Venkatesan Sorakka Ponnappan

Dr. Venkatesan Sorakka Ponnappan


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2014 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
VPVenkatesan Sorakka Ponnappan
Venkatesan Sorakka Ponnappan
PKP.N. Kadiresh
P.N. Kadiresh
Aqueous cerium oxide at the rate of 50cc per liter was dispersed into diesel and diesel–biodiesel using mechanical agitator and an ultrasonicator for preparing the test fuels. Cerium oxide nanomaterials present in the aqueous cerium oxide exhibit higher catalytic activity because of their large contact surface area per unit volume and can react with water at high temperature to generate hydrogen and improve fuel combustion. Also, cerium oxide nanomaterials act as oxygen buffers causing simultaneous oxidation of hydrocarbons (HCs) as well as the reduction of oxides of nitrogen. The neat diesel and test fuels were tested in an engine without changing the engine system at 0%, 25%, 50%, 75% and 100% load condition and resulted in a considerable enhancement in the brake thermal efficiency, improved brake-specific fuel consumption and decreased concentration of HC, NOx and smoke in the exhaust emitted from the diesel engine due to incorporation of aqueous cerium oxide in the test fuels.

3 February 2020 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
VPVenkatesan Sorakka Ponnappan
Venkatesan Sorakka Ponnappan
SGS. Ganesan
S. Ganesan
JPJ. Joshua Prabhahar
J. Joshua Prabhahar
VKVenkateswara Rao Kaveti
Venkateswara Rao Kaveti
AAAkhil Anoop
Akhil Anoop
AAAghil Andrew
Aghil Andrew
The current crisis of fossil fuels along with the increasing cost of fossil fuels, the growing population of vehicles and emissions from these fuels are made to a search of substitute fuels for the combustion ignition engines. The best alternative for diesel is considered to be biodiesel because of its distinctive properties such as a crucial reduction in greenhouse gas emissions, non-sulphur emissions, non-particulate matter pollutants, low toxicity, and biodegradability. The fuels, the Prosopis juliflora biodiesel blended with diesel were identified and tested in this research work. The biodiesel is produced by transesterification of Prosopis juliflora seed oil with methanol in the presence of either alkaline or strong acid catalysts. The various properties of their blends are calculated and compared with those of diesel. This investigation evaluates thermal efficiency, fuel consumption, and emission characteristics of Prosopis juliflora blends in a diesel engine, and the results are compared with neat diesel.

28 November 2018 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
JHJ. Hemanandh
J. Hemanandh
SGS. Ganesan
S. Ganesan
RDR. Devaraj
R. Devaraj
VPVenkatesan Sorakka Ponnappan
Venkatesan Sorakka Ponnappan
GRG. Ramprakash
G. Ramprakash
Due to increase in passenger car demand, automobile manufacturers are forced to introduce efficient methods to develop new engines in less time. Computer based simulation helps in the development of new engines in less time and efficient engines. In this study the intake manifold, port layout, and flow through intake manifold were varied with length and runner area. The optimized results showed enhancement in volumetric efficiency of the engine.

18 June 2018 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
VPVenkatesan Sorakka Ponnappan
Venkatesan Sorakka Ponnappan
SGS. Ganesan
S. Ganesan
RDR. Devaraj
R. Devaraj
JHJ. Hemanandh
J. Hemanandh
The design geometry of exhaust manifold plays a vital role in smooth combustion and emission reduction of the spark ignition engine. In this work, by analysing and comparing the exhaust gas back pressures and its velocities of different types of manifold models chosen at different operating load conditions of the engine, the best exhaust manifold of model 5 has been found and recommended to use in the multi-cylinder engine to control the engine emission and protect the environment. The analysis is done with a virtual model of manifold. Modelling and analysis of exhaust manifold are carried out by CATIA v5 and ANSYS software.

24 December 2018 in Journal of Energy Resources Technology
Verified
Journal Article
Closed access
PDF file
VPVenkatesan Sorakka Ponnappan
Venkatesan Sorakka Ponnappan
PKP. N. Kadiresh
P. N. Kadiresh

19 September 2019 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
VPVenkatesan Sorakka Ponnappan
Venkatesan Sorakka Ponnappan
PKParthasarathy Natarajan Kadiresh
Parthasarathy Natarajan Kadiresh
NBNagappan Beemkumar
Nagappan Beemkumar
JJJeya Jeevahan
Jeya Jeevahan
Finding the new fuel blend as a green fuel by mixing aqueous zinc oxide nanofluid with diesel to improve diesel engine combustion and performance is the aim of this study. Varying the nanofliud dosing level in diesel from 30 cc to 60 cc, four blends are prepared and their properties are measured. Engine performance tests are conducted with the blends and the best blend is identified as D + 50ZN. The energetic nanoparticles present in the aqueous nanofluid possess large surface area per unit volume, it exhibits high catalytic activity with hydrocarbon causing oxidation of hydrocarbon and also micro explosion phenomena of aqueous nanofluid blend helps to evaporate the blend quickly as soon as the fuel injected from injector with high speed and some millimeters away from the normal spay limit leading to quick preparation of charge during the delay period. Hence, the fuel is completely burnt during the combustion period. Among all blends, The D + 50ZN showed a maximum improvement of about 5.38% in brake thermal efficiency and remarkable reduction in NOX, smoke, HC, and CO is observed as 12.97%, 22.08%, 24.54%, and 10.34%, respectively at maximum rated power output. Abbreviation: ASTM: American Society for Testing and Materials; aTDC: After Top Dead Center; BP: Brake Power; BSFC: Brake Specific Fuel Consumption; bTDC: Before Top Dead Center; BTE: Brake Thermal Efficiency; CO: Carbon Monoxide; DDSA: Dodecenyl Succinic Anhydride; EDS: Energy Dispersive Spectroscopy; HC: Hydrocarbons; JCPDS: Joint Committee on Powder Diffraction Standards; NOX: Oxides of Nitrogen; ppm: Part Per Million; SEM: Scanning Electron Microscope; XRD: X-Ray Diffraction Pattern; ZN: Aqueous Zinc Oxide Nanofluid; ZnO: Zinc Oxide