Oily wastewater is extensively generated during the petroleum extraction and refining processes, as crude oil production water and from the effluent systems in petrochemical enterprises. The discharge standards for such wastewater are stringent, with the Oslo–Paris Convention stipulating that the oil content must be below 30 mg/L for permissible discharge. Flotation, a conventional oil–water separation method, relies on the collision and adhesion of rising bubbles with oil droplets in water to form low-density aggregates that float to the surface for separation. The collision and adhesion mechanisms between bubbles and oil droplets are fundamental to this process. However, systematic studies on their interactions remain scarce. This study employs the extended Derjaguin–Landau–Verwey–Overbeek theory to analyze the three mechanical interactions during the collision–adhesion process theoretically and investigates the heterogeneous interaction dynamics experimentally. Furthermore, given the diverse liquid-phase environments of oily wastewater, the effects of salinity, pH, and surfactant concentration are decoupled and individually explored to clarify their underlying mechanisms. Finally, a solution is proposed to enhance the flotation efficiency fundamentally. This work systematically elucidates the influence of liquid-phase environments on the adhesion behavior for the first time through the unification of theoretical and experimental approaches. The findings provide critical insights for advancing flotation theory and guiding the development of novel coagulants.
The behavior of petroleum pool fires has important implications for fire safety and environmental protection due to heat release, smoke generation, and pollutant emissions. In this study, controlled pool-fire experiments were conducted using representative petroleum fuels with multiple pan diameters to investigate the coupled effects of fuel properties and geometric scale on combustion behavior and emission characteristics. Key parameters, including the heat release rate, smoke production rate, mass loss rate, major gaseous emissions, and soot characteristics, were systematically measured. The results show that increasing pan diameter accelerated fire development, increased combustion intensity, and generally enhanced cumulative gaseous emissions. Compared with kerosene, gasoline exhibited more rapid combustion and higher smoke production, whereas kerosene produced a more sustained heat-release process and higher cumulative gaseous emissions. Correlation analysis, principal component analysis, and principal component regression revealed that fuel thermophysical properties and geometric scale are the dominant factors governing combustion behavior and pollutant formation. The proposed statistical framework provides a practical approach for quantitatively relating fuel properties to heat-release characteristics. These findings improve the understanding of the coupled effects of fuel composition and fire scale on petroleum pool-fire behavior and provide experimental support for fire hazard assessment and combustion modeling.