Polarimetric radar systems are beneficial for identifying and classifying targets but require multiple transmit or receive channels with different polarizations. This leads to a high hardware effort and thus higher costs. To use a single, linear polarized radar sensor as a polarimetric system, a frequency dependent, polarization rotating reflector which can be placed in front of the radar antenna is presented. The reflector is based on a frequency selective surface (FSS) consisting of slot-excited substrate integrated waveguide (SIW) resonators. Resonator modes are analyzed and an equivalent circuit diagram to describe the filter functionality is developed. For using the described FSS as reflective structure, the design focuses on 45° oblique incidence. Different field vectors for normal and oblique incident angles are considered and different cavity modes for these cases are analyzed. An undesired mode is suppressed by an additional plated through via hole and slot impedances are matched. Reflector designs for normal and oblique incident angles are presented for 15 GHz (Ku-band) and afterwards adapted to 35 GHz (Ka-band). The frequency band of operation with 12% fractional bandwidth is divided into two 45% sub bands which allows a frequency dependent polarization rotation of a linear polarized electromagnetic wave. Investigations on the fabrication accuracies are presented and reflectors for both bands are manufactured. Measurements are performed with a vector network analyzer and results fit well to the simulated curves. In the band of polarization rotation reflection, the matching is better than -13 dB and dielectric losses of less than 1 dB are achieved.
6 November 2024 in IEEE Antennas and Wireless Propagation Letters
Realistic modeling of the unmanned aerial vehicle (UAV) radar cross section (RCS) is vital for integrated sensing and communication (ISAC) channel modeling, ensuring accurate sensing performance prediction and evaluation. Despite advancements in the UAV RCS research, the existing experimental data remains insufficient and a realistic model is not yet established. This study presents an experimental analysis and modeling of UAV RCS. First, we conduct mono-static UAV RCS measurements in an anechoic chamber, recording RCS covering frequency band of $1.8\sim 18.2$ GHz and azimuth angles of $-90^\circ \sim 90^\circ$ (given the symmetry of the UAV). Subsequently, the measured RCS data is fitted using three well-known distributions, Rician, Gamma, and LogNormal. Our analysis reveals the superiority of the Rician distribution in modeling UAV RCS, according to the performance evaluation of the fittings. Detailed distribution parameters are provided for UAV RCS realization. Furthermore, a statistical assessment of the UAV RCS based on the modeling result is conducted, offering insights for predicting and evaluating the UAV sensing. These findings contribute to advancing ISAC channel research and practical applications.
The decomposition of polarimetric radar cross-section images into Huynen parameters is useful for distinguishing different scattering mechanisms which can occur at a radar target. However, if several of these mechanisms superimpose within one resolution cell the result of this decomposition can be misleading. In this paper the combination of a decomposition into Huynen parameters with Principal Component Analysis is proposed. This combination allows to separate three decorrelated scattering centers to reveal scattering mechanisms covered by mechanisms with higher radar cross-section. The application to measurement data demonstrates the success of this approach.
We describe a novel approach to extract Huynen–Euler parameters from a polarimetric scattering matrix. In contrast to existing methods, this technique is able to determine the full set of parameters while requiring the handling of only four special cases via case distinction. Results from a Monte‐Carlo simulation show that the maximum error caused by the decomposition is close to floating point accuracy.
To be able to demonstrate the performance of new algorithms and research results in the area of inverse synthetic aperture radar (ISAR) imaging and radar-cross section measurements, a comparison standard is needed. Such reference targets should not only allow a comprehensive comparison of measurement results, but also show the applicability of new ideas to real-world problems. Therefore we designed a reference target with the shape of a ship following a previously developed requirements catalogue. By performing measurements of the radar cross-section and applying ISAR imaging, we could demonstrate that the target fulfills the requirements.
Synchronisation of radar systems can be used to suppress interference and enable communication between radars. In this paper, a generalised Kuramoto model is proposed, which can be used to synchronise pulse repetition frequencies of two radars over‐the‐air. The generalised approach allows the adjustment of a sampling factor which influences the convergence of the two pulse repetition frequencies. Furthermore, sampling criteria are derived, which can be used to estimate whether convergence occurs. Finally, it is shown by means of simulation that the model together with the criteria allows to reliably predict convergence and to perform synchronisation.