This study investigated a 100% waste-derived material system, using bottom ash (BA) and recycled concrete aggregate (RCA) for sustainable pavement base applications. This innovative approach diverts both construction and power plant waste from landfills while replacing conventional natural aggregates and cement-based binders. Five RCA:BA replacement ratios (90:10 to 50:50) were evaluated with three Na2SiO3:NaOH alkaline activator ratios (1:1, 1:1.5, and 1:2) through unconfined compressive strength (UCS) testing, scanning electron microscopy, energy dispersive X-ray spectroscopy (SEM-EDX), and X-ray diffraction (XRD) analysis. The RCA90BA10 composition with a G/N ratio of 1:2 achieved exceptional performance, reaching 9.14 MPa UCS at 7 days while exceeding the Department of Highways, Thailand, requirement of 2.413 MPa. All geopolymer-stabilized mixtures substantially surpassed minimum specifications, validating the technology for high-traffic pavement applications. Toughness evaluation confirmed superior energy absorption capacity of 107.89 N·m for the optimal formulation. Microstructural characterization revealed that higher G/N ratios promoted extensive sodium aluminosilicate hydrate and calcium silicate hydrate gel formation, creating dense, well-integrated matrices. XRD patterns confirmed successful geopolymerization through pronounced amorphous gel development between 20° and 35° 2θ, correlating directly with mechanical performance improvements. The RCA90BA10 formulation demonstrated optimal balance between reactive aluminosilicate content and structural aggregate framework. This technology offers significant environmental benefits by diverting construction and power plant waste from landfills while achieving mechanical properties superior to conventional materials, providing a scalable solution for sustainable infrastructure development.
1
13 September 2025 in Cleaner Engineering and Technology
Mechanical analysis of resilient and permanent deformation is critical for pavement design and construction, as repeated traffic loading is the primary factor influencing material stability. This study investigates the cyclic mechanical behavior and microstructural characteristics of Recycled Concrete Aggregate (RCA) to evaluate its suitability as a sustainable pavement base material. Geotechnical characterization classified the RCA as a well-graded gravel (GW) adhering to Department of Highways Thailand Type D specifications, with a maximum dry unit weight of 18.85 kN/m³. Multi-stage repeated load triaxial testing was performed to determine resilient modulus and permanent deformation characteristics under varying deviatoric stress states. Results indicated that the RCA exhibits a robust resilient modulus ranging from 125 to 260 MPa. Based on Werkmeister’s and shakedown theory, the material remained within the stable Plastic Creep zone (Range B) across all loading stages (150–450 kPa), demonstrating high resistance to incremental collapse. Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) analyses revealed a complex matrix of carbonated adhered mortar and quartz-rich natural aggregates. While the porous interfacial transition zone (ITZ) contributed to elevated water absorption (6.65–7.46%), the non-plastic nature of cementitious fines prevented moisture-induced instability. The integration of macro-mechanical results with micro-scale mineralogical findings validates that RCA provides sufficient structural integrity for high-traffic pavement foundations. This research supports the transition toward a circular economy in Thailand’s infrastructure sector by providing a technical basis for the wide-scale implementation of recycled construction and demolition waste in transportation projects.