Fresh berries contain numerous components that can undergo complex changes during the drying process. This study aims to investigate the effect of freeze-drying on the sensory and chemical properties of black currant and sea buckthorn berries. Freeze-drying was performed at a shelf temperature of 35–55 °C with a step of 5 °C and durations of 18, 20, 22, and 24 h. Comparing the final freeze-dried berries with their fresh counterparts, it was observed that at a shelf temperature of 50 °C and a drying time of 18 to 20 h, there was a minimal loss in the content of vitamins, organic acids, and carbohydrates. However, based on organoleptic evaluations, the best results were achieved after drying for 20 h. Furthermore, the preservation of citric and malic acids in black currant berries, along with citric, tartaric acids, and sucrose in sea buckthorn berries, was only at 45.6% when the freeze-drying time was extended to 22 h. Considering the physical and chemical properties of listed freeze-dried berries, the optimal parameters were identified as a shelf temperature of 50 °C and a drying time of 20 h. The findings from this study serve as a foundation for selecting appropriate freeze-drying parameters for various types of berries.

The object of the study reported in this paper is to establish a dependence of the fatty acid composition of the fast-growing annual plant safflower on the agroclimatic cultivating conditions. The growth rate of safflower and the characteristics of the extracted oil are highly dependent on external temperature and moisture. At low temperatures, for example, the growth of safflower is significantly inhibited. With an increase in temperature and the length of daylight, the central stem begins to branch while growing faster. Flowering is mainly affected by the length of daylight. The period from the end of flowering to maturity is typically 28‒30 days. However, the total ripening period of the crop depends on the variety, location, sowing time, and agro-climatic cultivating conditions. The need for water increases significantly during the flowering period of safflower, which ultimately affects the indicators of the fatty acid composition and yield. At the same time, safflower is sensitive to moisture in terms of disease. In case of excess water, it is subject to root rot. In addition, frequent rains and high humidity after ripening can provoke the germination of seeds on the head. Hence, it follows that in order to obtain a high yield with the specified characteristics of the fatty acid composition of safflower oil, it is necessary to take into consideration the quantitative indicators of moisture and its seasonality, as well as the temperature regime during the growing season. The study was conducted using arid or semi-arid, sharply continental Central Asia with its hot summers and cold winters as an example. The dependence of the physicochemical parameters of plant-derived oils on agroclimatic indicators has been established. The reported results and conclusions will allow farmers to predict the yield of oilseeds with specified characteristics depending on the changing climatic parameters

Urban vertical farming has emerged as a sustainable and innovative approach to addressing the increasing global demand for food in rapidly growing and densely populated cities, where traditional agriculture faces significant challenges due to space and resource constraints. A primary issue in these systems is the efficient management of critical resources, particularly water and energy, which are essential for maintaining high crop productivity and environmental sustainability. This study introduces, develops, and evaluates a mathematical model that integrates Internet of Things (IoT) technology to optimize water and energy usage in a hydroponic vertical farming setup. The model utilizes real-time environmental data collected from IoT sensors to dynamically adjust irrigation and energy consumption, ensuring minimal waste while sustaining optimal conditions for plant growth. Extensive simulations conducted using Python demonstrate substantial improvements in Water Use Efficiency (WUE) and significant energy savings, validating the model’s effectiveness. The study also presents practical case studies from regions like Singapore, Qatar, and Malaysia, showcasing how the integration of renewable energy sources, such as solar photovoltaic panels, with advanced smart irrigation technologies can lead to up to 50% growth rate improvements. Despite existing challenges, such as high initial capital investments, technical complexities, and the need for continuous maintenance, the findings indicate that modular and scalable system designs offer a promising path forward. Future research should aim to reduce overall costs and enhance system adaptability for various urban environments. Ultimately, this research provides a scalable and efficient framework for advancing urban agriculture, with the potential to contribute significantly to global food security and promote the sustainability of urban ecosystems.

This study aimed to design and optimize an edible antimicrobial film incorporating thermally modified starches using a systematic experimental approach. A comprehensive analysis of six starch types—both native and dry heat–modified—was conducted to evaluate their gelatinization clarity, freeze–thaw stability, microstructure (CLSM), and in vitro digestibility. Corn and cassava starches were selected as optimal components based on their physicochemical performance. A series of single-factor experiments and a Box–Behnken design were employed to assess the influence of starch concentration, gelatinization time, glycerol, and chitosan content on film properties including tensile strength, elongation at break, water vapor permeability (WVP), and transparency. The optimized formulation (5.0% starch, 28.2 min gelatinization, 2.6% glycerol, 1.4% chitosan) yielded a transparent (77.64%), mechanically stable (10.92 MPa tensile strength; 50.0% elongation), and moisture-resistant film. Structural and thermal analyses (SEM, AFM, DSC, TGA) confirmed the film’s homogeneity and stability. Furthermore, the film exhibited moderate antioxidant activity and antibacterial efficacy against Escherichia coli and Staphylococcus aureus. These findings demonstrate the feasibility of using dry heat–modified Kazakhstani starches to develop sustainable antimicrobial packaging materials. However, further studies are needed to explore sensory attributes, long-term storage performance, and compatibility with different food matrices.

In the present study, incorporation of sheep tail fat, beef heart, kidneys, and herbal ingredients (grounded licorice and ginger root, pumpkin, carrots, and onions) into liver pate formulations was investigated. Four types of liver pate were prepared: control sample containing only liver and butter; experimental sample S1 - pate with sheep tail fat (5%), ground dried licorice root (1%) and ginger (2%); experimental sample S2 - pate with sheep tail fat (8%), ground dried licorice root (2%) and ginger (3%); experimental sample S3 - pate with sheep tail fat (10%), ground dried licorice root (3%) and ginger (4%). Inclusion of the above-mentioned ingredients in the pate recipe did not cause significant changes in the mass fraction of table salt and protein (P > 0.05) and, conversely, significantly increased the moisture content, carbohydrates, fat and be-ta-carotene in the test sample (P < 0.05). In the experimental samples, the number of amino acids decreased with the exception of arginine. Among the experimental samples, the highest content of amino acids (18 g / 100 g) and essential amino acids (8.89 g/ 100 g) was detected in S1. The results of determining the fatty acid composition showed significant changes in the composition of experimental samples com-pared with the control. The total content of saturated acids in the experimental samples decreased while the content of polyunsaturated and monounsaturated fatty acids increased (P ˂ 0.05). Textural characteristics, such as hardness, cohesiveness and adhe-siveness in the test sample have changed significantly (P < 0.05). However, the elasticity (springiness) and stickiness of the paste mass were almost the same for the control and experi-mental samples. The introduction of the above-mentioned ingredients in the experimental sam-ples increased the pH and water-binding capacity) values, which suggests an increase in juici-ness. The conducted studies have confirmed the prospects for improving the chemical compo-sition without deterioration of the consistency and structure of the finished product.

This study presents a comparative evaluation of four drying methods for carrot, red beet, and pumpkin pomace to produce natural functional food ingredients. The work addresses the valorization of 35–45% vegetable processing waste—a rich source of bioactive compounds—aligning with circular bioeconomy principles and Kazakhstan’s goals for deep processing of agricultural raw materials. The compared methods were convective drying (CD), ultrasound pretreatment + convective drying (US + CD), vacuum-microwave drying (VMD), and ultrasound pretreatment + vacuum-microwave drying (US + VMD). Drying kinetics, water activity, physicochemical and functional properties of powders, retention of bioactive compounds, color characteristics, thermal stability, and sensory attributes were assessed. Kinetics were fitted using Midilli et al., Page, and Weibull models. US + VMD provided the highest drying acceleration (6–11 times faster than CD), reaching final moisture of 5.1–5.9%, water activity a_w 0.27–0.31 in 80–170 min, and bioactive compound retention of 90–95% (carotenoids 92–95%, betalains 90–94%). It also delivered superior flowability (Carr’s index 22.5–30.4%), dispersibility (80–88% in 30 s), and thermal stability (75–85% at 200 °C). Acceleration varied by raw material: maximum for beet (up to 11×) due to soluble sugars and nitrates, minimum for pumpkin (5.5–8×) due to dietary fibers and pectins, and intermediate for carrot (6–9×) influenced by carotenoids’ dielectric properties. The results highlight US + VMD’s strong potential for producing functional powders to replace synthetic additives in food systems. Effective method selection and parameter optimization require consideration of raw material type and rheological characteristics.