With the rapid development of wireless communications, cellular communication and distributed wireless network are fragile to eavesdropping due to distributed users and transparent communication. However, to adopt bigger transmit power at a given area to interfere potential eavesdroppers not only incurs huge energy waste but also may suppresses regular communication in this area. To this end, we focus on secure communication in multi-hop wireless communication network, and propose two communicating while jamming schemes for secure communication in presence of potential eavesdroppers for the narrow band and broad band point-to-point (P2P) systems respectively with the aid of artificial noise transmitted by a chosen cooperative interferer. Furthermore, to achieve the end-to-end (E2E) multi-hop secure communication, we devise the secure network topology discovering scheme via constructing a proper network topology with at least one proper node as the cooperative interferer in each hop, and then propose the secure transmission path planning scheme to find an E2E secure transmission route from source to destination, respectively. Experiments on the wireless open-access research platform demonstrate the feasibility of the proposed schemes. Besides, simulations results validate that the proposed schemes can achieve better performance compared with existing methods in both the P2P communication case and E2E multi-hop communication network scenario.
Currently, recognition and assessment of human posture have become significant topics of interest, particularly through the use of visual sensor systems. These approaches can effectively address the drawbacks associated with traditional manual assessments, which include fatigue, variations in experience, and inconsistent judgment criteria. However, systems based on visual sensors encounter substantial implementation challenges when a large number of such sensors are used. To address these issues, we propose a human posture recognition and assessment system architecture, which comprises four distinct subsystems. Specifically, these subsystems include a Visual Sensor Subsystem (VSS), a Posture Assessment Subsystem (PAS), a Control-Display Subsystem, and a Storage Management Subsystem. Through the cooperation of subsystems, the architecture has achieved support for parallel data processing. Furthermore, the proposed architecture has been implemented by building an experimental testbed, which effectively verifies the rationality and feasibility of this architecture. In the experiments, the proposed architecture was evaluated by using pull-up and push-up exercises. The results demonstrate that the proposed architecture achieves an overall accuracy exceeding 96%, while exhibiting excellent real-time performance and scalability in different assessment scenarios.
Currently, recognition and assessment of human posture has become significant topics of interest, particularly through the use of visual sensor systems. These approaches can effectively address the drawbacks associated with traditional manual assessments, which include fatigue, variations in experience, and inconsistent judgment criteria. However, systems based on visual sensors encounter substantial implementation challenges when a large number of such sensors are used. To address these issues, we propose a human posture recognition and assessment system architecture, which comprises four distinct subsystems. Specifically, these subsystems include a Visual Sensor Subsystem (VSS), a Posture Assessment Subsystem (PAS), a Control-Display Subsystem, and a Storage Management Subsystem. Through the cooperation of subsystems, the architecture has achieved support for parallel data processing. Furthermore, the proposed architecture has been implemented by building an experimental testbed, which effectively verifies the rationality and feasibility of this architecture. In the experiments, the proposed architecture was evaluated by using pull-up and push-up exercises. The results demonstrate that the proposed architecture achieves an overall accuracy exceeding 96%, while exhibiting excellent real-time performance and scalability in different assessment scenarios.
Currently, the primary random access protocol for satellite communications is Irregular Repetition Slotted ALOHA (IRSA). This protocol leverages interference cancellation and burst repetition based on probabilistic distributions, achieving up to 80% channel utilization in practical use. However, it faces three significant issues: (1) low channel utilization with smaller frame sizes; (2) drastic performance degradation under heavy load, where channel utilization can be lower than that of traditional Slotted ALOHA; and (3) even under optimal load and frame sizes, up to 20% of the valuable satellite channel resources are still wasted despite reaching up to 80% channel utilization. In this paper, we propose the Separated Transmission and Control ALOHA (STCA) protocol, which introduces a space–air–ground layered network and separates the access control process from the satellite to an airborne platform, thus preventing collisions in satellite channels. Additionally, the airborne-platform estimates the load to ensure maximum access rates. Simulation results demonstrate that the STCA protocol significantly outperforms the IRSA protocol in terms of channel utilization.
Under China’s dual-carbon strategic goals, large-scale public centralized heating plays a critical role in energy conservation. However, traditional manual open-loop control suffers from high response latency. Furthermore, existing unidirectional predictive methods lack dynamic feedback correction mechanisms. To address these issues, this study proposes an intelligent dual-system collaborative control architecture specifically designed for public heating systems. This architecture utilizes a cloud–edge device framework. It establishes a two-way linkage between heating equipment and the cloud decision platform. Consequently, it constructs an integrated regulation framework encompassing forward decision generation, reverse state verification, and dynamic feedback correction. Specifically, the forward module utilizes a Mamba-structured state-space model to generate data-driven boiler operation strategies. Meanwhile, the reverse module employs a Temporal Convolutional Network with Monte Carlo Dropout (TCN-MC Dropout). This probabilistic network enables state inversion evaluation with reliable uncertainty prediction intervals. These two modules are deeply coupled through an adaptive feedback correction mechanism. Together, they significantly improve system stability and operational robustness under complex thermal disturbances. Specifically, the proposed architecture achieves a room temperature compliance rate exceeding 96% and restricts temperature fluctuations to within . Simultaneously, it reduces boiler energy consumption by over 16.4%. This solution has been successfully deployed in the heating network at Shaanxi Normal University as a representative real-world case study. Ultimately, it provides a practical technical reference for the intelligent upgrading and low-carbon transformation of public centralized heating systems.