Self-growing robots are an emerging solution in soft robotics for navigating, exploring, and colonizing unstructured environments. However, their ability to grow and move in heterogeneous three-dimensional (3D) spaces, comparable with real-world conditions, is still developing. We present an autonomous growing robot that draws inspiration from the behavioral adaptive strategies of climbing plants to navigate unstructured environments. The robot mimics climbing plants’ apical shoot to sense and coordinate additive adaptive growth via an embedded additive manufacturing mechanism and a sensorized tip. Growth orientation, comparable with tropisms in real plants, is dictated by external stimuli, including gravity, light, and shade. These are incorporated within a vector field method to implement the preferred adaptive behavior for a given environment and task, such as growth toward light and/or against gravity. We demonstrate the robot’s ability to navigate through growth in relation to voids, potential supports, and thoroughfares in otherwise complex habitats. Adaptive twining around vertical supports can provide an escape from mechanical stress due to self-support, reduce energy expenditure for construction costs, and develop an anchorage point to support further growth and crossing gaps. The robot adapts its material printing parameters to develop a light body and fast growth to twine on supports or a tougher body to enable self-support and cross gaps. These features, typical of climbing plants, highlight a potential for adaptive robots and their on-demand manufacturing. They are especially promising for applications in exploring, monitoring, and interacting with unstructured environments or in the autonomous construction of complex infrastructures.
Domestication can influence many functional traits in plants, from overall life-history and growth form to wood density and cell wall ultrastructure. Such changes can increase fitness of the domesticate in agricultural environments but may negatively affect survival in the wild. We studied effects of domestication on stem biomechanics in manioc by comparing domesticated and ancestral wild taxa from two different regions of greater Amazonia. We compared mechanical properties, tissue organisation and wood characteristics including microfibril angles in both wild and domesticated plants, each growing in two different habitats (forest or savannah) and varying in growth form (shrub or liana). Wild taxa grew as shrubs in open savannah but as lianas in overgrown and forested habitats. Growth form plasticity was retained in domesticated manioc. However, stems of the domesticate showed brittle failure. Wild plants differed in mechanical architecture between shrub and liana phenotypes, a difference that diminished between shrubs and lianas of the domesticate. Stems of wild plants were generally stiffer, failed at higher bending stresses and were less prone to brittle fracture compared with shrub and liana phenotypes of the domesticate. Biomechanical differences between stems of wild and domesticated plants were mainly due to changes in wood density and cellulose microfibril angle rather than changes in secondary growth or tissue geometry. Domestication did not significantly modify “large-scale” trait development or growth form plasticity, since both wild and domesticated manioc can develop as shrubs or lianas. However, “finer-scale” developmental traits crucial to mechanical stability and thus ecological success of the plant were significantly modified. This profoundly influenced the likelihood of brittle failure, particularly in long climbing stems, thereby also influencing the survival of the domesticate in natural situations vulnerable to mechanical perturbation. We discuss the different selective pressures that could explain evolutionary modifications of stem biomechanical properties under domestication in manioc.
Most tropical lianas have specialized organs of attachment such as twining stems, hooks or tendrils but some do not. Many climbers also have an early self-supporting phase of growth and in some species this can produce treelet-sized individuals. This study focuses on how a liana can climb without specialized attachment organs and how biomechanical properties of the stem are modulated between self-supporting treelets and canopy-climbing lianas. Biomechanics and stem development were investigated in self-supporting to climbing individuals of Manihot aff. quinquepartita (Euphorbiaceae) from tropical rain forest at Saül, central French Guiana. Bending tests were carried out close to the site of growth. Mechanical properties, including Young's elastic modulus, were observed with reference to habit type and changes in stem anatomy during development. This liana species can show a remarkably long phase of self-supporting growth as treelets with stiff, juvenile wood characterizing the branches and main stem. During the early phase of climbing, stiff but unstable stem segments are loosely held in a vertical position to host plants via petiole bases. The stiffest stems – those having the highest values of Young's modulus measured in bending – belonged to young, leaning and climbing stems. Only when climbing stems are securely anchored into the surrounding vegetation by a system of wide-angled branches, does the plant develop highly flexible stem properties. As in many specialized lianas, the change in stiffness is linked to the development of wood with numerous large vessels and thin-walled fibres. Some angiosperms can develop highly effective climbing behaviour and specialized flexible stems without highly specialized organs of attachment. This is linked to a high degree of developmental plasticity in early stages of growth. Young individuals in either open or closed marginal forest conditions can grow as substantial treelets or as leaning/climbing plants, depending on the availability of host supports. The species of liana studied differs both in terms of development and biomechanics from many other lianas that climb via twining, tendrils or other specialized attachment organs.