations. Both cleaning procedure were quantitatively compared. The adapted cleaning process reduced the cleaning time by 32 per cent without compromising the cleanling success. The volumetric flow rate was 55 l/min instead of 130 l/min and the energy requirement for cleaning was lowered by approx. 227,260 kJ per cleaning cycle.Practical applications: Reducing cleaning times, water consumption, and strengthening food safety are essential challenges for food production. The methodical approach for conducting a cleaning validation provides necessary information to systematically address priorities of optimization: (1) reduction of cleaning time, (2) reduction of water consumption, (3) reduction of energy consumption. The optical detection of cleaning‐critical area, fouling deposit distribution and the temporal cleaning process opens the possibility of monitoring the hygiene status and strengthening food safety.The use of adaptive, motor‐driven tank cleaning devices enables the targeted adjustment of cleaning intensity. This enables the targeted cleaning of hard‐to‐clean and easy‐to‐clean tank areas and may reduce resource consumption and cleaning time.